• Journal of Digital Contents Society
• /
• v.16 no.3
• /
• pp.389-395
• /
• 2015

Digital image provides many conveniences at the internet environment recently. A great number of applications, like Digital Library, Stock Image, Personal Image and Important Information, require the use of digital image. However it has fatal defect which is easy to be modified because digital image is only electronic file. Numerous digital image forgeries have become a serious problem due to the sophistication and accessibility of image editing software. Copy-Move forgery is the simplest type of forgery that involves copying portion of an image and paste it on different location within the image. There are many approaches to detect Copy-Move forgery, but all of them have their own limitations. In this paper, visual and invisible feature based forgery detection techniques are tested and analyzed. The analysis shows that pros and cons of these two techniques compensate each other. Therefore, a hybrid of visual based and invisible feature based forgery detection that combine the merits of both techniques is proposed. The experimental results show that the proposed algorithm has enhanced performance compared to individual techniques. Moreover, it provides more information about the forgery, like identifying copy and duplicate regions.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.731-746
• /
• 2011

The successful and sustainable growth of SMEs depends on their ability of strengthen their competitiveness in quality and cost and service more than anything else as a fundamental of operation. Among these key competitive factors of SMEs, quality is the most critical factor in manufacturing business fields. Because quality strongly influence cost and service performance on this manufacturing business field. There are many different ways to improve the quality performance but it needs proper management decision to choose the best way what can maximize outputs with minimum inputs. And it needs effective measurement methods and some indicators to analysis the quality performance properly. The quality cost is one of the simplest key indicators to measure the quality performance and the effectiveness of quality related management decisions. The major purpose of this study is to diagnose the categorized current level of actual quality cost of local SMEs to maximize their quality management effectiveness through comparing their level with others what's expressed in early studies. In this study, through survey on local SMEs, we found that their average annual quality cost ratio versus turnover - Total amount of annual quality cost divided by annual turnover - is around 3.69% excluded some SME's performances what have different quality control measures with others. And we found some results what corresponded with the early studies on the correlations between those categorized quality costs factors and some discrepancies between some of the literature model and the early case study results as follows. There were negative correlations between the Prevention costs and the External failure costs, and the Appraisal costs and the External failure costs, and there was positive correlation between the Appraisal costs and Internal failure costs same as early studies. But, we couldn't found any strong negative correlations between the Cost of control - Preventive costs & Appraisal costs - and the Cost of Failure of control - Internal & External failure costs -. It reveals not only the lack of effectiveness on their preventive or appraisal activities but also it can reveal there were so many effective ways to prevent the failure costs properly such as some innovative investment on Factory automation includes Error Proofing and more preventive actions to improve the effectiveness of the typical management methods likes CE (Concurrent Engineering), APQP (Advanced Product Quality Planning), FMEA (Failure Mode & Effect Analysis) etc.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.45
• /
• pp.51-82
• /
• 2010

The "rules of private international law" or "conflict of law rules" work to determine the governing law, the law applicable to international contracts. These rules permit parties' autonomy to choose the law applicable to their contracts in cases of both litigations and arbitrations. In this regards, the present article examines parties' five options for the choice of the law governing their contracts, which the parties should consider when negotiating and drafting an international agreement. This means that parties in international contracting should check the contents of the law that they are to choose as the governing law before doing so. The first option is to submit the contract to its own law, which can be the safest and simplest solution generally. However this option is subject to the consent of the other party, and is not appropriate when the domestic law chosen contains mandatory rules strongly protecting the other party. Secondly, the option of choosing the other party's law is not preferable in general. Even though the other party is strong enough to succeed in insisting on applying its own law, the other party is advised to counter-offer a neutral solution by suggesting the application of a transnational set of rules and principles of international contract, such as Unidroit Principles. The third option to choose the law of a third country should be taken with the caution that it should be harmonized with either, in case of litigations, the international jurisdiction clause which makes the country chosen have the jurisdiction over the dispute arising under the contract, or, in case of arbitrations, the way of selection of the arbitrator who has good knowledge of the law chosen. The fourth option of submitting the contract to the lex mercatoria or the general principles of law including the Unidroit Principles can be a advisable solution when a dispute is designed to be submitted to experienced arbitrators. The final and fifth is to be silent on the choice of the governing law in contracting. This option can be usefully available by experienced negotiators who are well familiar with the conflict of laws rules and enables the parties to avoid the difficulties to agree on the governing law issue and leave it open until a dispute arises.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.76-85
• /
• 1993

