Coffee extract dyeing on silk fabric using various mordanting agents at different mordanting condition was studied in our previous research. Coffee extract dyeing can exert beautiful colors and have several advantages over the conventional natural dyeing. Since most of natural dyes are expensive for mass production, strongly season and source dependent, and hard to store, and therefore, coffee waste was used as natural dye to create beautiful colors in this study. Coffee waste is inexpensive and easy to store, and provide a comparatively regular quality regardless of season and source. The effects of dyeing condition such as dyeing temperature, dyeing time, and liquor ratio on dyeing characteristics of silk fabrics were investigated. Coffee extract dyed silk showed brilliant colors, and the colors were different with the kind of mordant. Cu, Sn, and Al mordanted silks showed golden yellow with subtle change of hue and value, while Fe mordanted silk showed a brownish green color upon coffee extract dyeing. As the dyeing temperature increased, the dyeability generally increased in all mordanted silk fabrics except Fe mordanted silk until $45^{\circ}C$. The dyeing temperature did not affect the dyeability of Fe mordanted silk fabric. As the liquor ratio increased, the dyeability showed a gradual increase in all mordanted silk except Cu mordanted silk. Cu mordanted silk fabric showed an abrupt increase in dyeability at liquor ratio1:150. The dyeing time effect can be separated into 2 stages. During the initial half an hour, the dyeability did not change significantly, and then, increased after 45 min. dyeing time duration. A further increase in dyeing time after 45 min. did not affect the dyeing efficiency in all mordanted silk fabrics except the Cu mordanted.
Le fort II osteotomy is much useful technique to correct the midfacial hypoplasia including nasomaxillary complex especilly in patient with dish face appearance. Not in simple orthognathic surgery but in Le Fort II osteotomy, the standardization of prognostic value is essential in treatment planning to achieve satisfactory postoperative results. According to pervious reports, the ratio of soft tissue change to hard tissue movements varies as to different surgical methods and different facial regions. But there are few report about the ratio of soft tissue change to hard tissue movement following Le Fort II osteotomy. So we tried to develop standarized soft tissue surgical treatment objective. We have followed up 16 patients, who had received Le Fort II osteotomy by one operator from 1990 to 1996, one year postoperatively. In cephalometrics, we used Frankfort line as horizontal reference line, and vertical reference line as one drawn from Sella to horizontal line perpendicularly. The landmarks are G to soft tissue G, N on reference line to soft tissue N, ANS to Pn and A to Sn. The results are as follows. 1. The value of soft tissue change to hard tissue movement showed positive correlation, having statistical significancy at G, N2, N3 point. 2. At G, N2, N3 point, the ratio of soft tissue change to hard tissue movement was 0.51, 0.98 and 0.80 respectively and showed statistical significancy, while at N1, ANS, A point, that was 0.72, 0.49 and 0.26 but didn't showed statistical significance. 3. This result shows much the same change of the soft tissue change to hard tissue movement on the upper nasomaxilla, and less the same change on the lower maxilla and so the Le Fort II osteotomy can be recommended as a reliable effective operation method for correction of nasomaxillary retrusion.
본 연구에서는 강진 고성사 청동보살좌상을 대상으로 과학적 분석을 통해 불상의 제작기술 및 납 원료산지에 대한 연구를 실시하였다. 불상에서 수습한 극미량의 시료를 대상으로 미세조직 관찰결과 주조 공정을 통해 제작되었음을 알 수 있었다. 이어 SEM-EDS를 통한 합금조성비 분석결과 구리(Cu) 81.26wt% 주석(Sn) 16.42wt%, 납(Pb) 1.72wt%의 삼원계 합금으로 확인되었다. 열이온화질량분석기(TIMS)를 이용한 납동위원소비 분석결과를 한반도 납동위원소비 분포도에 대입한 결과 전라도와 충청도 지역, 경상남·북도 지역에 도시되었다. 불상이 봉안된 강진 고성사는 해당영역의 사이에 위치하고 있다. 이러한 과학적 분석결과를 종합해 볼 때 강진 고성사 청동보살좌상은 구리, 주석, 납을 합금하여 주조하였으며, 불상제작 시 사용된 납 원료는 고성사 인근 지역에서 수급하여 사용한 것으로 판단된다. 이때 주목할 점은 해당 불상이 높이 51cm의 중·대형 불상임에도 불구하고 합금조성비 분석결과 기존 선행연구에서 제시한 소형 청동 및 금동제 불상의 납 함량비와 유사한 경향성을 보이고 있다는 것이다. 이에 불상의 크기와 납 함량비 간의 연관성을 고찰하고자 고성사 청동보살좌상과 조성연대가 유사한 청동 및 금동제 불상의 형태학적 특징 및 합금조성비 등 전반적인 제작기술을 비교분석 하였다. 비교결과 청동 및 금동제 불상의 합금조성비를 결정하는 요인에는 불상의 크기 뿐만 아니라 양식적인 특징, 조성연대 등 다양한 요인이 존재할 수 있으며, 이에 따라 불상을 조성할 당시 합금조성비 또는 주조기술을 적절히 조절하였을 가능성을 확인하였다. 즉, 불상의 제작기술 연구를 위해서는 방사선 투과촬영조사 등을 활용한 내부구조 관찰, 미세조직관찰 및 합금조성비 분석 등의 과학적 분석결과 뿐만 아니라 양식적 특징 및 조성연대에 관한 고고·미술사학적 연구를 함께 진행함으로서 보다 종합적인 불상 제작기술체계에 대한 규명이 이루어져야 할 것으로 판단된다.
