• 한국정밀공학회지
• /
• 제29권3호
• /
• pp.307-312
• /
• 2012

This study aims to investigate the effect of the post weld treatments on the fatigue life of T-type welded structure made by a SM50A steel material, generally used for excavators, because changes in the geometry, material and surface properties of welded regions affect the fatigue life of welded structures. T-type test specimens were prepared by the CO2 welding of rolled steel plates (SM50A steel) with a thickness of 10 mm at a welding speed of 30 cm/min and these Ttype welded specimens were further treated by UIT (Ultrasonic Impact Treatment) and/or toegrinding post welding treatment methods. In order to investigate improvements on the fatigue life of the samples. 3-point bending fatigue tests were conducted with a stress ratio of R=0.1 under a cyclic loading environment at a frequency of 5 Hz, via a hydraulic fatigue testing machine (${\pm}100\;kN$, MTS 809). The tests were performed at room temperature. The fatigue life of UIT specimens was approximately 25 times longer than that of as-welded specimens at a stress amplitude of 281 MPa, while toe-grinding specimens exhibited 4.15 times longer fatigue life. The current results could provide important guidelines to determine the proper post weld treatment methodologies of T-type welded parts for excavators with a satisfactory fatigue life although under severe operating conditions.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.203-209
• /
• 2011

This study develops three new models that are practically applicable to three stages of Taguchi's robust design, which includes system design, parameter design and tolerance design. In system design, the Multiple Loss Function Analysis(MLFA) and Overall Loss Index(OLI) which reflect upon weight of characteristics and importance of specification are developed. Moreover parameter design presents Process Capability Index(PCI), $C_{PUK}$ and $C_{PLK}$, in order to segregate Signal-To-Noise Ratio(SNR) into accuracy and precision for an evaluation of relative comparison. In addition, tolerance design presents the new model of allowance computation for assembled product which is primarily derived from safety margin(SM) considering functional limit and specification. The guideline of those three new models, which include systematic charts and applicable illustrations, offers convenience for practitioners in the field. Hence, the practical applications could be made with the steps of robust designs such as system design, parameter design and specification allowance design.

• 한국항해학회지
• /
• 제25권2호
• /
• pp.107-118
• /
• 2001

이 논문에서는 가상현실 기법을 적용한 항로표지 훈련장치로서, 프로토 타입의 항로표지 시뮬레이션 시스템(AtoNSiS) 개발에 관하여 기술하였다. 항로표지에 대한 시뮬레이션 경험을 향상하기 위하여 3차원으로 측방표지와 방위표지를 제작한 후, IALA-B 방식에 의거한 가상의 3차원 항로를 구축하였다. 이 연구에서 개발한 AtoNSiS는 시뮬레이션 모듈(SM)과 설명 모듈(EM)로 구성하였는데, SM은 다양한 해상환경 변화가 가능한 가상의 항해 공간을 사용하여 IALA-B 시스템을 학습하기 위한 기능을 갖는다. EM은 생성한 3차원 측방 및 방위표지를 이용하여 각 표지들의 상세한 특성을 학습하기 위한 기능을 갖는다. 이러한 AtoNSiS에 대한 설계개념과 개발과정 및 시뮬레이션 실험 등을 나타냈다. 5명의 시청자를 대상으로 실험한 결과 AtoNSiS가 유용함을 알 수 있었다.

• Journal of Communications and Networks
• /
• 제9권4호
• /
• pp.473-481
• /
• 2007

Energy efficiency is one of the most critical concerns for wireless sensor networks. By allowing sensor nodes in close proximity to cooperate in transmission to form a virtual multiple-input multiple-output(MIMO) system, recent progress in wireless MIMO communications can be exploited to boost the system throughput, or equivalently reduce the energy consumption for the same throughput and BER target. However, these cooperative transmission strategies may incur additional energy cost and system overhead. In this paper, assuming that data collectors are equipped with antenna arrays and superior processing capability, energy efficiency of relevant traditional and cooperative transmission strategies: Single-input-multiple-output(SIMO), space-time block coding(STBC), and spatial multiplexing(SM) are studied. Analysis in the wideband regime reveals that, while receive diversity introduces significant improvement in both energy efficiency and spectral efficiency, further improvement due to the transmit diversity of STBC is limited, as opposed to the superiority of the SM scheme especially for non-trivial spectral efficiency. These observations are further confirmed in our analysis of more realistic systems with limited bandwidth, finite constellation sizes, and a target error rate. Based on this analysis, general guidelines are presented for optimal transmission strategy selection in system level and link level, aiming at minimum energy consumption while meeting different requirements. The proposed selection rules, especially those based on system-level metrics, are easy to implement for sensor applications. The framework provided here may also be readily extended to other scenarios or applications.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.2021-2034
• /
• 2008

