• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.45-46
• /
• 2018

The fire at the pilotis parking lot shows the fire propagation paths that are propagated to the ceiling materials and insulation materials and propagated through the external walls. In addition, there is a high risk of fire caused by vehicles with high combustion loads spreading throughout the parking lot. In particular, the omission of the ceiling materials at the parking lot in recent fire cases has contributed to the spread of the fire. In this study, the combustion performance of the ceiling materials between the insulation material and the vehicle is considered to prevent fire from spreading. Based on field research, the type of ceiling material used in the piloti structure showed that SMC ceiling materials have the highest percentage. Combustion performance test (KS F ISO 5660-1) was carried out on the SMC ceiling materials and the AL ceiling materials to review the fire safety of the ceiling finish based on the field investigation. The results of the test showed that the SMC ceiling materials has a THR 28.973[MJ/㎡] and peek HRR 273.93 [kW/㎡], while the AL ceiling material has a THR 0.584[MJ/㎡] and peek HRR 15.215[kW/㎡].

• 소성∙가공
• /
• 제4권1호
• /
• pp.39-47
• /
• 1995

The compression molding of SMC (sheet molding compund) at room temperature was analyzed based on rigid-viscoplastic approach by three dimensional finite element program. The developed program was tested by solving the three dimensional compression of wedge type specimens of aluminum alloys at various processing conditions. The simulation results were compared well to the experimental results available in the literature. based on this comparison the program was proved to be valid and was further applied in solving compression molding of SMC, which is a thermosetting material reinforced with chopped fiber glass. To investigate the effects of friction conditions and mold closing speeds for compression molding of SMC charge at room temperature, compressions of the cylindrical and rectangular shaped SMC were analyzed for various friction conditions and mold closing speeds. The calculated load values were compared to the experimental results for the compression molding of cylindrical specimen.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.796-797
• /
• 2006

SMC(Soft Magnetic Composite) materials which we have newly developed were studied for their applying effects. It shows almost the same motor output power as the laminated Si-steels of 0.35mm in thickness, although core loss of SMC is about 1.5 times that of the laminations. As shown in the results, the SMC motor core is sufficient for real use as a motor core. Furthermore, a 3-D shaped motor core made of SMC can improve approximately 20% of the output compared with the same size motor made of laminations.

• 한국전자통신학회논문지
• /
• 제16권3호
• /
• pp.471-476
• /
• 2021

분말 야금 기술에 의한 복합 연자성 재료는 전기기기에 일반적으로 사용되는 종래의 전기강판보다 많은 장점을 가지고 있으며, 그 관련 기술은 최근에 상당한 발전을 거듭하고 있다. 복합 연자성 재료는 일반적으로 분말의 형태로 인해 자기적 등방성 가지므로 3차원 자속 및 복잡한 구조의 전기기기 구성에 적합하다. 하지만 SMC와 같이 등방성 자기 특성을 가지는 재료는 복잡한 벡터 히스테리시스를 가지므로 정확한 손실 특성을 예측하는 것이 매우 어렵다. 따라서 본 논문에서는 전기강판 및 SMC의 링 타입 시편을 제작하고 시편 크기에 따라 자기적 특성을 측정한 후, 측정된 자기적 정보를 이용하여 800Hz 이상에서 구동하는 고속 영구자석 전동기의 전자계 해석을 수행하였다. 또한, 해당 모델의 시작품을 제작하고 효율 측정 및 비교를 통해 본 논문의 신뢰성을 입증하였다.

• Composites Research
• /
• 제31권1호
• /
• pp.8-11
• /
• 2018

섬유강화 복합재료 제조 방법 중 sheet molding compound(SMC)는 자동차에 적용 가능성이 가장 높은 소재이다. 본 연구에서는 저비중 필러인 유리버블과 강화재인 유리섬유를 사용하여 물성이 저하되지 않으면서 낮은 비중을 나타내는 SMC의 제조를 위한 최적의 배합비에 대해 연구하였다. SMC 내부에 유리섬유의 혼입양이 증가할수록 강도가 향상하였고, 유리버블의 혼입양이 증가할수록 비중이 낮아졌다. 최적의 배합에서는 비중이 낮아지면서 물성이 향상되는 시너지 효과가 나타남을 발견하였다. 이러한 시너지 효과는 유리버블의 크랙 전파의 분산효과와 유리버블의 혼입에 따른 섬유와 매트릭스의 결합력의 향상에 기인한 것임을 내부구조 분석을 통해 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.129-129
• /
• 2003

