• Journal of Welding and Joining
• /
• 제11권3호
• /
• pp.48-60
• /
• 1993

The cause of corrosion failure found in structures or various components operating in severe corrosive environments has been attributed to stress corrosion cracking(SCC)which is resulting from the combined effects of corrosive environments and static tensile stress. Slow strain rate test (SSRT) provides a rapid reliable method to determine SCC susceptibility of metals and alloys for a broad range of application. The chief advantage of SSRT procedures is that it is much more aggressive in producing SCC than conventional constant strain or constant load tests, so that the testing time is considerably reduced. Therefore, in this paper, the combined effects of material properties and strain rate on the tensile ductility and fracture morphology of parents and weldment for SM45C, SCM440 and SM20C steels were examined and discussed in synthetic sea water. The susceptibility of SCC was the most severe under the strain rate of $1.0{\times}10^{-6} sec^{-1}$, and R.O.A. can be used for parent and maximum load for weldment to evaluate the parameter for SCC susceptibility.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.139-149
• /
• 2001

The effects of the cutting conditions on the surface roughness of workpiece in turning were studied in this paper. The workpieces made of carbon steel SM20C and SM45C were tamed without the support of the tailstock center. Cutting conditions were changed in three or flour steps in each parameter and cutting fluid was used. The surface roughness results of tests were measured and the effects of the cutting conditions were analyzed by the method of analysis of variance. The summary of the experimental research is as follows. The main parameters were cutting speed, fred-rate, depth of cut, and the interactions between speed and fled-rate, speed and depth of cut, and fred and depth of cut. As cutting speed increased, surface roughness showed lower value. The surface roughnesses of feed-rate 0.102 mm/rev and 0.147 mm/rev were better than those of feed-rate 0.05 mm/rev and 0.2 mm/rev.

• 한국연소학회지
• /
• 제15권4호
• /
• pp.58-64
• /
• 2010

Spontaneous ignition tests of five different coals with non-iso-thermal and iso-thermal test method based on the standard test procedure of NF T20-036 were carried. These five coals included the 2 low rank coals and 3 bituminous coals. Test results showed that the ignition temperatures of all coals at the iso-thermal conditions were higher than that of non-isothermal condition, and those of low rank SM and BR coal in both nonisothermal and isothermal conditions were lower than bituminous AN and CN coals. The chemical species of coals such as oxygen and hematite also plays an important role in enhancing the ignition rate that the ignition temperature of SM coal was lowered. The heat accumulation tendency of five coals inside outdoor stack pile was monitored with emphasis on the change in the temperature of the coal depth in stack pile. In case of low rank BR coal, its temperature inside coal stack pile due to the rate of high heat accumulation and oxidation was $59^{\circ}C$ compared to $51^{\circ}C$ for other SW bituminous coal. And the heat accumulation rate inside coal stack piles was increased with increased the Cp value which it was defined as the specific heat of coal at constant pressure, whereas other factors such as thermal diffusivity and conductivity of coal relatively had less effect on heat accumulation.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.11-16
• /
• 1999

In this study, Ultra-precision finishing system using micro abrasive film experimented using experimental variable film feed speed and grinding speed and structural steel(SM45C) with respect to 12~3{\mu}m$ micro abrasive film. the result are follows; (1) Experimental condition must setup dissimilar about each micro abrasive film. (2) To measurement deviation the smallest machined condition are 20mm/min in 12{\mu}m$, 5mm/min and 15mm/min in 9{\mu}m$ and 5{\mu}m$, 5mm/min in 3{\mu}m$ in film feed speed. (3) To measurement deviation the smallest machined condition are 180m/min in 12{\mu}m$, 84m/min in 9{\mu}m$, 56 and 84m/min in 5{\mu}m$, 104m/min in 3{\mu}m$ in grinding speed.