Sheanut cake (SNC), expeller (SNE) and solvent extractions (SNSE) samples were evaluated to determine their suitability in animal feeding. The CP content was highest in SNSE (16.2%) followed by SNE (14.7%) and SNC (11.6%). However, metabolizable energy (ME, MJ/kg) was maximum in SNC (8.2) followed by SNE (7.9) and SNSE (7.0). The tannin phenol content was about 7.0 per cent and mostly in the form of hydrolyzable tannin (HT), whereas condensed tannin (CT) was less than one per cent. The in vitro gas production profiles indicated similar y max (maximum potential of gas production) among the 3 by-products. However, the rate of degradation (k) was maximum in SNC followed by SNE and SNSE. The $t^{1/2}$ (time taken for reaching half asymptote) was lowest in SNC (14.4 h) followed by SNE (18.7 h) and SNSE (21.9 h). The increment in the in vitro gas volume (ml/200 mg DM) with PEG (polyethylene glycol)-6000 (as a tannin binder) addition was 12.0 in SNC, 9.6 in SNE and 11.0 in SNSE, respectively. The highest ratio of $CH_4$ (ml) reduction per ml of the total gas, an indicator of the potential of tannin, was recorded in SNE (0.482) followed by SNC (0.301) and SNSE (0.261). There was significant (p<0.05) reduction in entodinia population and total protozoa population. Differential protozoa counts revealed that Entodinia populations increased to a greater extent than Holotricha when PEG was added. This is the first report on the antimethanogenic property of sheanut byproducts. It could be concluded that all the three forms of SN byproducts are medium source of protein and energy for ruminants. There is a great potential for SN by-products to be incorporated in ruminant feeding not only as a source of energy and protein, but also to protect the protein from rumen degradation and suppress enteric methanogenesis.
1-L stirred-batch type reactor에서 기질들의 몰 비율을 1:2:2(corn oil:capric acid:CLA)하고 RM IM lipase을 사용하여 재구성 지질을 합성하였다. 합성된 재구성 지질은 총 capric acid 와 CLA을 각각 13.3 mol%와 8.9 mol% 함유하였다. 기능성 지방산은 주로 sn-1,3 position에 분포하였고, sn-2 position에는 linoleic acid가 대부분이었다. 재구성 지질의 요오드가와 비누화가는 68과 202이었고, 이는 재구성 지질에 함유된 capric acid 때문이었다. 반응 후 재구성 지질의 총 tocopherol 함량은 약 39% 감소하였다. 색도분석결과, 재구성 지질과 옥배유 서로간에 백색도$(L^*)$와 적색도$(a^*)$에서는 유의적 차이가 없었으나, 황색도$(b^*)$에서는 재구성 지질이 옥배유보다 yellowness를 보이며 유의적 차이를 보였다(p<0.05). RP-HPLC 분석결과 재구성 지질에서 capric acid를 함유하고 있는 TAG형태의 PN은 26-44로 전체의 약 34.2 area% 차지함을 알 수 있었다. 또한 옥배유가 $-56.77^{\circ}C$에서 주된 crystallization peak 정점을 보인 반면에, 재구성 지질은 $-46.2^{\circ}C$에서 주된 peak 정점을 나타내었다.
