• 대한관절경학회:학술대회논문집
• /
• 2008.04a
• /
• pp.23-28
• /
• 2008

1. 손상받은 조직을 보호하면서 동시에 주위 조직과의 유착을 방지하고 soft tissue의 pliability를 유지시켜 관절 운동 범위를 향상하기 위해 통증을 유발하지 않는 범위 내에서 부드러운 수동 관절 운동을 먼저 실시한다. 2. 모든 재활 프로그램은 환자의 개개인의 특성에 맞춰 운동 내용과 시기를 조정해야 한다. : Important to individualize rehab. program. 3. 능동적 관절운동 (active ROM)은 수술한 조직이 치유될 충분한 시간이 경과되었거나 환자가 통증없이 독립적인 견관절 운동이 가능할 때 실시한다. 4. Strengthening of the dynamic stabilizer(muscles around shoulder joint) 가 모든 shoulder instability 재활에 가장 기본적인 요소이다.

• ETRI Journal
• /
• v.6 no.4
• /
• pp.41-44
• /
• 1984

디지틀 가입자 교환기 및 가입자 장치의 Subscriber, Line Circuit(SLC)에서는 서비스의 질 및 가격의 저렴화 추구에 따라 디지털 신호처리(DSP) 기술의 응용을 위한 연구가 크게 활성화되고 있다. 본 연구에서는 기존 SLC에서의 CODEC과 필터 기능, 2선 임피던스 정합 및 transhybrid balance기능을 DSP의 programmability 및 flexibility를 최대로 활용, 디지틀 필터에 의해 실현할 수 있도록 그 구성을 시도하였다.

• Clinics in Shoulder and Elbow
• /
• v.9 no.1
• /
• pp.105-110
• /
• 2006

Purpose: This study reports the clinical results of the arthroscopic Bankart repair in traumatic anterior instability of the shoulder with bio-knotless anchor. Materials and Methods: 21 cases of 21 patients (20 male and 1 female) were included in this study. The average age was 24.8 years old and the period from the first injury to operation was average 37.2 months. All cases had Bankart lesion and 12 cases had Hill-Sachs' lesion. The SLAP lesion was associated in 6 cases. Preoperative Rowe score was average 29.1. Arthroscopic Bankart repair with bio-knotless anchor were performed in all cases; 3 anchors at 3, 4, 5 O'clock position of the glenoid were used in 11 cases and 2 anchors at 4, 5 O'clock position were used in 10 cases. All the associated SLAP lesions were repaired arthroscopically with bio-knotless anchor. Thermal capsular shrinkage at the anterior and inferior shoulder capsule after the Bankart repair was performed in 3 cases. The average follow up period was 20.2 months. Results: The Rowe score improved to 92.8, excellent in 17 cases and good in 4 cases, at last follow up period and 20 cases had full range of motion of the shoulder. 1 case had mild limited range of motion of the shoulder (150 degrees in flexion, 60 degrees in external rotation and T12 level in internal rotation) without any problem in normal activity. The arthroscopic revision surgery of the shoulder was performed in 1 case because of multiple traumatic injuries of the shoulder with pain postoperatively. Conclusion: Arthroscopic Bankart repair with bio-knotless anchor in traumatic anterior shoulder instability is one of the good methods because of the good clinical results.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.141-149
• /
• 2017

Vulnerability assesses the loss of major performance functions of GCV (Ground Combat Vehicles) when it is hit by enemy's shell. To decide the loss of major functions, it is determined what effects are on the performance of GCV when some components of GCV are failed. M&S (Modeling and Simulation) technology is used to vulnerability assessment. The hydro-pneumatic suspension is used as a sample part. The procedures of vulnerability assessment of the hydro-pneumatic suspension are shown as follows: 1) The components of the suspension are defined, and shot lines are generated evenly around the part. 2) The penetrated components are checked by using the penetration equation. 3) The function model of the suspension is designed by using IDEF0. 4) When the failure of the critical components of the suspension happens, its effect on the function of the suspension can be estimated using DMEA (Damage Mode and Effects Analysis). 5) The diagram of FTA (Fault Tree Analysis) is designed by exploiting DMEA. 6) The damage probability of the suspension is calculated by using FTA and vulnerable area method. In this paper, SLAP (Shot Line Analysis Program) which was developed based on COVART methodology. SLAP calculates the damage probability and visualizes the vulnerable areas of the suspension.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.411-412
• /
• 2002

