Resisting strength of ring-stiffened cylindrical steel shell under uniform external pressure was evaluated by geometrically and materially nonlinear finite element method. The effects of shape and amplitude of geometric initial imperfection, radius to thickness ratio, and spacing of ring stiffeners on the resisting strength of ring-stiffened shell were analyzed. The resisting strength of ring-stiffened cylindrical shells made of SM490 obtained by FEA were compared with design strengths specified in Eurocode 3 and DNV-RP-C202. The shell buckling modes obtained from a linear elastic bifurcation FE analysis were introduced in the nonlinear FE analysis as initial geometric imperfections. The radius to thickness ratios of cylindrical shell in the range of 250 to 500 were considered.
Indirect fluorescent antibody test(IFAT) and enzyme-linked imuunosorbent assay (IgG-ELISA) as serological diagnostic tools were conducted to evaluate the usefulness for diagnosis of canine babesiosis infected with Babesia gibsoni in domestic various dog breeds, american pit bullterrier, military shepherd, and mongrel dogs. The results obtained from this study were abstracted as follows. The nonionic detergent Triton X-100 and absorbent bio-bead $SM_2$ were useful reagents for the preparation of pure merozoite antigen of B gibsoni to be used in ELISA. The optimum reaction in ELISA was shown when the protein concentration of ELISA antigen was measured as 625ng/ml and the conjugate concentration was diluted into 1/6000 fold. The average OD value of ELISA in sera determined with negative responses in IFAT was measured as $0.255{\pm}0.051$(490nm) and the cut - off value of OD was determined as 0.399(490nm). The serum antibodies in both of IFAT and ELISA were detected on one week after artificially infected with B gibsoni and these high antibody titers, 512X in IFAT and 1024X in ELISA, were long lasted until 15 weeks after infection. The reproducibility of reaction and stability of the antigen absorbed microtitration polystyrene plate preserved in $4^{\circ}C$ refrigerator and $-20^{\circ}C$ freezer, respectively could be lasted until 135 days after storage. The positive rates in IFAT by dog breeds were shown 8.1%(60/744 heads) in mongrel dogs, 81.3%(78/96 heads) in american pit bullterrier and 15.6%(15/96 heads) in military shepherd, while the positive rate in ELISA shown 17.6%(131/744 heads) in mongrel dogs, 83.3%(80/96 heads) in american pit bullterrier and 36.5%(35/96 heads) in military shepherd, respiectively. In the total of 936 heads surveyed with IFAT and ELISA the positive rates in IFAT and ELISA were 16.4%(153/936 heads) and 26.3%(246/936 heads), respectivily. Agreement of reactions between IFAT and ELISA was shown 82.4% in 936 dog sera. The specificity and sensitivity of ELISA reaction were 83.5% and 76.5%, respectively. From the conclusion obtained in this study it was evaluated that IFAT and ELISA were useful as highly specific, sensitive and stable serelogical tools for the diagnosis of canine babesiosis in Korea.
