• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.847-849
• /
• 1992

Fluorine-doped ($SnO_2$:F) thin films obtained by pyrosol deposition method have been exposed to R.F. excited pure hydrogen plasma under the following conditions; substrate temperature of 200$^{\circ}C$, $H_2$ pressure of 1 Torr, R.F. input power of 50 mW/$\textrm{cm}^{2}$, $H_2$ flow rate of 30cc/min and exposure time of 15-600 seconds. It is found that the sheet resistance of the films remains unchanged or rather slightly reduces for initial exposure time of 30-60 seconds, but increases sharply with further increasing the exposure time. The optical transmittance of $SnO_2$:F films slows a rapid fall with increasing exposure time except for a film obtained with a solution having $CH_3OH/H_2O$ mol ratio of 2.65, its degradations at the exposure time of 30-60 seconds are about 7-15%. In addition, the exposure of the films to hydrogen plasma atmosphere leads to remarkable changes in the microstructure and chemical composition, which should be attributed to the reduction of $SnO_2$ to SnO and to elemental Sn.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.270-273
• /
• 2007

In this report, Indium-free and Indium-reduced thin film materials for solar absorber were studied in order to search alternative materials for thin film solar cell. The films of $Cu_2ZnSnSe_4$ and $Cu_2ZnSnSe_2$ were deposited using mixed binary chalcogenides powders. From the film bulk analysis result, it is observed that Cu concentration is a function of substrate temperature as well as CuSe mole ratio in the target. Under optimized conditions, $Cu_2ZnSnSe_4$ and $Cu_2ZnSnSe_2$ thin films grow with strong (112), (220/204) and (312/116) reflections. Films are found to exhibit a high absorption coefficient of $10^4$ $cm^{-1}$. $Cu_2ZnSnSe_4$ film shows a 1.5 eV band gap. On the other side, an increasing of optical band gap from 1.0 eV to 1.25 eV ($CuInSnSe_2$) is found to be proportional with an increasing of Zn concentration. All films have a p-type semiconductor characteristic with a carrier concentration in the order of $10^{14}$ $cm^{-3}$, a mobility about $10^1$ $cm^{2{\cdot}-1.}S^{-1}$ and a resistivity at the range of $10^2-10^6$ ${\Omega}{\cdot}m$.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권3호
• /
• pp.217-227
• /
• 1992

The purpose of this paper is to investigate changes in soft tissue in 22 patients treated by vertical ramus osteotomy and sagittal split ramus osteotomy for the correction of mandibular prognathism. 22 individuals, 12 males and 10 females, were selected from the patients with mandibular prognathism at the Department of Oral and Maxillofacial Surgery, Colledge of Dentistry, Kyung Hee University. Patient were analyzed with cephalogram taken 1 week before and at least 6 weeks after surgery under the same condition. Measurements were made constructed hard tissue and sop tissue points located on each before-and-after film tracing. Comparision were made of these figures to estimate the amount that the soft tissue followed the hard tissue structures in each surgical procedure : ratio of sop and hard tissue changes were formulated. The results were as follows. 1. The horizontal changes of Pogs and Bs as a ratio of the horizontal changes of Pog and B point were 1.02 and 1.16 respectively. 2. One millimeter of posterior changes at Pog resulted in 0.86mm of posterior change at Li and 0.09mm of posterior change at Ls. The greatest amount of sop tissue change occurred at Pogs, with substantially less posterior displacement at Bs, even less at Li and at least at Ls. 3. The ratio of LI to Li was 1:0.81 and the ratio of LI to Ls was not significant.(1 : 0.17) 4. The ULA(Cm-Sn-Ls) and the relative lower lip projection (LLP) was incnease4 but the relative upper lip projection (ULP) was slightly decreased 5. The angular change of the upper lip inclined angle (Ls-Sn/ANS-PNS) and lower lip inclined angle(Li-Pogs/Me-Go) expressed as a ratio of the posterior change of Pog were 0.57 and 0.20 respectively. 6. The ratio of the lower anterior facial height change of the soft tissue(Sn-Mes) to the hard tissue(ANS-Gn) were 0.78 and and the ratio of vertical height changes of the hard tissue and sop tissue to the posterior change of the Pog were 0.18 and 0.19 respectively. 7. The sop tissue angular change of facial convexity(G-Sn-Pogs) expressed as a ratio of the angular change of the hard tissue angle of facial convexity(N-A-Pog) was 1.24.

