• Journal of the Korean Vacuum Society
• /
• v.21 no.2
• /
• pp.93-98
• /
• 2012

$Gd_{1-x}VO_4:{Eu_x}^{3+}$ phosphor powders were synthesized with changing the concentration of $Sm^{3+}$ ion by using a solid-state reaction method. The crystal structures of all the phosphors were found to be a tetragonal system, composed of (200) diffraction peak centered at $24.76^{\circ}$, and the morphology of grains approached the spherical form with homeogenous size distribution when the concentration of $Sm^{3+}$ ion was 0.05 mol. As for the photoluminescence properties, all of the phosphor powders, irrespective of $Sm^{3+}$ ion concentration, indicated the yellow, orange, and red emission peaked at 565, 603, and 645 nm respectively. As the concentration of $Sm^{3+}$ ion increases, the intensity of excitation spectrum showed a decreasing tendency on the increase of Sm3+ ion concentration. The maximum excitation and emission spectra were observed and the symmetry ratio was 1.19 at 0.05 mol of $Sm^{3+}$ ion.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.616-621
• /
• 1990

The spectrophotometric methods for the determination of Nd, Pr, Sm, Eu, Ho, Er were developed, using the multicomponent method of absorption spectra cointerference. The absorption spectra of individual Nd, Pr, Sm, Eu, Ho, Er, mixture of Sm, Eu, Ho, Er in hydrochloric acid solutions were investigated, and also a band register which includes the molar absorptions for all trivalent Nd, Pr, Sm, Eu, Ho and Er absorption band maxima were measured. The spectrophotometric determination of Nd, Pr, Sm, Eu, Ho and Er were investigated using the analytically significant absorption bands at 444.2, 575.1, 401.7, 394.2, 416.6, and 379.7 nm, respectively.

• Electrical & Electronic Materials
• /
• v.10 no.8
• /
• pp.819-829
• /
• 1997

The microwave dielectric materials of the BaO-Nd$_2$O$_3$-TiO$_2$and BaO-(Sm, Nd)$_2$O$_3$-TiO$_2$system were synthesized by conventional ceramic processing and sintered 1220 to 140$0^{\circ}C$ for 2 hours respectively. Their crystallization and dielectric properties were examined. In the BaO-Nd$_2$O$_3$-TiO$_2$ and BaO-(Sm, Nd)$_2$O$_3$-TiO$_2$system. Nd$_2$Ti$_2$O$_{7}$ and (Sm, Nd)$_2$Ti$_2$O$_{7}$ were observed as a second phase respectively. The maximum relative dielectric constant were 79,99 for the BaO-Nd$_2$O$_3$-TiO$_2$system and 105.07 for the BaO-(Sm,Nd)$_2$O$_3$-TiO$_2$system and their Q-value were over 2000 at 3GHz.GHz.

• Earthquakes and Structures
• /
• v.10 no.5
• /
• pp.1089-1109
• /
• 2016

Modified two-surface model (M2SM) is one of the steel elasto-plastic hysteretic constitutive models that consider both analysis accuracy and efficiency. However, when M2SM is used for complex strain history, sometimes the results are irrational due to the limitation of stress-strain path judgment. In this paper, the defect of M2SM was re-modified by improving the judgment of stress-strain paths. The accuracy and applicability of the improved method were verified on both material and structural level. Based on this improvement, the nonlinear time-history analysis was carried out for a deck-through steel arch bridge with a 200 m-long span under the ground motions of Chi-Chi earthquake and Niigata earthquake. In the analysis, we compared the results obtained by hysteretic constitutive models of improved two-surface model (I2SM) presented in this paper, M2SM and the bilinear kinematic hardening model (BKHM). Results show that, although the analysis precision of displacement response of different steel hysteretic models differs little from each other, the stress-strain responses of the structure are affected by steel hysteretic models apparently. The difference between the stress-strain responses obtained by I2SM and M2SM cannot be neglected. In significantly damaged areas, BKHM gives smaller stress result and obviously different strain response compared with I2SM and M2SM, and tends to overestimate the effect of hysteretic energy dissipation. Moreover, at some position with severe damage, BKHM may underestimate the size of seismic damaged areas. Different steel hysteretic models also have influences on structural damage evaluation results based on deformation behavior and low cycle fatigue, and may lead to completely different judgment of failure, especially in severely damaged areas.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.1
• /
• pp.9-15
• /
• 2020

