• 한국정보전자통신기술학회논문지
• /
• 제2권1호
• /
• pp.11-15
• /
• 2009

본 연구에서 전원이 공급되는 의료기기들에서 공통적으로 사용되며, 성능, 안전성과 신뢰성 측면에서 기존 전원모듈보다 우수한 250 W SMPS방식을 적용한 의료용 전원모듈의 개발하였다. SMPS의 특성상 AC전원의 50 ~ 60 Hz 라인 주파수를 DC로 변환하는 회로의 설계와 높은 주파수로 변경하기 위한 전자회로로 구성하였고, 완전한 방사노이즈 흡수회로를 구성하여 의료기기 오동작을 방지하기 하도록 설계하였다. SMPS 전원모듈은 의료기기뿐만 아니라 PC, 가정용 기기 및 전자 교환기 등의 제품에도 확대 적용이 가능하다.

• Journal of Electrical Engineering and Technology
• /
• 제5권3호
• /
• pp.468-476
• /
• 2010

This paper presents a direct single-stage power converter using single-phase isolated full-bridge converter modules, with inherent power factor correction (PFC) for a 12 kW switched mode power supply (SMPS). The advantages of the proposed converter are its simple control strategy, reduction in number of conversion stage, low input line current harmonics, and improvement in power factor. Analysis of the single-stage converter is carried out in continuous conduction mode of operation. Steady-state analysis of the proposed converter is conducted to obtain converter parameters. A systematic design procedure is also presented for a 12k W converter with a design example. The effect of load variation on SMPS is also studied in order to demonstrate the effectiveness of the proposed converter for the complete range of load conditions. A set of power quality indices on input ac mains for an SMPS fed from a single-stage converter is also presented for easy comparison of their performance.

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.137-142
• /
• 2023

SMPS(Switched Mode Power Supply, 전력공급장치) 회로설계 시 특별한 고찰 없이 지나치기 쉬운 부분이 스너버(snubber) 회로이다. 그러나 스너버(snubber) 회로에 따른 SMPS의 성능저하 및 SET 전체에 미치는 영향은 결코 무시할 수 없다. 또한 스위칭시 피크치 전압과 전류로부터 소자를 보호하고 on/off 스위칭시 손실을 줄여주기 위하여 스위치 양단에 스너버(snubber) 회로를 부가해준다. 따라서 본 논문에서는 스너버(snubber) 회로에 대한 충분한 이해를 위해 이론적 해석 및 실제 회로설계 때 설계자가 응용할 수 있는 실험식을 정리하여, 스너버(snubber) 회로의 최적화를 도모하고자 한다.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.85-92
• /
• 2018

본 논문에서는 $-40^{\circ}C$에서 동작하는 150W급 LED조명용 전원공급장치(SMPS) 회로를 설계하였다. SMPS의 특성 해석을 위해서 150W급 LED 조명 구동 정전류 회로를 설계하고 시제품의 제작 및 성능을 측정하였다. 150W급 LED조명용 SMPS 회로의 동작온도범위는 $-40{\sim}70^{\circ}C$이며, SMPS 예측 수명은 24시간 기준으로 1.29~2.25년으로 예측되었다. 초가속수명시험 및 EMI 전도 시험을 통해 이상이 없음을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.204-209
• /
• 2002

A PDP(Plasma Display Panel) module consists of a discharge panel, a SMPS(Switched Mode Power Supply) for power supply, driving boards for panel control, and a logic board. Driving boards supply high voltage pulses to induce glow discharge in the PDP panel. The electrical pulses excite the circuit elements and subsequently generate acoustic noises. The main sources of the noise in the circuit are the transformer of SMPS and the power MOSFET(Metal Oxide Semiconductor Field Effect Transistor) of driving boards, and the heat sinks often amplify the noise level. The reduction of the acoustic noises was achieved by modifying both the structural and circuit elements. The structural method was executed by the improvement of heat sinks. The optimization of SMPS and condensers was carried out for the circuit elements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.913-914
• /
• 2006

In industrial field, electric fork-lift has been mainly powered by batteries which are varied from DC 36V to 80V. Operating electric fork-lift truck depends on stable electric power supplies which are ensured by using Switched Mode Power Supply (SMPS). This paper presents design of SMPS for stable electric power supply. The SMPS has much strength such as high effectiveness, low cost and high stability of output voltage. At the same time, SMPS is small and multi output and has simple design of circuit.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.667-672
• /
• 2010

A way how to teach a general understanding of switched mode power supplies (SMPS) is shown. A fourth order PWM DC-to-DC converter with limited duty cycle range is treated as an example and a survey over important data (maximum voltage and current ratings for the elements, rms- values for the semiconductor devices and a rough approximation of the losses) of the circuit is given. Furthermore, a converter model based on duty ratio averaging is established. Continuous mode of operation is used. The results make it possible to estimate the applicability of the given converter structure and offer sufficient material for the calculation, design, and analysis and give a better insight into switched mode energy conversion.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.47-52
• /
• 2020

With the 4th industrial revolution, condition monitoring using machine learning techniques has become popular among researchers. An overload due to complex operations causes several irregularities in MOSFETs. This study investigated the acquired voltage to analyze the overcurrent effects on MOSFETs using a failure mode effect analysis (FMEA). The results indicated that the voltage pattern changes greatly when the current is beyond the threshold value. Several features were extracted from the collected voltage signals that indicate the health state of a switched-mode power supply (SMPS). Then, the data were reduced to a smaller sample space by using a principal component analysis (PCA). A robust machine learning algorithm, the support vector machine (SVM), was used to classify different health states of an SMPS, and the classification results are presented for different parameters. An SVM approach assisted by a PCA algorithm provides a strong fault diagnosis framework for an SMPS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.609-612
• /
• 1996

This paper describes a design and implementation of the practical SMPS(Switched Mode Power Supply) with multi-output independent regulation scheme. The designed SMPS is applied to the PSU(Power Supply Unit) of high power GTO drivers for a inverter system. In order to accomplish precise voltage regulations for both turn-on and turn-off bias voltages of the GTO driver, the conventional forward type PWM converter scheme is adopted with the Post Regulator using a Saturable Reactor. Analytic design criteria and control schemes are described for practical applications. Finally, the precise regulation of multi-output voltages is proved by experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1214-1216
• /
• 2004

Conventional Switched Mode Power Supplies(SMPS) with diode-capacitor rectifier have distorted input current waveform with high harmonic contents. Typically, these SMPS have a power factor lower than 0,65. To improve with this problem the power factor correction(PFC) circuit of power supplies has to be introduced. PFC circuit have tendency to be applied in new power supply designs. The input active power factor correction circuits can be implemented using either the two-stage or the single-stage approach. In this paper, the comparative analysis of power factor correction circuit using feedforward control with average current mode single-stage flyback method converter and two-stage converter which is combination of boost and flyback converter. The two prototypes of 50W were designed and tested a laboratory experimental. Also, the comparative analysis is confirmed by simulation and experimental results.