• 센서학회지
• /
• 제11권3호
• /
• pp.155-162
• /
• 2002

CO 기체 감지 특성을 향상시키기 위해서 3 mol% ZnO를 첨가한 $SnO_2$와 3mol% $SnO_2$를 첨가한 ZnO의 적층 형태를 변화시켜 연구하였다. 적층 구조는 단일층, 복층, 그리고 이종층 구조로 후막 인쇄법을 사용하여 제작하였다. $SnO_2$-ZnO계에서 제 2상은 발견되지 않았다. 전도성은 $SnO_2$에 ZnO를 첨가하면 감소하고, ZnO에 $SnO_2$를 첨가하면 증가하였다. 측정 온도증가와 CO 기체 유입으로 전도성은 증가하였다. 단층 및 복층의 후막센서 구조의 감도 향상은 없었으나, $SnO_2$ 3ZnO-ZnO $3SnO_2$/substrate 구조의 이종층 센서의 감도는 향상되었다. 센서 구조에 관계없이 I-V 변화는 모두 직선성을 나타내서 Ohmic 접합 특성을 이루고 있었다.

• 한국안광학회지
• /
• 제11권3호
• /
• pp.259-265
• /
• 2006

우리는 하이드로겔 렌즈의 단점을 보완하기 위해 AA(Acrylic acid) and BMA(butyl methacrylate)의 재료를 중합하였다. 실리콘의 합성과정은 다음과 같다. Disocynate를 HEMA(2-hydroxyethylmethacrylate)와 촉매 하에서 반응시킨 후 다시 고 산소 투과성 특성을 가지는 bis(hydroxyalkyl)terminated poly(dimethylsiloxane)를 반응시켜 Acrylate-PDMS(Polydimethylsiloxane)-Urethane prepolymer를 합성하였다. HEMA(2-hydroxyet-hylmethacrylate)는 중합 가능한 prepolymer를 만들기 위해서 사용하였으며, Urethane의 도입은 탄성이 좋고 산소투과성을 높이기 위해 사용하였다. 이렇게 만들어진 prepolymer를 기존 하이드로겔 콘택트렌즈의 재료들과 공중합하여 산소투과성이 좋은 실리콘 하이드로겔 렌즈(silicone hydrogel contact lens)를 제조하였다. 콘택트렌즈 제조를 위해 기존에 사용된 콘택트렌즈 재료에 탄성과 유연성이 좋은 BMA(Butyl methacrylate), 습윤성이 좋은 AA(Acrylic acid)를 첨가하였다. 개시제로는 AIBN(Azobis2-methylpropionitrile)을, 교차결합제로 EGDMA(Ethylene Glycol Dimethacrylat)를 사용하였다. 각 monomer의 특징에 따라 여러 가지 조합을 시도하여 기본적인 콘택트렌즈 물성을 만족하면서 동시에 산소투과성과 습윤성이 좋은 렌즈를 제조하였다. SILICONE, HEMA, NVP과 EGDMA등이 포함된 SN은 팽윤율(swelling ratio) 9.38%, 함수율(water content) 23.72%로 나타났고, 가시광선 투과율은 88%로 나타났다. AA를 첨가한 SA는 팽윤율(swelling ratio) 9.38%, 함수율(water content) 23.72%로 나타났고, 가시광선 투과율은 88%로 나타났다. SN에 BMA를 첨가한 SB는 팽윤율(swelling ratio) 12.50%, 함수율(water content) 18.56%로 나타났고, 가시광선 투과율은 88%로 나타났다. SN에 AA와 BMA를 첨가한 SAB는 팽윤율(swelling ratio) 8.33%, 함수율(water content) 12.93%로 나타났고, 가시광선 투과율은 88%로 나타났다.