Salinity with sodic condition disturbs germination, retards emergence, and slow down seedling development of Lemon Grass (Cymbopogon citratus).Lemongrass is a perennial grass plant widely distributed worldwide and most especially in tropical and subtropical countries. This research experiment was designed to evaluate the influences of (4 dSm^-1+ 13.5 (mmol L^-1)^-1/2, 5 dSm^-1+ 25 (mmol L^-1)^1/2, 5 dSm^-1+ 30 (mmol L^-1)^1/2, 10 dSm^-1+ 25 (mmol L^-1)^1/2 and 10 dSm^-1+ 30 (mmol L^-1)^1/2) on biomass produce of lemon grass against salt tolerance. The uppermost biomass yield (45.53 gpot^-1) was produced by 4 dSm^-1+ 13.5 (mmol L^-1)^1/2 treatment. The increase in the intensity of salts reduced the growth of lemon grass. Lower biomass yield (79.33 gpot^-1) was gained at 10 dSm^-1+ 30 (mmol L^-1)^1/2. 5 dSm^-1+ 25 (mmol L^-1)^1/2 treatment performed enhanced outcome i.e. the least reduction % over control (5.87). Salinity- sodicity showed serious effect on the growth reduction from 5.87% to33.60%. This reduction gap was affected by the negative effect of salinity and sodicity on Linseed growth. Salinity- sodicity showed severe impact on the growth reduction from 5.87% to33.60%. Based on the findings, lemon Grass (Cymbopogon citratus).was capable to grow up the maximum at 4 dSm^-1+ 13.5 (mmol L^-1)^1/2 treatment.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1977.06a
• /
• pp.3.1-3
• /
• 1977

Now a lot of antibiotics are available for daily clinical use. Streptomycin, above all them, is widely used because of its effects upon tuberculosis. Recently, however, the ototoxic effects of SM was noticed especially on the vestibular sensory organs, so called, SM deafness. The authors have clinically investigated the incidence of SM deafness of 198 cases of admission at Masan National Hospital for treatment of pulmonary tuberculosis. The results obtained were follows; 1. The incidence of SM deafness was 30 cases (15.2%) of total 198 cases. 2. SM deafness had a tendency to increase according to amount of administrated SM dose. 3. The administration of SM 1.0 gm. daily (17.4%) resulted in more frequent incidence than that (2.9%) of 1.0gm. single dose, twice a week. 4. The complication due to SM administration was 59 cases (2.98%). Among them, tinnitus was the most frequent symptom recording 14 cases (46.7%). 5. SM deafness had a tendency to begin with high frequency and than progress gradually to speech range. 6. As concern of type of audiogram, gradual descending type (40.0%) and horizontal type(30.3%) were the most frequent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.404-414
• /
• 2016

So called quaternary quasi-orthogonal sequence spatial modulation (Q-QOS-SM) has been presented with an advantage of improved throughputs compared to the conventional SM and generalized spatial modulation (GSM) by virtue of a larger set size of QOSs and its minimized correlation value between these QOSs. However the Q-QOS-SM has been originally invented for limited transmit antennas of only powers of two. In this paper, by extending the Q-QOS-SM to any number of transmit antennas, we propose a generalized Q-QOS-SM, referred as G-QO-SM. Unlike the conventional Q-QOS-SM using the Q-QOSs of length of any power of two, the proposed G-QO-SM is constructed based on the Q-QOSs of only the lengths of 2 and 4. The proposed scheme guarantees the transmission of the total $N_t$ spatial bits with $N_t$ transmit antennas, and thus achieves greatly higher throughputs than the other existing schemes including the SM, GSM, Q-QOS-SM, Quadrature-SM, and Enhanced-SM. The performance improvements of the proposed G-QO-SM is justified by comparing the analytically derived BER upper bounds and also the exact Monte Carlo simulation results.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.84-88
• /
• 2004