Proceedings of the Mineralogical Society of Korea Conference
/
2001.06a
/
pp.143-144
/
2001
경기육괴의 남서부에 해당하며 옥천구조대의 북쪽에 위치한 백동-홍성 일대의 충청남도 일원에는 선캠브리아기의 편마암복합체내에 초염기성암체들이 소규모 렌즈상의 암체로 이 지역에 우세한 구조선 방향인 북북동 방향으로 배열되어 산출된다. 이들 초염기성암채들이 조산대에 형성되는 알파인형이며 전형적인 상부 맨틀기원의 암석이 부분용융된 맨틀 잔여물로서 지표로의 이동과정에서 변성작용을 받아 대부분은 사문석화 혹은 활석화된 것으로 보고되어 있다. 본 연구의 주대상인 변성염기성암을 포함하는 백동지역의 초염기성암은 홍성도폭내 덕정리 편암암체 내에 주변 편마암체와 단층으로 접하면서 나타난다. 덕정리 편마암체는 주로 각섬석 화강편마암으로 구성되어있다. 백동지역의 초염기성암내에는 변성염기성암이 층상으로 협재되어 나타난다. 이들 변성염기성암은 석류석, 단사휘석, 각섬석, 사장석으로 주로 이루어진 석류석 각섬암이며 금홍석도 포함하고 있다. 많은 석류석 주변에는 사장석과 각섬석으로 이루어진 심플렉타이트가 발달되어있다. 석류석 각섬암내 심플렉타이트가 형성되지 않은 석류석 가장자리로부터 계산된 변성 온도-압력 조건은 590-72$0^{\circ}C$, 9-l0kb이며 심플렉타이트가 잘 형성된 석류석 주변부로부터는 490-$600^{\circ}C$, 4-6.3kb의 변성 온도-압력 조건이 계산되었다. 이에 반해 변성염기성암을 포함한 초염기성암체 주변에 나타나는 석류석-각섬석 화강편마암으로 부터는 570-78$0^{\circ}C$, 11.6-l6kb의 변성 온도-압력 조건을 얻었다. 석류석 각섬암에서 석류석내에 포획물로 나타나는 휘석(Xjd, 4-11)이 기질에 나타나는 휘석(Xid, 1-6)보다 높은 제이다이트 성분을 갖는다. 이는 석류석 중심부가 석류석 주변부보다 변성압력 조건이 높았을 가능성을 지시한다. 즉 연구지역의 석류석 각섬암은 주변의 각섬석 화강편마암과 같이 에콜로자이트상-상부각섬암상-고압백립암상의 점이대에 해당하는 변성작용을 받은후 초염기성암의 사문암화 작용시기에 1차 후퇴변성작용을 그리고 그후의 활석화 시기에 심플렉타이트를 형성하는 2차 후퇴변성작용을 받았다. 이러한 후퇴변성작용시기에 많은 유체가 침입하였고 그 결과 초염기성암내의 변성염기성암이 주변 화강편마암보다 후퇴변성작용을 강하게 받았을 것으로 예상된다. 변성염기성암의 변성연대를 구하기 위해 두 석류석 각석암 시료에 대해 석류석-전암 Sm-Nd 등시선 연령을 구하였다. 두 개의 석류석 각섬암으로부터 계산된 전암-석류석 연령은 297.9$\pm$5.7(2$\sigma$)Ma 그리고 268.7$\pm$3.3(2$\sigma$)Ma를 나타낸다. 석류석의 Sm-Nd 폐쇄온도가 700-75$0^{\circ}C$임을 고려할 때 두 석류석 각섬암으로부터 계산된 연대는 최고 변성작용 혹은 초기 냉각 시기를 지시할 가능성이 높다. 한편 전암의 두 동위원소 자료로부터 계산된 전암의 연령은 408Ma이다. 이러한 연구 결과는 연구지역의 석류석 각섬암이 시루리아기 후기 혹은 데본기 초기에 관입 후 석탄기 후기에서 페름기 중기에 주변 화강편마암과 함께 섭입작용을 받았을 가능성을 지시한다.
Hyun Joo Yoo;Hayemin Lee;Han Hong Lee;Jun Hyun Lee;Kyong-Hwa Jun;Jin-jo Kim;Kyo-young Song;Dong Jin Kim
Journal of Gastric Cancer
/
v.23
no.2
/
pp.355-364
/
2023
Background: There are no clear guidelines to determine whether to perform D1 or D1+ lymph node dissection in early gastric cancer (EGC). This study aimed to develop a nomogram for estimating the risk of extraperigastric lymph node metastasis (LNM). Materials and Methods: Between 2009 and 2019, a total of 4,482 patients with pathologically confirmed T1 disease at 6 affiliated hospitals were included in this study. The basic clinicopathological characteristics of the positive and negative extraperigastric LNM groups were compared. The possible risk factors were evaluated using univariate and multivariate analyses. Based on these results, a risk prediction model was developed. A nomogram predicting extraperigastric LNM was used for internal validation. Results: Multivariate analyses showed that tumor size (cut-off value 3.0 cm, odds ratio [OR]=1.886, P=0.030), tumor depth (OR=1.853 for tumors with sm2 and sm3 invasion, P=0.010), cross-sectional location (OR=0.490 for tumors located on the greater curvature, P=0.0303), differentiation (OR=0.584 for differentiated tumors, P=0.0070), and lymphovascular invasion (OR=11.125, P<0.001) are possible risk factors for extraperigastric LNM. An equation for estimating the risk of extraperigastric LNM was derived from these risk factors. The equation was internally validated by comparing the actual metastatic rate with the predicted rate, which showed good agreement. Conclusions: A nomogram for estimating the risk of extraperigastric LNM in EGC was successfully developed. Although there are some limitations to applying this model because it was developed based on pathological data, it can be optimally adapted for patients who require curative gastrectomy after endoscopic submucosal dissection.