In order to predict the free surface signature of turbulent ship wakes two things are essential; a basic understanding of the mechanism of turbulent vortical flow/free surface interactions and a mathematical model to accurately predict the signature. The goal of the study described here is both to supplement experimental work to obtain basic understanding, as well as to condense this understanding in a model(or models) that captures the essential phenomena and thus allows predictions. To do so we followed two main paths guided by experimental observations. One is full simulations of the flow using the clavier-Stokes equations. The other is a vortex modeling, where the vortical structures of the flows are approximated by idealized structures, an the interaction assumed to be essentially inviscid. These approaches complement each other. Full simulations are only applicable to small scale phenomena, where the system is simple, and the Reynolds number is low. The vortex modeling, on the other hand, cannot represent essentially viscous aspects of the problem such as the effect of contamination gradient. Obviously, the modeling is what may eventually lead to a prediction method; the full simulations-too limited to mimic all but the simplest circumstances-are to aid and support the construction of realistic models. We address two-dimensional aspects of the vortex/free surface interaction first. Secondly we obtain some basic understanding of the interaction process through an experiment and then talk about several three-dimensional problems hoping to develop a successful prediction model.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.32-33
• /
• 2003

Mechanism of a periodic oscillation of shock-induced combustion over a two- dimensional wedges and axi-symmetric cones were investigated through a series of numerical simulations at off-attaching condition of oblique detonation waves(ODW). A same computational domain over 40 degree half-angle was considered for two-dimensional and axi-symmetric shock-induced combustion phenomena. For two-dimensional shock-induced combustion, a 2H2+02+17N2 mixture was considered at Mach number was 5.85with initial temperature 292 K and initial pressureof 12 KPa. The Rankine-Hugoniot relation has solution of attached waves at this condition. For axi-symmetric shock-induced combustion, a H2+2O2+2Ar mixture was considered at Mach number was 5.0 with initial temperature 288 K and initial pressure of 200 mmHg. The flow conditions were based on the conditions of similar experiments and numerical studies.[1, 3]Numerical simulation was carried out with a compressible fluid dynamics code with a detailed hydrogen-oxygen combustion mechanism.[4, 5] A series of calculations were carried out by changing the fluid dynamic time scale. The length wedge is varied as a simplest way of changing the fluid dynamic time scale. Result reveals that there is a chemical kinetic limit of the detached overdriven detonation wave, in addition to the theoretical limit predicted by Rankine-Hugoniot theory with equilibrium chemistry. At the off-attaching condition of ODW the shock and reaction waves still attach at a wedge as a periodically oscillating oblique shock-induced combustion, if the Rankine-Hugoniot limit of detachment isbut the chemical kinetic limit is not.Mechanism of the periodic oscillation is considered as interactions between shock and reaction waves coupled with chemical kinetic effects. There were various regimes of the periodicmotion depending on the fluid dynamic time scales. The difference between the two-dimensional and axi-symmetric simulations were distinct because the flow path is parallel and uniform behind the oblique shock waves, but is not behind the conical shock waves. The shock-induced combustion behind the conical shockwaves showed much more violent and irregular characteristics.From the investigation of characteristic chemical time, condition of the periodic instability is identified as follows; at the detaching condition of Rankine-Hugoniot theory, (1) flow residence time is smaller than the chemical characteristic time, behind the detached shock wave with heat addition, (2) flow residence time should be greater than the chemical characteristic time, behind an oblique shock wave without heat addition.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.15-21
• /
• 2011

In the range-based localization, the localization accuracy will be high dependent on the accuracy of distance measurement between two nodes. The received signal strength(RSS) is one of the simplest methods of distance measurement, and can be easily implemented in a ranging-based method. However, a RSS-based localization scheme has few problems. One problem is that the signal in the communication channel is affected by many factors such as fading, shadowing, obstacle, and etc, which makes the error of distance measurement occur and the localization accuracy of sensor node be low. The other problem is that the sensor node estimates its location for itself in most cases of the RSS-based localization schemes, which makes the sensor network life time be reduced due to the battery limit of sensor nodes. Since beacon nodes usually have more resources than sensor nodes in terms of computation ability and battery, the beacon node based localization scheme can expand the life time of the sensor network. In this paper, therefore we propose a beacon node based localization algorithm using received signal strength(RSS) and path loss calibration in order to overcome the aforementioned problems. Through simulations, we prove the efficiency of the proposed scheme.

• Journal of Korea Water Resources Association
• /
• v.39 no.5 s.166
• /
• pp.405-415
• /
• 2006

The deposition of sewer solids during dry weather in combined sewer systems results in a loss of flow capacity that may restrict flow and cause a local flooding and enhanced solids deposition. Sewer solid accumulations in drainage systems also create the 'first-flush' phenomena during wet weather runoff periods. In order to solve these problems, measurement of these loadings for a given sewer system for extended period is needed but this task is very difficult and extremely expensive. In this study, generalized procedures for estimating sewer sediment solid during dry weather in combined sewer systems developed by the U. S. Environmental Protection Agency were applied in a drainage system in Korea. As result, the appropriate equation can be selected and applied according to the available data. However, the estimated solid sediment shows considerable difference between methods which classified by model and estimation methods of variable. The estimated values using equations (1) $\sim$ (4) are greater than that of equations (5) $\sim$ (9) and intermediate models show greater values than elaborate or simplest models. The comparison between simulated and measured solid deposition is difficult due to the absent of measurement data, but this estimation method can be used usefully for the management of sewer solid with reduction of cost and effort if the measurement is carried out and the equation is adjusted according to the actual drainage systems in Korea.