• 멤브레인
• /
• 제9권2호
• /
• pp.97-106
• /
• 1999

조성이 각각 1.9 ${SiO}_2$-1.5 $Na_2O-Al_2O_3-40$ $H_2O$인 반응물과 $SiO_2-0.13 Na_2O-52$ $H_2O$-0.12 TPAOH 인 반응물로부터 다공성 지지판에 성장된 A 형 및 ASM-5형 제올라이트 결정박막을 합성하여 X 선회절분석기와 주사전자현미경으로 마그이 특성을 검토하였다. 알루미나 지지상에 붙어 성장한 ZSM-5gtud 제올라이트 결정은 치밀하게 서로 붙은 상태였다. A형 제올라이트는 지지체상에 치밀한 결정막으로 성장시키기가 어려웠으며, 반응시간을 연장시키면 물의 분리가 어려운 P형의 제올라이트결정막으로 전환되었다. 반응물을 조제할 때, 물은 첨가하지 않은 채로 혼합하고 디스크형으로 가압성형하여 100$^{\cirt}C$에서; 결정화시키면 단시간에 lcalf하게 성장된 A형 제올라이트 결정막을 합성할 수 있었다. 제조한 다공성 무기막들이 물과 알코올의 혼합액으로부터 물을 투과증발시키는 특성을 각각 검토하였다. 막으로 결정화시킨 A형 제올라이트는 미세세공의 분자체기능을 통하여 물과 알코올의 혼합수용랙에서 물만을 선택적으로 투과시키는 것을 알 수 있었다.

• 폴리머
• /
• 제26권2호
• /
• pp.179-184
• /
• 2002

양성자 전도도가 높으며 균일하고 또 기계적 강도가 우수한 양성자 전도체를 얻기 위하여 poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) 공중합체를 전해질의 지지체로 선택하고, $H_3PO_4$이 포함된 ethylene carbonate (EC)와 $\gamma$-butyrolactone (BL) 및 dimethyl carbonate (DMC)의 유기용매들을 혼합하여 겔-전해질을 제조하였다. 다양한 조성의 겔-전해질에 대하여 열분석과 전도도 측정 실험을 수행하였다. 상온에서 양성자 전도도는 30(PVdF-HFP) + 50EC/DMC + $20H_3PO_4$ 전해질에서 7.3$\times$$10^{-3}Sm^{-1}$/로 가장 높았다. 열분석 결과에서 거의 모든 시료는 대략 $80^{\circ}C$ 정도까지 안정하였으며, 특히 인산은 고분자 사슬과 민감하게 반응하여 고분자와 용매의 혼화성을 증대시키는 것을 확인하였다.

• 한국재료학회지
• /
• 제20권5호
• /
• pp.252-256
• /
• 2010

The study was done to change the morphology and pore size of SBA-15 silica, and the characteristics of SBA-15 silica were investigated with TG-DSC, XRD, SEM, TEM and N2 adsorption-desorption under changing aging conditions. SBA-15 silica having a 2D-hexagonal structure was synthesized and confirmed by SEM and TEM. The structure of mesoporus silica SBA-15 showed a pore having regularly formed hexagonal structure and a passage having a cylindrical shape. This result is in good agreement with the pore forming in XRD and cylindrical shape of the structure in $N_2$ adsorption-desorption isotherm. SBA-15 silica showed a large BET surface area of $603-698\;m^2/g$, a pore volume of $0.673-0.926\;cm^3/g$, a large pore diameter of 5.62-7.42 nm, and a thick pore wall of 3.31-4.37 nm. This result shows that as the aging temperature increases, the BET surface area, pore volume, and pore diameter increase but the pore wall thickness decreases. The BET surface areas in SM-2 and SM-3 are as large as $698\;m^2/g$. However, SM-2 has a large surface area and forms a thick pore wall, when the aging temperature is $100^{\circ}C$ and is synthesized into stable mesoporous SBA-15 silica.

