• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.4
• /
• pp.39-46
• /
• 2003

Sn-Cu eutectic solder bump was fabricated by electroplating for flip chip and its characteristics were studied. A Si-wafer was used as a substrate and the UBM(Under Bump Metallization) of Al(400 nm)/Cu(300 nm)/Ni(400 nm)/Au(20 nm) was coated sequentially from the substrate to the top by an electron beam evaporator. The experimental results showed that the plating ratio of the Sn-Cu increased from 0.25 to 2.7 $\mu\textrm{m}$/min with the current density of 1 to 8 A/d$\m^2$. In this range of current density the plated Sn-Cu maintains its composition nearly constant level as Sn-0.9∼1.4 wt%/Cu. The solder bump of typical mushroom shape with its stem diameter of 120 $\mu\textrm{m}$ was formed through plating at 5 A/d$\m^2$ for 2 hrs. The mushroom bump changed its shape to the spherical type of 140 $\mu\textrm{m}$ diameter by air reflow at $260^{\circ}C$. The homogeneity of chemical composition for the solder bump was examined, and Sn content in the mushroom bump appears to be uneven. However, the Sn distributed more uniformly through an air reflow.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.1
• /
• pp.69-74
• /
• 2006

Thick film $H_2$ sensors were fabricated using $SnO_2$ loaded with $Ag_2O$ and $PtO_x$. The composition that gave the highest sensitivity for $H_2$ was in the weight% ratio of $SnO_2 : PtO_x : Ag_2O$ as 93 : 1 : 6. The nano-crystalline powders of $SnO_2$ synthesized by sol-gel method were screen printed with $Ag_2O$ and $PtO_x$ on alumina substrates. The fabricated sensors were tested against gases like $H_2$, $CH_4$, $C_3H_8$, $C_2H_5OH$ and $SO_2$. The composite material was found sensitive against $H_2$ at the working temperature $130^{\circ}C$, with minor interference of other gases. The $H_2$ gas as low as 100 ppm can be detected by the present fabricated sensors. It was found that the sensors based on $SnO_2-Ag_2O-PtO_x$ system exhibited the high performance, high selectivity and very short response time to $H_2$ at ppm level. These characteristics make the sensor to be a promising candidate for detecting low concentrations of $H_2$.

• New & Renewable Energy
• /
• v.3 no.4
• /
• pp.54-62
• /
• 2007

In this paper, we report the research highlight on the preparation and characterization of Indium-free $Cu_2ZnSnSe_4$ and Indium-reduced $CulnZnSe_2$ thin films in order to seek the viability of these absorber materials to be applied in thin film solar cells. The films of $Cu_2ZnSnSe_4\;and\;CulnZnSe_2$ were prepared using mixed binary chalcogenides powders. It was observed that Cu concentration was a function of substrate temperature as well as CuSe mole ratio in the target. Under an optimized condition, $Cu_2ZnSnSe_4\;and\;CulnZnSe_2$ thin films grew with strong [112]. [220/204] and [312/116] reflections. Both $Cu_2ZnSnSe_4\;and\;CulnZnSe_2$ films were found to exhibit a high absorption coefficient of $104^4cm^{-1}\;Cu_2ZnSnSe_4$ film showed a band gap of 1.5eV which closes to the optimum band gap of an ideal solar absorber for a solar cell. On the other side, an increase of optical band gap from 1.0 to 1.25eV was found to be proportional with an increase of Zn concentration in the $CulnZnSe_2$ film. All films in this study revealed a p-type semiconductor characteristic.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.246-249
• /
• 2000

The effects of Zr on the mechanical workability and tensile strength of Cu-Ni-Mn-Sn-Al alloys have been investigated and the following results were obtained. The mechanical workability of Cu-Ni-Mn-Sn-Al alloys are increased with addition of Zr. And the surface cracks of specimen were not produced in Zr added Alloys. Especially in condition of hot-worked beyond the 90% working ratio, Zr contained specimen showed intra-granule crack propagation but Zr-free specimen showed inter-granule mode. The tensile strength have maximum value in 0.05% Zr contained alloy. The aging mechanism of Cu-Ni-Mn-Sn-Al alloys were varied by Zr addition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.124-124
• /
• 2010

Currently, extreme ultraviolet lithography (EUVL) is being investigated for next generation lithography. EUVL is one of competitive lithographic technologies for sub-22nm fabrication of nano-scale Si devices that can possibly replace the conventional photolithography used to make today's microcircuits. Among the core EUVL technologies, mask fabrication is of considerable importance due to the use of new reflective optics having a completely different configuration compared to those of conventional photolithography. Therefore, new materials and new mask fabrication process are required for high performance EUVL mask fabrication. This study investigated the etching properties of SnO2 (Tin Oxide) as a new absorber material for EUVL binary mask. The EUVL mask structure used for etching is SnO2 (absorber layer) / Ru (capping / etch stop layer) / Mo-Si multilayer (reflective layer) / Si (substrate). Since the Ru etch stop layer should not be etched, infinitely high selectivity of SnO2 layer to Ru ESL is required. To obtain infinitely high etch selectivity and very low LER (line edge roughness) values, etch parameters of gas flow ratio, top electrode power, dc self - bias voltage (Vdc), and etch time were varied in inductively coupled Cl2/Ar plasmas. For certain process window, infinitely high etch selectivity of SnO2 to Ru ESL could be obtained by optimizing the process parameters. Etch characteristics were measured by on scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses. Detailed mechanisms for ultra-high etch selectivity will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.233-233
• /
• 2014