최근에 능동 영역 액정 표시 소자(Active Matrix Liquid Crystal Display, AMLCD)에서 고해상도와 빠른 응답속도를 요구하게 되면서부터 다결정 실리콘(poly-Si) 박막 트랜지스터(Thin Film Transistor, TFT)가 쓰이게 되었다. 그리고 일반적으로 디스플레이의 기판을 상대적으로 저가의 유리를 사용하기 때문에 저온 공정이 필수적이다. 따라서 새로운 저온 결정화 방법과 부가적으로 최근 디스플레이 개발 동향 중 하나인 대화면에 적용 가능한 공정인 금속유도 결정화 (Silicide Mediated Crystallization, SMC)가 연구되고 있다. 이 소자는 top-gated coplanar구조로 설계되었다. (그림 1)(100) 실리콘 웨이퍼위에 3000$\AA$의 열산화막을 올리고, LPCVD로 55$0^{\circ}C$에서 비정질 실리콘(a-Si:H) 박막을 550$\AA$ 증착 시켰다. 그리고 시편은 SMC 방법으로 결정화 시켜 TEM(Transmission Electron Microscopy)으로 SMC 다결정 실리콘을 분석하였다. 그 위에 TFT의 게이트 산화막을 열산화막 만큼 우수한 TEOS(Tetraethoxysilane)소스로 사용하여 실리콘 산화막을 1000$\AA$ 형성하였고 게이트는 3000$\AA$ 두께로 몰리브덴을 스퍼터링을 통하여 형성하였다. 이 다결정 실리콘은 3$\times$10^15 cm^-2의 보론(B)을 도핑시켰다. 채널, 소스, 드래인을 정의하기 위해 플라즈마 식각이 이루어 졌으며, 실리콘 산화막과 실리콘 질화막으로 passivation하고, 알루미늄으로 전극을 형성하였다 그리고 마지막에 TFT의 출력특성과 전이특성을 측정함으로써 threshold voltage, the subthreshold slope 와 the field effect mobility를 계산하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.161-163
• /
• 2011

Due to various kind of waterproof materials and methods, which is difficult to select the most appropriate to waterworks. The materials used to prevent the deterioration of the service life is short, because of the chemical erosion. So, in the 2010 Office of Waterworks Seoul Metropolitan Government has set new standards. Recently, SMC panel is a trend that is being applied to water treatment facilities. However, SMC panel has not yet implemented a performance evaluation. Therefore, this study to confirm that satisfaction for the Office of Waterworks Seoul Metropolitan Government of the performance requirements, when the applied the SMC panel to water treatment structure.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권21호
• /
• pp.9459-9465
• /
• 2014

Background: Structural maintenance of chromosomes 4 (SMC-4) is a chromosomal ATPase which plays an important role in regulate chromosome assembly and segregation. However, the role of SMC-4 in the incidence of malignancies, especially colorectal cancer is still poorly understood. Materials and Methods: We here used quantitative PCR and Western blot analysis to examine SMC-4 mRNA and protein levels in primary colorectal cancer and paired normal colonic mucosa. SMC-4 clinicopathological significance was assessed by immunohistochemical staining in a tissue microarray (TMA) in which 118 cases of primary colorectal cancer were paired with noncancerous tissue. The biological function of SMC-4 knockdown was measured by CCK8 and plate colony formation assays. Fluorescence detection has been used to detect cell cycling and apoptosis. Results: SMC-4 expression was significantly higher in colorectal cancer and associated with T stage, N stage, AJCC stage and differentiation. Knockdown of SMC-4 expression significantly suppressed the proliferation of cancer cells and degraded its malignant degree. Conclusions: Our clinical and experimental data suggest that SMC-4 may contribute to the progression of colorectal carcinogenesis. Our study provides a new therapeutic target for colorectal cancer treatment.

• 소성∙가공
• /
• 제14권3호
• /
• pp.263-268
• /
• 2005

Heating channel layout design and evaluation technology for SMC molding system was investigated in this work. Traditional rules of cooling channel design in injection molding were applied to the present work. Finite element thermal analysis with $ANSYS^{TM}$ was performed to evaluate the temperature distribution of SHC mold surface. SMC mold was manufactured to evaluate the effect of a proposed heating channel layout system on the temperature distribution of SMC mold surface and infrared camera was applied to a measurement of temperature distribution. It was shown that infrared camera application was possible in a measurement of temperature distribution on SHC mold surface.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1175-1176
• /
• 2006

Influences of machining on magnetic properties of soft magnetic composites (SMC's) with addition of two kinds of binder, i.e., organic binder and inorganic one, were investigated. Machining does not affect DC magnetic properties of the SMC compacts. This can be ascribed to their particular structure in which the ironpowder particles are highly isolated by the binder. On the other hand, decrease in resistivity and resultant increase in eddy current loss was confirmed in the machined compacts containing inorganic binder. It is supposed that the brittleadditive binder existing between the iron particles is partly broken, and iron-to-iron contact is formed on the machined surface.