The polycrystalline superconductor $SmBa_2$$Cu_3$$O_{x}$ is fabricated, and intergranular magnetic properties are investigated using the critical state model, from which some useful parameters such as the critical current density and the intergranular volume fraction are obtained. The curve fitting for M-H hysteresis loop shows that the intergranular critical current density of $SmBa_2$$Cu_3$$O_{x}$ / decreases in the form of ($1-T/T_{c}$ )$^{1.5}$ . The intergranular volume fraction is influenced by granular morphology. From SEM image, the grains of $SmBa_2$$Cu_3$$O_{x}$ are found to be randomly shaped. This mean:; that the intergranular volume fraction of $SmBa_2$$Cu_3$$O_{x}$ / should be smaller than those of superconductors, of which grains are plate-shaped such as Tl-based superconductor.

• Journal of Magnetics
• /
• v.3 no.4
• /
• pp.99-104
• /
• 1998

The $ Sm_2Fe_{17}N_x $materials were prepared by the combination consisting of the HDDR (hydrogenation, disproportionation, desorption, and recombination) process and nitrogenation or by the conventional way consisting of nitrogenation only, and the magnetic and thermomagnetic properties of the materials were investigated. The magnetic characterisation of the prepared $ Sm_2Fe_{17}N_x $ materials was performed using a VSM. Thermal stability of the materials was evaluated using a DTA under Ar gas atmosphere. The thermomagnetic characteristics of the materials were examined using a Sucksmith-type balance. The previously HDDR-treated Sm2Fe17parent alloy was found to be nitrogenated more easily compared to the ordinary $ Sm_2Fe_{17}N_x $alloy. The $ Sm_2Fe_{17}N_x $ material produced by the combination method showed a high coercivity (12.9 kOe) even in the state of coarse particle size (around 60 ${\mu}{\textrm}{m}$). It was also revealed that the $ Sm_2Fe_{17}N_x $ material produced by the material produced by the combination showed an unusual TMA tracing featured with a low and constant magnetisation at lower temperature range and a peak just before the Curie temperature. This thermomagnetic characteristic was interpreted in terms of the competition between two counteracting effects; the decrease in magnetisation due to the thermal agitation at an elevated temperature and the increase in magnetisation resulting from the rotation of magnetisation of the fine grains comparable to a critical single domain size due to the decreased magnetocrystalline anisotropy at an elevated temperature.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.432-436
• /
• 1995

The hydrogen decrepitation behaviour of the $Sm_{2}Fe_{17} alloy containing 4at%Nb was examined by means of DTA and SEM metallography, and the magnetic properties of the alloy were studied by means of VSM or TMA. It has been found that a simple hydrogenation and degassing treatment for the alloy caused a poor hydrogen decrepitation. The cycle treatment consisting of repeated hydrogenation and degassing, however, caused a severe hydrogen decrepitation with a combination of intergranular and transgranular failure. The disproportionation temperature of the hydrogenated $Sm_{2}Fe_{17}-type alloy was enhanced significantly by small addition of Nb. It has also been found that the Curie temperature of $Sm_{2}Fe_{17} matrix phase in the Nb-containing alloy has been enhanced by the hydrogenation, and this was attributed to the increase in interatomic distance between the neighbouring iron atoms caused by the interstitial occupancy of the hydrogen atom into the $Sm_{2}Fe_{17}-type lattice. The magnetisation of the $Sm_{2}Fe_{17} alloy containing Nbwas found to be lower than that of the Nb-free alloy, and this was explained by the dilution effect due to the presence of the paramagnetic $Sm_{2}Fe_{17} phase.