InGaZnO 박막트랜지스터(TFT)는 기존의 널리 사용되던 비정질 실리콘보다 높은 전하이동도와 Ion/off, 우수한 균일성과 신뢰성의 장점으로 최근 AMOLED양산에 적용되기 시작 하였다. 그러나 60인치 이상의 대면적 디스플레이와 초고해상도의 성능을 동시에 만족하기 위해 10 cm2/Vs정도의 전하이동도를 가지는 InGaZnO로는 한계가 있어 30 cm2/Vs 이상의 전하이동도를 가지는 물질의 연구가 필요하다. 연구에서는 높은 전하이동도를 만족하기 위해 InO2를, 우수한 신뢰성을 가지는 SnO2를 포함하는 InZnSnO로 실험을 진행하였다. 스퍼터링 시스템에서 ITO 타겟과 ZTO 타겟을 사용하여 동시증착법으로 채널을 증착하였고, 산소 분압 변화시에 IZTO TFT 소자 특성의 의존성을 평가하였다. Ar : O2=10 : 0 일 때와 Ar : O2=7 : 3 일 때의 이동도가 각각 12.6cm2/Vs, 19.7cm2/Vs로 산소 비율이 증가함에 따라 전하이동도가 증가하였다. 기존 IGZO 산화물 반도체에서는 산소 비율이 증가하면 산소공공(VO) 농도감소로 인해 전하이동도가 감소한다. 이는 전하농도가 증가하면 전하이동도가 증가하는 percolation 전도기구로 이해할 수 있다. 그러나 본 IZTO 물질에서는 산소비율 증가에 따라 오히려 전하이동도가 증가하였는데, 이는 IZTO 반도체에 함유된 Sn 이온의 가전자상태가 +2/+4가의 상대적 비율이 산소농도에 따라 의존하기 때문인 것으로 분석되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5928-5947
• /
• 2019

Multicast Mesh based Mobile Ad-hoc NETworks (MANETs) provide efficient data transmission in energy restraint areas without a fixed infrastructure. In this paper, the authors present an improved version of protocol SLIMMER developed by them earlier, and name it SLIMMER-SN. Most mesh-based protocols suffer from redundancy; however, the proposed protocol controls redundancy through the concept of forwarding nodes. The proposed protocol uses remaining energy of a node to decide its energy efficiency. For measuring stability, a new metric called Stability of Node (SN) has been introduced which depends on transmission range, node density and node velocity. For data transfer, a weighted cost function selects the most energy efficient nodes / most stable nodes or a weighted combination of both. This makes the node selection criteria more dynamic. The protocol works in two steps: (1) calculating SN and (2) using SN value in the weighted cost function for selection of nodes. The study compared the proposed protocol, with other mesh-based protocols PUMA and SLIMMER, based on packet delivery ratio (PDR), throughput, end-to-end delay and average energy consumption under different simulation conditions. Results clearly demonstrate that SLIMMER-SN outperformed both PUMA and SLIMMER.

• Korean Journal of Metals and Materials
• /
• v.46 no.7
• /
• pp.443-448
• /
• 2008

Contact materials are used in many electrical devices. Ag-Cd alloy has been widely used in electrical part, because Ag-Cd alloy has a good wear resistance and stable contact resistance. But nowadays Ag-Cd alloy isn't being used because of environmental challenges. Currently new research is being done on ($Ag-SnO_2$ and $Ag-SnO_2-In_2O_3$) as an alternative solution to fix any remainly environmental challenges. However $In_2O_3$ is more expensive and Ag-Sn alloy has low wear resistance. According to our research data Zn has a similar physical and chemical property. In this work, so we changed and optimized the Zn oxide to over 4 and added Sn oxide ratio 0.5, 1.0, 1.5wt%. Conclusions from the data recorded from the experiment of $Ag-ZnO-SnO_2$ are as follows.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.375-379
• /
• 2019

$ZnO-SnO_2(ZTO)$ was deposited by RF magnetron sputtering using a ceramic target whose Zn atomic ratio to Sn is 2:1 as a target, and the crystal structure variation with thermal treats was investigated. Transparent thin film transistors (TTFT) were fabricated using the ZTO films as active layers. About 100 nm-thick $Si_3N_4$ film grown on 100 nm-thick $SiO_2$ film was adopted as gate dielectrics. The mobility, threshold voltage, $I_{on}/I_{off}$, and interface trap density were obtained from the transfer characteristics of ZTO TTFTs. The effects of substrate temperature, and post-annealing on the property variation of ZTO TTFT were analyzed.

• Food Science of Animal Resources
• /
• v.41 no.1
• /
• pp.153-163
• /
• 2021

This study was conducted to examine the effects of starch noodles (dangmyeon; SNs) with different starch sources and porcine intestines (PIs) with different pH on the rehydration stability of Korean blood sausage (sundae). Mungbean SN3 and PI3 (pH 9.18) showed significantly higher values of 80.69%-91.67% and 79.66%-80.98%, respectively, regardless of the drying methods (hot air, vacuum and freeze drying) (p<0.05). A number of larger pores were observed only in the cross-section of the freeze dried SN and PI through SEM. SN2 (potato starch) and PI3 (pH 9.18) showed lower expansion (⁎ΔL 6.90 mm) and higher expansion ratio (⁎ΔL 26.29 mm), respectively, after rehydration of freeze dried sample (p<0.05). From the application of SN2 (potato starch) and PI (0.5%-2.0% Na-pyrophosphate) to freeze dried sundae manufacturing, higher rehydration stability of more than 91.5% was obtained. These results suggested that potato SN and treatment of PI with Na-pyrophosphate is useful for desirable rehydration stability of freeze dried sundae.