Kim, Hyeon-Su;Park, Tae-Jong;Lee, Dong-Ju;Shin, Sang-Beom;Kim, Myung-Hyun
Journal of Welding and Joining
/
v.35
no.1
/
pp.61-67
/
2017
Recent studies on the fatigue assessment of high strength steel weld based on the fracture mechanics have frequently raised the problems related to the conservatism in the fatigue crack growth rate specified in the relevant design code. The purpose of this study is to evaluate the effect of the fatigue crack growth parameter on the fatigue life for the low carbon steel weld. In order to do it, the fatigue tests with the constant stress ratio were performed to evaluate the fatigue crack growth rate in the butt weld of SM490. And the fatigue crack growth parameters of the weld were evaluated in accordance with ASTM E647. From the comparative fatigue assessment results, it was found that the fatigue crack growth rate specified in the relevant design code was too conservative to estimate the residual fatigue life of welded structure. So, in order to get the more reliable results, it was recommended that the fatigue life estimation based on the fracture mechanics be performed with the fatigue crack growth parameter specified by test.
Kim, Ill Soo;Lee, Jong Pyo;Lee, Ji Hye;Jung, Sung Myoung;Kim, Young Su;Chand, Reenal Ritesh;Park, Min Ho
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.22
no.1
/
pp.22-28
/
2013
Robotic GMA (Gas Metal Arc) welding process is one of widely acceptable metal joining process. The heat and mass inputs are coupled and transferred by the weld arc to the molten weld pool and by the molten metal that is being transferred to the weld pool. The amount and distribution of the input energy are basically controlled by the obvious and careful choices of welding process parameters in order to accomplish the optimal bead geometry and the desired quality of the weldment. To make effective use of automated and robotic GMA welding, it is imperative to predict online faults for bead geometry and welding quality with respect to welding parameters, applicable to all welding positions and covering a wide range of material thickness. MD (Mahalanobis Distance) technique was employed for investigating and modeling the GMA welding process and significance test techniques were applied for the interpretation of the experimental data. To successfully accomplish this objective, two sets of experiment were performed with different welding parameters; the welded samples from SM 490A steel flats. First, a set of weldments without any faults were generated in a number of repeated sessions in order to be used as references. The experimental results of current and voltage waveforms were used to predict the magnitude of bead geometry and welding quality, and to establish the relationships between weld process parameters and online welding faults. Statistical models developed from experimental results which can be used to quantify the welding quality with respect to process parameters in order to achieve the desired bead geometry based on weld quality criteria.
Proceedings of the Korean Geotechical Society Conference
/
2005.03a
/
pp.483-490
/
2005
At present around 50 companies have their own crushing plants, which manufacture rock into crushed sand, over around 350 different quarry throughout the nation. However, in most plants the stone dust sludge is left as it is in their plants so that they have difficulty to utilize. Furthermore, environmental pollution may be even caused due to dust generated when it is dried. Recycling is starting capturing the attention of the people working over the quarry due to the reasons described above. This research has studied in the quarters the usability as landfill liner of the stone dust sludge, which is industrial waste. We investigated what technological properties it would have after mixing the stone dust sludge with SM(sandy soil) first and then with blast furnace slag or reject ash, which is waste, and cement as the stabilizer. As the result of three tests; compacting test, strength test, and permeability test; to satisfy the regulatory guideline of the government that is the compress strength over 5 $kgf/cm^2$, the flexibility over 1 $kgf/cm^2$, and the permeability under $1.0{\times}10^{-7}cm/sec$ From this research, we could confirm that stone dust sludge would be used as waste landfill liner if it were mixed with other waste by the proper mixing ratio.