• Archives of Plastic Surgery
• /
• v.34 no.2
• /
• pp.209-216
• /
• 2007

Purpose: The ischial area is by far the most common site of pressure sores found in wheel chair bound paraplegic patients, because greatest pressure is exerted from the body on this area in a sitting position. Even after a series of successful pressure sore treatments, the site is very prone to relapse by the simplest ordinary tasks of everyday life. Therefore, it is crucial to preserve the main pedicle during primary surgery. Various surgical procedures employed to treat pressure sores such as myocutaneous flap and perforator flap have been introduced. After introduction of ischial sore treatment using the inferior gluteal artery perforator (IGAP) has been made, the authors experienced favorable clinical results of patients who have undergone IGAP flap procedure in a three year time period. Methods: A total of 17 patients received IGAP flap surgery in our hospital from January 2003 to May 2006, among which 14 of them being males and 3 females. Surgery was performed on the same site again in 6(35%) patients who had originally relapsed after receiving the conventional method of pressure sore surgery. Patients' average age was 49.4(27-71) years old. Most of the patients were paraplegic(11 cases, 65%) and others were either quadriplegic(4 cases, 23%) or ambulatory(2 cases, 12%). Based on hospital records and clinical photographs, we have attempted to assess the feasibility and practicability of the IGAP flap procedure through comparative analysis of several parameters: size of defective area, treatment modalities, occurrence of relapses, complications, and postoperative treatments. Results: The average follow-up duration of 17 subjects was 25.4 months(5-42 months). All flaps survived without any necrosis. Six cases were relapsed cases from conventional surgical procedures. All of them healed well during our follow-up study. Postoperative complications such as wound dehiscence and fistula developed in some subjects, but all were well healed through secondary treatment. A total of 2 cases relapsed after surgery. Conclusion: The inferior gluteal artery perforator flap is an effective method that can be primarily applied in replacement to the conventional ischial pressure sore reconstructive surgery owing to its many advantages: ability to preserve peripheral muscle tissue, numerous possible flap designs, relatively good durability, and the low donor site morbidity rate.

• Land and Housing Review
• /
• v.4 no.3
• /
• pp.271-277
• /
• 2013

The BNWF (Beam on Nonlinear Winkler Foundation) model is one of the simplest idealizations for a pile embedded in soil as it ignores the continuity of the soil. This method is difficult to model the behavior of pile group foundation subjected to lateral loading. The limitation can be overcome with the utilization of the finite element method (FEM) or finite different method (FDM) to represent a pile element embedded in a soil medium. Both the ground and piles are modeled with soild elements. The solid elements, which do not have rotational degree of freedom, is not appropriate for modeling piles. It can be overcome by substantially increasing the number of elements, which can be prohibitive for 3D modeling. This paper used the beam element and rigid link incorporated in the OpenSees to model the pile. The accuracy of the model is validated through comparison with lateral load test and BNWF analysis. It is shown that the method can capture the measured behavior accurately. It is therefore recommended to be used in group pile analyses.

• Journal of Fashion Business
• /
• v.19 no.2
• /
• pp.53-68
• /
• 2015

The Beijing Opera is one of the leading representatives of Chinese culture, which includes literature, music, dance, martial arts, and a type of performance that stems from the Chinese cultural history that is still relevant today. The purpose of this study is to develop fashion-cultural products from the Lian Pu of the Beijing Opera, a Chinese cultural tradition that receives abundant positive feedback from around the world, showing its value in both academic and practical fields. This study was carried out first as a theoretical study of the literature, definition and types of facial make up used in the Opera, as a way of examining the formative aspect. Secondly, an analysis was conducted on the main characters, 'Guan Yu' and 'Zhang Fei' of "The Romance of the Three Kingdoms", 'Li Kiu' and 'Lu Zhishen' of "All Men are Brothers" and 'Monkey King' of "Journey to West", employing the collection belonging to 'Yongqi Zhao' who is an expert on the Chinese Beijing Opera. Thirdly, two concepts were categorized, based on the analytic results of the abovementioned characters, each of which were then further categorized into three sub concepts. In regard to cultural development designs, the results of an analysis on the facial make-up color, form, and texture of the four main characters were utilized to construct the themes, "Modern Chic" and "Traditional Splendor". The simplest form that has been represented in the four figures has been applied to "Modern Chic" to show a modern image in which black, white and light blue has been used alongside the vivid red, which is a Chinese favorite, to highlight the characters. In "Traditional Splendor", which is focused on the stage art of the Opera, we see more artistic traditions and colors, to further appeal to our emotions. Traditional motifs have been applied using traditional Chinese arts, in order to develop strong and brilliant colors. The two styles of cultural products were developed in the form of women's scarves and men's ties; a total of 24 designs were expressed, using Illustrator CS6. In the final step, 4 scarves and 6 ties were produced as a sample, using high quality silk. The development of these cultural fashion products will bring an opportunity to show how Chinese traditional culture can be widely utilized in commercial market design.