This paper shows the result of study on the process improvement/innovation based on CMMI(Capability Maturity Model Integration) for Development V1.2 staged representation in the view of engineering area of software, hardware and system. This paper intend to help rolling stock industry to define & innovate process and finally obtain certificate for achievement of CMMI V1.2 from SEI authorized SCAMPI Lead Appraiser through the introduction experienced by Hyundai Rotem Company(car-builder and supplier of electronic & electrical equipment) such as why CMMI-based process definition & improvement are planned and how each processes of CMMI V1.2 Level 3 have been implementing and how obtaining the certificate of CMMI Maturity Level 3 of CMMI for Development V1.2 staged representation etc. This paper shows the introduction to CMMI V1.2 model, process improvement methodology and CMMI appraisal on the basis of Standard $CMMI^{SM}$ Appraisal Method for Process Improvement($SCAMPI^{SM}$), V1.2. And, this paper shows about what kinds of activities/practices of 18 processes(CMMI Maturity Level 3) is essentially implemented to satisfy their's specific goal and general geal through Hyundai Rotem Company's experiences. This paper shows the advantage and problem by adopting CMMI V1.2 model. Especially, it present the corrective/preventive actions against the identified problem in order to improve processes.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1190-1202
• /
• 2009

A 3D body scan measurement (SM) is used as an alternative to physical measurements (PM) as the information for designing industrial products. This study compared the mean difference (MD) between SM and PM by gender and analyzed the causes of the difference. The data used in this study were the scan measurements and physical measurements of adults aged twenty to seventy years old of the fifth Size Korea survey. The results of this study are as follows: 1. The comparison of MD between men and women for all subjects: The measurement of the significant differences between men and women were height, neck base girth, chest girth, under-bust girth, waist girth, armscye girth, back length, and foot length. The causes of difference are the difference of body shape. 2. The comparison of MD between men and women by BMI groups: Many measurements had significant differences between men and women at normal weight and overweight but underweight. Some measurements had significant differences only at a specific BMI group because the body shape difference between men and women is revealed clearly in the group. The comparison of MD between men and women by age groups: The measurements that show significant difference at more than four age groups were neck girth, chest girth, under-bust girth, waist girth, armscye girth, and foot length. The height and abdomen girth had a significant difference in the age range of 20's and 30's. There were measurements that increase MD with an increase in age; under-bust girth and lateral shoulder length for women and lateral shoulder length for men. This comparison of MD between men and women provide the correct guidelines for the use of SM.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.141-147
• /
• 2014

This study aims to investigate the influence of bevel angles on the fatigue life of V-groove butt-welded joints with back-plates made by SM490A steel material, generally used for excavators, because changes in the geometry, material and surface properties of welded regions affect the fatigue life of welded structures. Butt type test specimens were prepared by the $CO_2$ welding of rolled steel plates (SM50A steel) with a thickness of 13.5 mm at a welding speed of 30 cm/min and these Butt type test specimens had two different groove angles, which are $40^{\circ}$ (A type) and $30^{\circ}$ (B type). In order to investigate differences in fatigue life between two types, 4-point bending fatigue tests were conducted with a stress ratio of R=0.1 under the cyclic loading environment at a frequency of 5 Hz at room temperature. The fatigue life of A type specimens was approximately 7% higher than that of B type specimens. The stress concentration factors calculated by finite element analysis were 2.16 for A type and 2.25 for B type, whose difference was caused by the influence of the back-plates of butt-welded structures. The current results could provide important guidelines to determine the V-groove angle of butt-welded joints with a satisfactory fatigue life, although under severe operating conditions.