This study investigates the effects of the material properties and the fatigue behaviors in the SM490A material butt weld specimens due to the heat-treatment and the grinding. In the fatigue behavior, the heat-treatment affects the fatigue life. The S-N curves of both matrix specimen and butt weld specimen are reversed at some cycle by the existence or nonexistence of heat-treatment. The grinding on the bead makes the fatigue limit decrease in the all specimens. But the reinforcement removed, the fatigue limit increases at the high cycle. Also, this study investigates the fatigue life estimation by examining butt weld bead profiles. The butt weld beads, which are welded by semi-robot method, have non-uniform bead profiles described by $\theta,\;\rho$ and h. The stress concentration factors $K_t$, are changed by each different $\theta,\;\rho$ and h from 1.395 to 2.863. Hence, the sensitivity of $K_t$ is changed by each $\theta,\;\rho$ and h. As $\theta$ becomes lower and $\rho$ and h become higher, $K_t$ increases. The fatigue life can he estimated very closely for the AAY specimens without residual stress using only butt weld bead profiles. But, fur the AAN specimens with residual stress, the fatigue life must be estimated by considering both the weld bead profiles and the residual stress data.
Transactions of the Korean Society of Mechanical Engineers A
/
v.40
no.8
/
pp.693-701
/
2016
In this study, notch defects are evaluated using fracture mechanics. To understand the effects of notch defects, FE analysis is conducted to predict the limit load and J-integral for middle-cracked and single-edge cracked plates with various sizes of notch under tension and bending. As the radius of the notch increases, the energy release rate also increases, although the limit load remains constant. The values of fracture toughness($J_{IC}$) of SM490A are determined for various notch radii through FE simulation instead of conducting an experiment. As the radius of the notch increases, the energy release rate also increases, together with a more significant increase in fracture toughness. To conclude, as the notch radius increases, the resistance to crack propagation also increases.
현장의 GMA 용접기는 일반적으로 용접기 본체로부터 와이어 송급장치까지의 거리가 약 50m 정도 떨어져 있고 송급장치로부터 토치까지의 거리는 약 3~5m 정도이다. 특히 국산 GMA 용접기의 와이어 송급장치는 DC 모터의 일종인 프린트모터를 사용하고 있으며 제어기는 오픈루프 제어를 하고 있다. 따라서 와이어 송급속도의 변동을 보상할 수 있는 어떤 수단도 장착되어 있지 않다. 또한 송급장치와 토치간 와이어를 안내하는 케이블 도관의 마찰 때문에 토치 끝단에서의 와이어 송급속도가 불규칙해질 수밖에 없다. 용접 시 와이어 송급속도의 순간적인 변동 때문에 용접부의 전류 파형이 매우 불규칙해지고 이 때문에 용융된 용적이 용융풀로 이행하지 못하고 스패터로 비산하는 현상을 발생시킨다. 본 연구에서는 이를 해결하고자 국산 SCR 용접기 및 인버터 용접기와 호환 가능한 디지털 제어형 와이어 송급장치와 Push-Pull 용접 토치를 개발하였다. 또한, 개발된 시스템을 이용하여 정 역 방향 제어기술을 적용하였고 아크 발생 시의 스패터 최소화 공정을 제안하였다. 실험은 SM490A 강재를 사용하여 BOP(Bead On Plate) 용접을 실행하였다. 용접 중 LabVIEW를 이용하여 아크 발생 초기 전류, 전압 그리고 와이어 송급속도를 측정하였고, 고속 카메라를 이용하여 용접현상을 분석하였다. 본 연구를 통해 아크 발생 초기의 스패터를 최소화하는 공정을 도출할 수 있었다. 용접공정 변수인 아크 발생 초기의 와이어 송급속도, 와이어의 역송급 진행거리 그리고 역송급 판단 시점의 용접 전류 값은 실험을 통해 얻을 수 있었다. 또한, 이 연구를 통해 개발된 시스템의 성능을 평가하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.