• Tribology and Lubricants
• /
• v.22 no.2
• /
• pp.73-78
• /
• 2006

The surface modification of automobile parts is of great technological importance for the improvement of corrosion resistance, wear resistance, fatigue strength and so on. Recently, research on the development of the technology of surface modification substituting 6-balance chrome process has progressively been achieved in automobile parts. Although the innovation technology for the improvement of the corrosion-resisting and wear resistant properties through post oxidation after nitrocarburising process had attracted a great attention. For this, anodically potentiodynamic polarisation testing was carried out to corrosion resistance and friction and wear experiment according to applied load and sliding distance was carried out to evaluate the wear resistance of machine structural steel with nitrocarburising and non-nitrocarburising SM45C. The presumed wear volume was calculated with the image processing far evaluation of wear resistance of two materials. The results show that the nitrocarburising had a distinguished corrosion resistance and wear resistance than non-nitrocarburising.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.219-223
• /
• 2011

The characteristics of SOx emission were investigated using SM (India) coal and Berau, C&A (Austria) coal. Experiments were performed in two different ways. In the first type of experiment, the temperature in the furnace was increased and the, samples were combusted at the ignition temperature after filling the furnace with coal. The second experimental method was to add the coal to after maintaining a constant temperature. The results demonstrated that SOx emission from coal combustion depended upon the sulfur content. In the case of Berau coal and C&A coal, an enhancement of combustibility which was accomplished by increasing the combustion temperature, an increase in airflow and decrease in particle size of coals tended to increase $SO_2$ generation. Conversely, in the case of SM coal, the concentration of $SO_2$ tended to decrease, because the high contents of $Fe_2O_3$ in the ashes increased the oxidation power of coal itself, which oxidized $SO_2$ into $SO_3$. In the case of C&A coal, the $SO_2$ peak was only observed twice. This was thought to be caused by the thermal transfer rate from the surface to the interior of the coal.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.130-130
• /
• 1995

AM, SM 및 ASA는 수용액중에서 겉보기 1차반응에 따라 분해되었으며 보존온도가 높을수록 분해가 촉진되는 온도 의존성을 나타내었다. AM의 분해경로는 pH 1.22 및 pH 7.0 이상에서는 AM$\longrightarrow$ SM $\longrightarrow$ SA의 경로로 주로 분해되었으며 pH 2.01 - 6.08의 범위에서는 AM $\longrightarrow$ASA$\longrightarrow$SA의 경로로 분해되는 양상을 보였다. 또 pH가 분해에 미치는 영향을 pH-rate profile로 나타낸 결과 AM, SM 및 ASA의 최대안정 pH는 각각 4.0, 3.0, 2.0 부근이 있고 이 조건에서의 분해 반감기는 114, 168, 113 hr로 나타났다. 전체적으로 보면 pH 2.0 이하에서는 ASA가 AM 보다 약간 안정한 편이나 pH 2.0-8.0 사이에서는 AM의 분해속도가 ASA보다 현저히 낮았다. 또 AM은 pH 7.0 이상에서, SM은 pH 6.0 이상에서, ASA는 9.0 이상에서 특수염기촉매반응에 따라 분해가 이루어지는 것을 알 수 있었다. 이온강도($\mu$)의 영향으로는 pH 7.0에서 이온강도가 0.115에서 1.0으로 증가할수록 $\mu$$^{1}$2/에 대해 AM의 분해속도정수가 직선적으로 완만하게 감소되었다. 또 완충수용액 중 AM의 가수분해 억제효과를 검토하기 위해 시클로덱스트린류를 첨가하였을 때, $\beta$-시클로덱스트린과 히드록시프로필기-$\beta$-시클로덱스트린은 AM의 분해를 각각 1.6배 및 1.1배 촉진시켜 촉매적으로 작용하였으며 디메칠-$\beta$-시클로덱스트린은 약 3.2배 분해속도를 억제시켜 안정화제로 작용하였다.Zn^{2+}$, soybean trypsin inhibtor에 의해 25～50% 정도, serine proteinase inhibitor인 phenylmethylsulfonyl floride에 의해 80%정도 활성이 억제되는 특성이 있음을 규명하였다.면역환성 (immunoreactivity)이 나타났고 pyramidal cell layer (PCL)와 glia에 SOD-1이 강하게 염색되었다. APT 병용 투여로 상당수의 경련이 일어나지 않은 흰쥐는 해마의 DG에 FRA가 경미하게 염색되었고, PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에 공해이온으로 존재할 경우 흡착에 의한 제거가 가능하다. 한편 이같

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.4
• /
• pp.285-296
• /
• 2017

This paper proposes an improved modulation scheme for the medium voltage modular multi-level converter (MMC), which operates in the nearest level control and applies in the medium voltage direct current (MVDC) system. In the proposed modulation scheme, the offset (neutral-to-zero output) voltage is adjusted, with the phase voltage magnitude, thereby maintaining a constant value with N+1 level in the controllable modulation index (MI) range. In order to confirm the proposed scheme's validity, computer simulations for the 22.9 kV - 25 MVA MMC were performed with PSCAD/EMTDC, as well as hardware experiments for the 380 V - 10 kVA MMC. The proposed modulation scheme offers to build a constant pole voltage regardless of the MI value, and to build a phase voltage with improved total harmonic distortion (THD).