Scale-up하기 위하여 24시간동안 1:2:2의 몰 비율로 stirred-batch type reactor에서 합성된 재구성지질은 capric acid와 CLA를 각각 4.9 mol%와 4.1 mot% 함유하였다. 기능성 지방산인 capric acid와 CLA는 주로 TAG의 sn-1,3 position에 분포하였고, sn-2 position에는 linoleic acid가 대부분을 차지하였다. 재구성지질과 대두유의 요오드가는 각각 126와 114이었고, 비누화가는 각각 190과 194로 측정됨으로써, 재구성 지질의 TAG에서 capric acid의 함유를 확인할 수 있었다. 대두유와 재구성지질의 tocopherol함량은 각각 74.6 mg/100 g과 18.2 mg/100 g으로, 재구성지질의 tocopherol 함량은 대두유보다 약 76% 감소하였다. 색도분석 결과, 재구성 지질과 대두유간에 백색도(L*)와 적색도(a*)에서는 유의적 차이가 없었으나(p<0.05),황색도(b*)에서 재구성지질이 대두유보다 좀더 yellowness를 보이며 유의적 차이를 보였다. (p<0.05). Reversed-phase HPLC 분석 결과, 재구성지 질에서 capric acid를 함유하고 있는 TAG형태의 partition number (PN)는 25∼37로 약 12.57 area%이었음을 확인하였다. 대두유의 주된 crystallization peak는 -57.86$^{\circ}C$C이었으나, capric acid를 4.9 mol% 함유하고 있는 재구성지질의 crystallization peak는 -52.78$^{\circ}C$로 대두유보다 결정화가 좀더 고온에서 일어났다.
The robotic $CO_2$ welding is a manufacturing process to produce high quality joints for metal and it could provide a capability of full automation to enhance productivity. Despite the widespread use in the various manufacturing industries, the full automation of the robotic $CO_2$ welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this research, an attempt has been made to develop an intelligent algorithm to predict the weld geometry (top-bead width, top-bead height, back-bead width and back-bead height) as a function of key process parameters in the robotic $CO_2$welding. To achieve this above objective, Taguchi method was employed using five different process parameters (tip gap, gas flow rate, welding speed, arc current, welding voltage) as a guide for optimization of process parameters.
전북 완주 신풍유적 출토 고려시대 슬래그와 송풍관을 대상으로 신풍유적의 야동기술(冶銅技術)성격을 확인하고, 납 원료산지를 추정하기 위해 납동위원소비를 실시하여 알아보았다. 성분분석 결과, Cu-Sn-Pb 삼원계 합금하는 과정에서 비롯된 슬래그와 송풍관으로 해석되었다. 금속현미경과 주사전자현미경(scanning electron microscopy-energy dispersive spectrometer) 분석결과, 동괴와 주석괴에 방연석을 첨가하여 완제품 제작을 위한 중간소재를 생성하는 합금단계에서 발생한 부산물로 추정된다. 납동위원소비분석 결과, 한국 남부 Zone III 지역의 광산에서 채굴된 방연석을 사용하여 합금한 것으로 판단된다. 송풍관은 송풍관의 외측으로 갈수록 Mullite가 검출되어, 1,000℃ 내외에서 조업이 이뤄졌을 가능성이 있다.
목적: 본 연구에서는 투명 전도막으로 사용할 안티몬주석산화물 박막의 특성변수인 RF 전력, T-S간 거리 등의 변화에 따른 박막의 광학적, 전기적, 구조적 특성을 알아보았다. 방법: 안티몬주석산화물 박막을 마그네트론 스퍼트링 방법으로 실온에서 $SnO_2:Sb_2O_5$= 95:5 wt%의 비율로 제작하였다. 결과: 안티몬주석산화물 박막은 RF 입력전력에 가장 민감한 특성변화를 보였는데, 30W의 RF 입력전력에서 광투과율이 78%, 표면거칠기가 0.56 nm, 면저항이 1007 $\Omega{\cdot}cm^{-2}$이었다. 결론: 안티몬주석산화물 박막은 T-S간 거리와 RF 전력에 따라 구조적, 광학적 및 전기적 특성이 크게 달라지는 것을 확인하였다.
Jeon, H.K.;Lee, J.K.;Yang, D.S.;Kang, W.N.;Kang, B.
한국초전도ㆍ저온공학회논문지
/
제18권4호
/
pp.1-4
/
2016
We investigated the relation between the Cu-O bond length and the superconducting properties of $BaSnO_3$ (BSO)-added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films by using extended x-ray absorption fine structure (EXAFS) spectroscopy. 4 wt.% $BaSnO_3$ (BSO) added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films with varying thickness from $0.2{\mu}m$ to $1.0{\mu}m$ were fabricated by using pulsed laser deposition (PLD) method. The transition temperature ($T_c$) and the residual resistance ratio (RRR) of the GdBCO films increased with increasing thickness up to $0.8{\mu}m$, where the crystalline BSO has the highest peak intensity, and then decreased. This uncommon behaviors of $T_c$ and RRR are likely to be created by the addition of BSO, which may change the ordering of GdBCO atomic bonds. Analysis from the Cu K-edge EXAFS spectroscopy showed an interesting thickness dependence of ordering behavior of BSO-added GdBCO films. It is noticeable that the ordering of Cu-O bond and the transition temperature are found to show opposite behaviors in the thickness dependence. Based on these results, the growth of BSO seemingly have evident effect on the alteration of the local structure of GdBCO film.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.