• 대한치과교정학회지
• /
• 제29권4호
• /
• pp.503-510
• /
• 1999

이 연구의 목적은 II급 부정교합의 치료를 위해 경부견인 헤드기어(cervical pull headgear)를 사용할 때, 치료에 불리한 요인으로 작용한다고 언급되는 효과들이 실제로 발현되는지의 여부와 안모의 성장유형에 따라 그 차이가 존재하는 지를 알아 보고자 함에 있다. 이를 위해서 삼성서울병원 치과교정과에서 II급 부정교합으로 진단되어 경부견인 헤드기어로 치료받은 환자중, 성장기에 있으면서 비발치 치료를 받은 환자를 연구대상으로 선별하였다. 그리고 연구대상을 "후안면/전안면 고경비" 에 따라 수직성장군과 수평성장군으로 분류하였다. 수직성장군 15명(남자 5명, 여자 10명)과 수평성장군 11명(남자 4명, 여자 7명)의 치료전, 후의 두부방사선규격사진상에서 SN-PP angle, SN-GoGn angle, SN-MP angle, PFH/AFH ratio, SN to 6, PP to 6 등을 계측하고, 비교분석하여 다음의 결과를 얻었다. 1)수직성장군에서 구개평면이 전하방으로 경사되었다. 2)수평성장군에서 후안면/전안면 고경비가 증가하였다. 3)수직성장군과 수평성장군 모두에서 하악평면각은 변화하지 않았다. 4)상악대구치의 정출양에 있어서 수직성장군과 수평성장군의 차이는 없었다.

• 한국식품과학회지
• /
• 제43권6호
• /
• pp.689-695
• /
• 2011

모유대체지를 합성하기 위하여 palm stearin을 acetone fractionation으로 획득한 PPP rich fraction과 oleic ethyl ester를 기질로 사용하고, sn-1,3 위치 선택성을 가진 Lipozyme TLIM을 이용하여 에스테르 교환반응을 수행하였다. 반응 조건(반응 온도, 반응 시간, 기질의 비율)을 요인 변수로 하여 중심 합성 계획에 의한 반응표면분석을 이용하였고, 비 용매 계에서의 반응을 통해 sn-2 위치에 팔미트산의 함량이 높고, sn-1,3에 올레산의 함량이 높은 1,3-dioleoyl-2-palmitoyl glycerol(OPO) 합성 조건을 최적화 하였다. 모델에 의하여 구해진 최적화 조건은 반응온도=$55^{\circ}C$, 반응시간 =3시간, 기질비율=1:6이었고 이때 sn-2 위치의 팔미트산($Y_1$, %)의 함량은 70.70%이었고 sn-1,3 위치의 올레산($Y_2$, %) 함량은 69.58% 이었다. 최적조건에서 합성된 모유대체지를 silver ion HPLC분석 결과 SSS(5.22%), SSU(36.28%), SUU(12.94%), USU(31.24%), UUU(11.04%)로 나타났다. 한편, TAG(90.35 g/100 g), 1,3-DAG (5.66 g/100 g)와 1,2-DAG(4.00 g/100 g)로 구성되어 있었고, 1,3-DAG 가 1,2-DAG 보다 많이 생성되는 것으로 나타났다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.556-567
• /
• 1998

Robust design in industry is an approach to reducing performance variation of quality characteristic value in products and processes. Taguchi has used the signal-to-noise ratio(SN) to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. Taguchi has dealt with having constraints on both the mean and variability of a characteristic (the dual response problem) by combining information on both mean and variability into an SN. Many Statisticians criticize the Taguchi techniques of analysis, particularly those based on the SN. In this paper we propose a substantially simpler optimization procedure for robust design to solve the dual response problems without resorting to SN. Two examples illustrate this procedure. in the two different experimental design(product array, combined array) approaches.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.122-127
• /
• 2016

Tin oxide ($SnO_2$) nanoparticles have been synthesized by solution combustion method using citric acid as a fuel. The oxide to fuel ratio has been varied to obtain ultrafine nanoparticles with better surface area; such particles will be useful in many applications. With this synthesis method, spherical particles are formed having a particle size in the range of 11-30 nm and BET surface area of ~ $24m^2/g$. The degree of agglomeration of $SnO_2$ nanoparticles has been calculated.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.210-211
• /
• 2006

A series of L-LA polymerizations initiated by $Sn(Oct)_{2}\;([LA]_{0}/[Sn]_{0}=200)$ were carried out in scR22 at $130^{\circ}C$ and 300 bar, where $[LA]_{0}$ is the initial L-lactide concentration and $[Sn]_{0}$ is the initial $Sn(Oct)_{2}$ concentration. The reaction time dependences of monomer conversion and PLLA MW improved. The monomer conversion and PLLA MW increased with increasing reaction time. The effect of temperature on monomer conversion and PLLA MW was investigated in a series of polymerizations conducted at temperatures ranging from 90 to $150^{\circ}C$ and at a constant pressure of 200 bar. In all of these experiments, the ratio of monomer to R22 concentration was held constant at 12.4 wt.-%. Increasing the reaction temperature from 90 to $130^{\circ}C$ resulted in increased monomer conversion from 11.5 to 72.2 %.