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.4
• /
• pp.464-469
• /
• 2000

Experiments were conducted to determine the effects of soybean meal (SBM) as a source of protein and sago meal (SM) as a source of carbohydrate on in situ and in vivo digestibility of dietary components in four male goats (Kambing Katjang) and four male sheep (Malin) weighing 25-35 kg. Rumen volume, as well as rumen fluid dilution rate were also determined. The animals were housed in single pens with individual feeding and drinking troughs and each animal was fitted with a rumen fistula. They were fed two diets : chopped rice straw+200 g soybean meal (SBM), and chopped rice straw+190 g soybean meal+300 g sago meal (SBM+SM). Rice straw was offered ad libitum. The supplements were isonitrogenous (80 g crude protein/animal/d), but the proportions of dry matter (DM), organic matter (OM), crude fibre (CF), neutral detergent fibre (NDF) and acid detergent fibre (ADF) were lower in the SBM supplement (191, 165, 11, 40, 15 g/animal/d for DM, OM, CF, NDF and ADF, respectively) than in the SBM+SM supplement (445, 423, 25, 102, 38 g/animal/d for DM, OM, CF, NDF and ADF, respectively). Two animals from each species were fed either supplement in a cross-over design in two periods. Each period lasted for four weeks. In situ and in vivo digestibility studies were carried out, followed by the determination of rumen volume and rumen fluid dilution rate. The results showed that straw DM and total DM intakes of goats (average of $48.7g/kg\;W^{0.75}$, $72.7g/kg\;W^{0.75}$, respectively) were significantly (p<0.01) higher than sheep (average of $3.56g/kg\;W^{0.75}$, $61.6g/kg\;W^{0.75}$, respectively), but OM, N and GE intakes were not significantly different between the two animal species. When the effect of supplements was compared, animals fed SBM+SM supplement had significantly (p<0.001) higher DM, OM and GE intakes than animals fed SBM supplement. Potential degradabilities of rice straw DM were significantly (p<0.01) higher in goats (average of 48.8%) than in sheep (average of 46.1 %). The supplements had no significant effect on the potential degradabilities of DM, OM and NDF, but they had a significant (p<0.05) effect on the degradation rates of DM and NDF. The addition of sago meal in the diet reduced the degradation rates of DM and NDF of rice straw in the rumen. Potential degradability of DM of soybean meal was not significantly different between animal species as well as between supplements. Sago meal was highly degradable. At 24 h of incubation in the rumen, 90-95% of DM loss was observed. There was a significant interaction between animal species and supplements in the in vivo digestibility of ADF and GE. In animals fed SBM supplement, the in vivo digestibility of ADF was significantly (p<0.05) higher in goats ($50.6{\pm}4.22%$) than in sheep ($44.4{\pm}3.21%$), but digestibility of GE was significantly (p<0.05) higher in sheep ($70.2{\pm}1.93%$) than in goats ($63.0{\pm}3.07%$). The digestibility values of CP and OM were significantly (p<0.05) higher in sheep when compared to goats. Animals fed SBM+SM supplement showed significantly (p<0.05) higher DM and OM digestibility values than animals fed SBM supplement, but digestibility values of CP were significantly (p<0.05) higher in animals fed SBM supplement. Differences in in vivo digestibility values of CF and NDF were not significantly different between animal species or supplements. Water intake, rumen volume ($1/kg\;W^{0.75}$), rumen fluid dilution rate and mean retention time were similar between the two animal species. However, rumen fluid dilution rate and mean retention time was significantly (p<0.01) affected by supplements. Animals fed SBM+SM had faster rumen fluid dilution rate and consequently shorter mean retention time.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.162-170
• /
• 2018

To improve the productivity of Pleurotus ostreatus, different conditions of liquid spawn culture were tested. The optimum culture conditions were potato dextrose broth, incubation temperature of $22^{\circ}C$, and pH 6. Fifteen different media ('A' to 'O') containing 0.3% soybean meal (SM) were prepared by varying sugar and glucose contents. The cultures were propagated in SM media for 14 days, at $22^{\circ}C$, and pH 6. Their absorbances were higher after 14 days of incubation in the media containing both sugar and glucose. In particular, the absorbance of media containing 5 to 20% of glucose alone ('C', 'D', 'E', and 'F') tended to increase in the incubation period. Dry cell weight was lower in media containing less than 20% sugar or glucose alone than in media containing 30% sugar ('A') or 30% glucose ('B') alone. In sawdust media, in 900 mL-bottle, the optimum inoculation volume of liquid spawn was 15 to 20 mL. The texture of the mushroom cultivated with the liquid spawn was superior to that cultivated in the solid spawn.