• 대한소아치과학회지
• /
• 제38권1호
• /
• pp.33-41
• /
• 2011

본 연구의 목적은 상업용으로 시판되고 있는 수종의 치과용 접착제를 세대별로 분류하여 서로 다른 광원에 노출 시켜 중합하고 접착면의 전단 강도 측정을 통해 결합강도를 비교함으로써 간접적으로 광원에 따른 접착제의 중합 양상을 알아보고 소아치과 영역에서 가장 권장할만한 치과용 접착제와 광원 종류의 조합을 알아보고자 함이다. 본 연구에서는 최근에 개발된 치과용접착제를 대상으로 다른 유형의 광원으로 중합하였을 때 영구치 상아질에 대한 결합력 비교 평가하여 임상에서 상아질결합제와 광중합 시스템의 적절한 조합을 선택하는데 도움을 주고자 시행하였으며, 실험재료로 Adper Scotchbond Multi-purpose Plus Adhesive (SM; 3M ESPE, USA), Adper Single bond 2 (SB; 3M ESPE, USA), Clearfil SE Bond (SE; Kuraray Medical Inc., Japan), Adper Prompt L-Pop (PL; 3M ESPE, USA), GBond (GB; GC Cooperation Toyko, Japan)을 이용하여 Elipar Free light 2(LED; 3M ESPE, USA), OptiLux 501 (Halogen, Kerr, USA), Flipo (PAC, LOKKI, FRA) 세 가지의 광원으로 중합하고 전단결합강도를 평가한 뒤 다음과 같은 결과를 얻었다. 1. Freelight 2로 중합하였을 때 전단결합강도는 SM이 가장 높았으며($28.22{\pm}5.56$), SB($21.68{\pm}7.44$), SE($20.13{\pm}9.88$), PL($14.18{\pm}5.88$), GB($14.30{\pm}6.81$) 순이었다. SM은 PL, GB와 유의한 차이가 있었으나 (p<0.05), SB, SE, PL, GB 간에는 차이가 없었다. 2. Optiux 501로 중합하였을 때 전단결합강도는 SM이 가장 높았으며 ($22.06{\pm}7.95$), PL($12.94{\pm}4.96$), SB($12.80{\pm}3.35$), SE($12.43{\pm}4.79$), GB($10.00{\pm}3.47$) 순이었고, SM만 유의한 차이가 있었으나 (p<0.05), 다른 군 간에는 차이가 없었다. 3. Flipo로 중합하였을 때 전단결합강도는 SM이 가장 높았으며 ($26.82{\pm}11.16$), PL($15.42{\pm}9.35$), SB($10.96{\pm}3.74$), SE($9.39{\pm}3.74$), GB($7.85{\pm}2.22$) 순이었다. SM은 SB, SE, GB 군과 유의한 차이가 있었으나 (p<0.05), 다른 군 간에는 차이가 없었다. 4. 광원에 따른 차이는 SB와 GB에서만 유의성이 있었고, 다른 결합제에서는 유의한 차이가 없었다. 광원에 따른 유의성을 나타낸 결합제 중 SB는 Freelight 2가 다른 광원에 비해 유의한 차이를 보였고 OptiLux 501과 Flipo간의 차이가 없었던 반면, GB는 Freelight 2와 Flipo 간에만 유의한 차이를 나타냈다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권10호
• /
• pp.1308-1318
• /
• 2010