• Journal of Gastric Cancer
• /
• 제23권2호
• /
• pp.355-364
• /
• 2023

Background: There are no clear guidelines to determine whether to perform D1 or D1+ lymph node dissection in early gastric cancer (EGC). This study aimed to develop a nomogram for estimating the risk of extraperigastric lymph node metastasis (LNM). Materials and Methods: Between 2009 and 2019, a total of 4,482 patients with pathologically confirmed T1 disease at 6 affiliated hospitals were included in this study. The basic clinicopathological characteristics of the positive and negative extraperigastric LNM groups were compared. The possible risk factors were evaluated using univariate and multivariate analyses. Based on these results, a risk prediction model was developed. A nomogram predicting extraperigastric LNM was used for internal validation. Results: Multivariate analyses showed that tumor size (cut-off value 3.0 cm, odds ratio [OR]=1.886, P=0.030), tumor depth (OR=1.853 for tumors with sm2 and sm3 invasion, P=0.010), cross-sectional location (OR=0.490 for tumors located on the greater curvature, P=0.0303), differentiation (OR=0.584 for differentiated tumors, P=0.0070), and lymphovascular invasion (OR=11.125, P<0.001) are possible risk factors for extraperigastric LNM. An equation for estimating the risk of extraperigastric LNM was derived from these risk factors. The equation was internally validated by comparing the actual metastatic rate with the predicted rate, which showed good agreement. Conclusions: A nomogram for estimating the risk of extraperigastric LNM in EGC was successfully developed. Although there are some limitations to applying this model because it was developed based on pathological data, it can be optimally adapted for patients who require curative gastrectomy after endoscopic submucosal dissection.

• Journal of Construction Engineering and Project Management
• /
• 제5권2호
• /
• pp.11-15
• /
• 2015

The Last PlannerSystem (LPS) has been implemented on construction projects to increase work flow reliability, a precondition for project performance againstproductivity and progress targets. The LPS encompasses four tiers of planning processes:master scheduling, phase scheduling, lookahead planning, and commitment / weeklywork planning. This research highlights deficiencies in the current implementation of LPS including poor lookahead planning which results in poor linkage between weeklywork plans and the master schedule. This poor linkage undetermines the ability of theweekly work planning process to select for execution tasks that are critical to projectsuccess. As a result, percent plan complete (PPC) becomes a weak indicator of project progress. The purpose of this research is to improve lookahead planning (the bridgebetween weekly work planning and master scheduling), improve PPC, and improve theselection of tasks that are critical to project success by increasing the link betweenShould, Can, Will, and Did (components of the LPS), thereby rendering PPC a betterindicator of project progress. The research employs the case study research method to describe deficiencies inthe current implementation of the LPS and suggest guidelines for a better application ofLPS in general and lookahead planning in particular. It then introduces an analyticalsimulation model to analyze the lookahead planning process. This is done by examining the impact on PPC of increasing two lookahead planning performance metrics: tasksanticipated (TA) and tasks made ready (TMR). Finally, the research investigates theimportance of the lookahead planning functions: identification and removal ofconstraints, task breakdown, and operations design.The research findings confirm the positive impact of improving lookaheadplanning (i.e., TA and TMR) on PPC. It also recognizes the need to perform lookaheadplanning differently for three types of work involving different levels of uncertainty:stable work, medium uncertainty work, and highly emergent work.The research confirms the LPS rules for practice and specifically the need to planin greater detail as time gets closer to performing the work. It highlights the role of LPSas a production system that incorporates deliberate planning (predetermined andoptimized) and situated planning (flexible and adaptive). Finally, the research presents recommendations for production planningimprovements in three areas: process related, (suggesting guidelines for practice),technical, (highlighting issues with current software programs and advocating theinclusion of collaborative planning capability), and organizational improvements(suggesting transitional steps when applying the LPS).

• 원예과학기술지
• /
• 제30권6호
• /
• pp.635-641
• /
• 2012

In Korea, slurry composted and biofiltered (SCB) liquid fertilizer is produced through the composting and biofiltering of animal waste. An appropriate guidelines involving proper treatment of SCB liquid fertilizer on turfgrass should be considered. An experiment was conducted to determine the optimum application amount, timing, and frequency of SCB liquid fertilizer for Zoysia japonica 'Millock'. The SCB liquid fertilizer was applied in low, medium, and high amount (N at 15, 25, and 40 $g{\cdot}m^{-2}$ per year in 2010, and 10, 20, and 40 $g{\cdot}m^{-2}$ per year in 2011, respectively) and treated during the growing season or dormancy period. During the growing season, SCB liquid fertilizer was applied twice or four times. The greatest improvement in turf quality for both years was in SCB plots applied four times with N at 40 $g{\cdot}m^{-2}$ per year during the growing season (SH4). This treatment exhibited turf color retention in the fall, and enhanced clipping yield during the growing and fall seasons. SCB plots with four times during the growing season (SL4, SM4, and SH4) exhibited higher shoot density relative to the same amount of other SCB treatments. Plots treated during the dormancy period also showed a high turf color index during the next growing season in 2011. The results indicate that SCB with high amount up to N at 40 $g{\cdot}m^{-2}$ per year applied four times during the growing season and dormant application produced high turf quality and growth, and could be recommended as an optimum application guide.