• The Plant Pathology Journal
• /
• v.22 no.4
• /
• pp.309-313
• /
• 2006

Phytophthora blight(PB), caused by Phytophthora drechsleri f. sp. cajani is the third potentially important disease of pigeonpea in the Deccan Plateau(DP) of India after wilt and sterility mosaic. In the rainy-season of 2005, an outbreak of PB was seen throughout DP. To quantify the incidence and spread of the disease, a systematic survey was conducted in the major pigeonpea growing regions of DP during the crop season 2005. Attempts were made to determine the effect of cropping systems on the PB development and identify resistant cultivars, if any, grown by farmers and on research farms. Widespread incidence of PB was recorded on improved, and or local cultivars grown in different intercropping systems. Majority of improved cultivars grown at research farms were found susceptible to PB(>10% disease incidence). Pigeonpea intercropped with groundnut, black gram and coriander had less disease incidence(${\leq}10%$). Three wilt and SM resistant pigeonpea cultivars KPL 96053, ICPL 99044, and ICPL 93179 were found resistant(<10%) to PB as well. However, their resistance to PB needs confirmation under optimum disease development environments.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.759-766
• /
• 2018

This paper presents a high-speed axial-flux machine which utilizes the idea of sinusoidal shaped pole combined with a consequent iron-pole. The target of the proposed machine is the cost reduction of the relatively expensive Samarium-Cobalt (SmCo) permanent magnet (PM) material and the torque per PM volume improvement by using sinusoidal consequent-pole rotor. The effectiveness of the proposed machine is validated by comparing it with conventional consequent-pole and with conventional PM machines using 3-D finite element method (FEM) simulations. The comparison and analysis is done in terms of back electro-motive force (back-EMF) harmonic contents, torque per PM volume and torque ripple characteristics. The simulation results show that the proposed machine is suitable and cost-effective for high-speed and high torque per PM volume applications. Furthermore, due to the consequent pole, the magnetic flux saturation and the overload current torque-capability are also presented and discussed in the paper.

• Korean Journal of Veterinary Service
• /
• v.19 no.2
• /
• pp.115-125
• /
• 1996

A total of 315 microorgainisms were isolated from 256 pneumonic lung samples of pig in abattoirs of northern Chungnam area during February to November 1994, and Identified 97 strains as Pusteurella multocida, 89 strains as Staphylococcus spp, 54 strains as Streptococcus spp, 22 strains as Mycoplasma spp, 21 strains as Escherichia coli, 18 strains as Haemophilus parsuis, 11 strains as Corymebacteroi, pyogenes, and 3 strains as Acrinobacillus spp by Gram's and Dienes stain, and biological properties test Involved API system. After that, they were examined anti biotic susceptibility for ampicillin(AM), cephalothin(CF), chloramphenicol(CP), erythromycin(EM), kanamycin(KM), gentamicin(GM), neomycin(NM), penicillin(PC), streptomycin(SM), tetracycline(TE), tiamulin(TIA), tylosin(TYL), methicillin(DP), colistin(CL) and trimet hoprim(SXT). In antibiotics susceptibility test, 293 isolates except Mycoplasma spp 22 strain were highly susceptible to DF(79.2%) and AM(76.2%), but resistant to PC(14.0%), NM(19.5%) and KM (23.2%) The multiple drug resistant patterns were noted in most isolates, whereas only 7 isolates resistant to single drugs.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.681-688
• /
• 2019

SM45C steel, which is widely used for mechanical structure, was carburized at 870℃ for 4 hours and tempered at 300℃ and 400℃ for 1, 3 and 6 hours. The tempered materials were evaluated for tensile test, hardness test and impact test. In particular, the hardness and the absorption energy were evaluate the reliability by the Weibull statistical analysis. 300℃-1h specimen is considered to be the best heat treatment condition in the tensile stress and the observation of fracture surface. 300℃-1h specimen showed larger shape and scale parameter than the other specimens, and Rockwell hardness variance was small and showed the best characteristics. 400℃-3h specimen showed larger shape and scale parameter than the other specimens, the dispersion of impact absorption energy is small, and showed excellent characteristics.