The purpose of this study was to evaluate the effect of replacing soybean meal with treated castor meal with (CMT) or without lime (CMNT) on the nutrient intake, performance, carcass characteristics, and yield of commercial cuts of beef cattle from a feedlot. Thirty male, castrated, crossbreed zebu cattle were used in the study, with an average initial weight of $360{\pm}30.27\;kg$. Five animals were used as a control group and were slaughtered at the beginning of the experiment; the remaining animals (n = 25) were distributed in random blocks (repetitions), with body weight as the criterion for block assignment. The animals were fed a diet containing 65% corn silage and 35% of concentrate on dry matter (DM) basis. Five diets consisted of four levels of soybean meal (SM) substituted with CMT (0, 33, 67 and 100%) on a DM basis and a diet with 100% of SM replaced with CMNT. At the end of the experiment, all animals were slaughtered, and their gastrointestinal tracts were emptied to determine their empty body weights (EBW). No significant effects were observed (p>0.05) for the substitution of soybean meal with CMT on intake of dietary nutrients, the average daily body weight gain (ADG) or EBW gain (EBWG). In spite of greater (p<0.05) ricin intake for the diet containing CMNT (3.06 mg/kg BW) compared to the CMT diet (0.10 mg/kg BW/d), there were no effects (p>0.05) on intake of dietary nutrients, ADG or EBWG. The average intake of DM and the ADG were 10,664.63 and 1,353.04 g/d, respectively. Regarding carcass characteristics, only carcass yield in relation to body weight was linearly reduced (p<0.05) upon substitution of SM by CMT. There was no effect (p>0.05) of the substitution of SM by CMT or CMNT on the yield of carcass basic cuts. CMT prices that are higher than 85% of the SM price do not economically justify the use of CMT. For CMT prices between 20 and 80% of the SM price, the optimal level was 67% substitution, while for prices below 15% of the SM price, the optimal level was 100% substitution with CMT. It can be concluded that treated castor meal with 6% lime can totally replace soybean meal in beef cattle diets.

• 대한수의학회지
• /
• 제29권4호
• /
• pp.493-501
• /
• 1989

A total of 108 strains of C jejuni isolated from pigs and chickens were examined for the susceptibility to 10 antimicrobial agents and normal sera of cattle, sheep, guinea pigs and chickens. Minimal inhibitory concentration(MIC) ranges of antimicrobial agents to C jejuni isolates were $${\leq_-}1.56$$ to $${\geq_-}100{\mu}g/ml$$ for erythromycin, rifampin, streptomycin and tetracycline, 50 to $${\geq_-}100{\mu}g$$ for cephalothin, $${\leq_-}1.56$$ to $50{\mu}g$ for ampicillin, $${\leq_-}1.56$$ to $25{\mu}g$ for kanamycin and nalidixic acid, $${\leq_-}1.56$$ to $12.5{\mu}g$ for chloramphenicol and gentamicin. Resistance rates of C jejuni were showed to in order of rifampin(84.7%), tetracycline(56.2 %), erythromycin(17.1%) and ampicillin(3.8%), all of the strains were sensitive to chloramphenicol, gentamicin and kanamycin, and the incidence rates of resistant C jejuni were highly frequent in pig isolates than chicken isolates. The drug resistance patterns of 87 chicken isolates C jejuni to 9 antimicrobial drugs were showed 12 patterns, and Sm Ra Tc(24.1%), Sm Ra(21.8%) and Ra Tc(14.9%) were relatively common, and also 21 pig isolates were showed 6 patterns and Em Sm Ra Tc(57.1%) were most frequent. The majority of the isolates showed multiple drug resistance. Bactericidal activity of 10% normal sera from healthy animals were examined for 60min at $37^{\circ}C$. C jejuni were decreased from 0.4 to 1.0 ${\log}_{10}$(p<0.01), and serum susceptibility were high in order of guinea pig, sheep, chicken and cattle sera. Serum sensitivity of C jejuni Ch-39 strain in increased serum concentation up to 10, 20, 40 and 80% were highly significant. In the normal animal serum, the number of Ch-39 strain were decreased from $1.8{\times}10^4/ml$ to $2.7{\times}10^3/ml$ after 60 min incubation(p<0.01), but the numbers were decreased to $6.6{\times}10^3/ml$ in the heat inactivated normal serum for 30 min at $56^{\circ}C$. Bactericidal activity was restored in the heat inactivated normal serum after the serum of complement source was added.