• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1174-1176
• /
• 1997

In this paper, the power system stabilizer(PSS) using the sliding mode observer-model following(SMO-MF) including closed-loop feedback(CLF) for single machine system is extended to multimachine system.

• 수산해양교육연구
• /
• 제29권3호
• /
• pp.778-784
• /
• 2017

This paper proposes a sensorless speed control of a permanent magnet synchronous motor (PMSM) based on an adaptive sliding mode observer (SMO) for electric propulsion system of small ships. An adaptive observer gain is proposed based on the Lyapunov's stability criterion to reduce the chattering problem at any speed operation instead of the constant gain observer. Furthermore, a cascade low-pass filter with variable cut-off frequency is suggested to strengthen the filtering capability of the observer. The experimental results from a 1.5 kW PMSM drive are provided to verify the effectiveness of the proposed adaptive SMO. The result shows that the proposed method gives good speed control performances even when the PMSM operates at 0.5% from its rated speed value.

• 전력전자학회논문지
• /
• 제16권1호
• /
• pp.38-43
• /
• 2011

본 논문에서는 슬라이딩 모드 관측기를 이용하여 IPMSM(Interior Permanent Magnet Synchronous Motor)의 센서리스 제어의 기동특성에 관한 연구를 수행하였다. 역기전력을 추정하는 센서리스 제어 방식은 초기 구동 시 회전자의 위치를 알 수가 없으므로 Open-Loop알고리즘을 이용하여 강제로 모터를 구동시킨다. 이 방법은 Open-Loop에서 Closed-Loop로 제어되는 시점에 부하의 상태에 따라 기동 특성이 변하는 문제점이 발생 할 수 있다. 본 논문에서는 부하에 따라 기동 특성에서 야기되는 문제점을 검토하고 그 해결책을 제시한다. 제시된 방법은 6극 600W급 IPMSM을 이용하여 시뮬레이션과 실험을 통해 검증한다.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.753-762
• /
• 2015

This paper presents a nonlinear sliding mode control (SMC) scheme with a variable damping ratio for interior permanent magnet synchronous motors (IPMSMs). First, a nonlinear sliding surface whose parameters change continuously with time is designed. Actually, the proposed SMC has the ability to reduce the settling time without an overshoot by giving a low damping ratio at the initial time and a high damping ratio as the output reaches the desired setpoint. At the same time, it enables a fast convergence in finite time and eliminates the singularity problem with the upper bound of an uncertain term, which cannot be measured in practice, by using a simple adaptation law. To improve the efficiency of a system in the constant torque region, the control system incorporates the maximum torque per ampere (MTPA) algorithm. The stability of the nonlinear sliding surface is guaranteed by Lyapunov stability theory. Moreover, a simple sliding mode observer is used to estimate the load torque and system uncertainties. The effectiveness of the proposed nonlinear SMC scheme is verified using comparative experimental results of the linear SMC scheme when the speed reference and load torque change under system uncertainties. From these experimental results, the proposed nonlinear SMC method reveals a faster transient response, smaller steady-state speed error, and less sensitivity to system uncertainties than the linear SMC method.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1154-1164
• /
• 2015

This paper proposes a fully sensorless driver for a permanent magnet synchronous motor (PMSM) integrated with a digital motor controller and an analog pre-driver, including sensing circuits and estimators. In the motor controller, a position estimator estimates the back electromotive force and rotor position using a sliding-mode observer. In the pre-driver, drivers for the power devices are designed with a level shifter and isolation technique. In addition, a current sensing circuit measures a three-phase current. All of these circuits are integrated in a single chip such that the driver achieves control of the speed with high accuracy. Using an IC fabricated using a $0.18{\mu}m$ BCDMOS process, the performance was verified experimentally. The driver showed stable operation in spite of the variation in speed and load, a similar efficiency near 1% compared to a commercial driver, a low speed error of about 0.1%, and therefore good performance for the PMSM drive.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.73-78
• /
• 2012

This paper investigates the restart performance of sensorlessly controlled IPMSM Fan motor free-running in middle or high speed range just after inverter power off. There could be some difficulties to extract exact position information by using conventional sensorless control for restarting the motor because of stopped inverter operation. To solve this problem, we proposes to use low cost hall sensor. Using a hall sensor with SMO (Sliding Mode Observer) give us a solution to facilitate rotor position information extraction. The algorithm in this paper shows a certain way of the restarting method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.75-76
• /
• 2012

본 논문에서는 고속 운전을 위하여 IPMSM(Interior Permanent Magnet Synchronous Motor)의 약계자 운전을 제시한다. IPMSM 운전을 위한 약계자 제어기는 SMO(Sliding Mode Observer)를 통한 추정 속도와 실제 전동기의 속도를 비교하여 나타나는 오차값을 피드백 받아서 이용한다. 기본적으로 속도 오차가 없는 상황에서는 MTPA(Maximum Torque Per Amp.)에서 동작 시키고 속도 오차가 증가하면 이 오차에 대해 d축 전류를 음의 방향으로 증가시켜 약계자 제어를 한다. 본 논문에서는 제시한 약계자 운전으로 IPMSM에 적용시험을 한다. 그리고 시험결과를 분석하여 본 논문의 타당성을 입증한다.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.169-176
• /
• 2000

Longitudinal and lateral forces acting on tires are known to be closely related to the tract-ability braking characteristics handling stability and maneuverability of ground vehicles. In thie paper in order to develop tire force monitoring systems a monitoring model is proposed utilizing not only the vehicle dynamics but also the roll motion. Based on the monitoring model three monitoring systems are developed to estimate the tire force acting on each tire. Two monitoring systems are designed utilizing the conventional estimation techniques such as SMO(Sliding Mode Observer) and EKF(Extended Kalman Filter). An additional monitoring system is designed based on a new SKFMEC(Scaled Kalman Filter with Model Error Compensator) technique which is developed to improve the performance of EKF method. Tire force estimation performance of the three monitoring systems is compared in the Matlab simulations where true tire force data is generated from a 14 DOF vehicle model with the combined-slip Magic Formula tire model. The built in our Lab. simulation results show that the SKFMEC method gives the best performance when the driving and road conditions are perturbed.