Piston-cylinder system are widely used in power engineering applications. In reciprocating refrigeration compressors, where extremely low friction losses are required, ringless pistons are being used to diminish the friction between piston rings and cylinder wall. Since the ringless piston has the freedom of lateral motion there is a potential danger that it will occasionally hit the cylinder wall while moving up and down along it's axis. A good design must therefore provide a smooth and stable reciprocating motion of the piston and ensure that the fluid film separating the piston from the cylinder wall is maintained all times. And the compromise between refrigerant gas leakage through the piston-cylinder clearance and the friction losses is required utilizing a dynamic analysis of the secondary motion for the high efficiency compressor. To this end, the computer program is developed for calculating the entire piston trajectory and the lubrication characteristics as functions of crank angle under compressor running conditions. The results explored the effects of some design parameters and operating conditions on the stability of the piston, the oil leakage, and friction losses.

• Korean Journal of Veterinary Research
• /
• v.51 no.4
• /
• pp.297-301
• /
• 2011

The racehorses that under arthroscopic surgery due to be injured his limbs were studied during exercise or training at Busan Race Park from 2005 to 2010. Rate of arthroscopic surgical treatments was 1.4% (63/4,642). Affected bones were radius, radial carpal bone, third carpal bone, proximal phalanx, third metacarpal bone, femur, tibia, proximal sesamoid bone and intermediate carpal bone. The lesions were fracture, chip fracture, slap fracture, osteochonrosis, and osteochondrotitis dissencans. Number of patients under arthroscopic surgery were 63. Success horses of returned to racetrack or tried to return to racetrack were 58, and 5 horses were in training or resting at the time of publication. Success horses of returned to their previous use in the patients were 49 horses (84.4%) and no returned to the racetrack were 9 horses (15.6%) in 58 horses.

• Journal for History of Mathematics
• /
• v.31 no.2
• /
• pp.93-108
• /
• 2018

In Nuri curriculum, Korean traditional culture has presented by 'Our country's plays and arts'. Games in the traditional play culture for children include ones such as tangram, top-spinning game, game of slap-match, sabangchigi. In this paper, we analyse concepts of mathematics in Korean childhood traditional plays. In detail, we show that number concepts, geometric space sense, measure calculation ability and problem-solving capability through 15 Korean traditional games.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.3
• /
• pp.94-104
• /
• 1994

In order to improve engine performance and its reliability it is very important to find the friction force between piston-ring assembly and cylinder wall in engine operating conditions. A new system was developed for the piston-ring assembly friction force measurement. This system had a relatively high fundamental frequency at 884 Hz and a fine resolution of 0.5N in friction force measurement. Comparing with existing floating liner systems this systems required small installation space and at the same time alleviated the system noise problem induced by the thrust and slap impulse forces.

• 대한관절경학회:학술대회논문집
• /
• 2009.10a
• /
• pp.183-187
• /
• 2009

Labral lesions and anatomic variants have been studied by several authors in the last decade. Buford complex and sublabral recess and foramen are most common variants. Their recognition is important in order to distinguish them from superior and anterior labral tear. We report rare normal variant of biceps anchor and superior labrum that was observed during arthroscopic surgery for SLAP lesion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.22-33
• /
• 1993

A theoretical analysis of predicting the detailed motion of a piston-crank mechanism within piston-guide clearance is presented, and the analysis is applied to the piston motion in a gasoline engine. A piston movement program is developed to calculate the piston attitude relative to the bore, the piston to bore impact velocity and kinetic energy loss and the net transverse force acting on the piston. This paper presents the formulation of a set of differential equations governing the transverse and rotational motion of a piston. These equations of motion were solved by well established Runge-Kutta method. As a result of this study, it is possible to predict the effects of piston geometry and piston pin offset on a piston motion and kinetic energy loss.