• KIEAE Journal
• /
• v.16 no.2
• /
• pp.17-22
• /
• 2016

Purpose: Sensitivity analysis offers a good guideline for designing energy conscious buildings, which is fitted to a specific building configuration. Sensitivity analysis is, however, still too expensive to be a part of regular design process. The One-at-a-time (OAT) is the most common and simplest sensitivity analysis method. This study aims to propose a reasonable ground that the OAT can be an alternative method for the variance-based method in some early design scenarios, while the variance-based method is known adequate for dealing with nonlinear response and the effect of interactions between input variables, which are most cases in building energy simulations. Method: A test model representing the early design phase is built in the DOE2 energy simulations. Then sensitivity ranks between the OAT and the Variance-based methods are compared at three U.S. sites. Result: Parameters in the upper rank by the OAT do not much differ from those by the Main effect index. Considering design practices that designers would chose the most energy saving design option first, this rank similarity between two methods seems to be acceptable in the early design phase.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.606-613
• /
• 2002

In this paper we applied a transmit beamforming technique to the underwater acoustic communication system for high rate data transmission. A prototype transmit system was designed and implemented with the general purpose DSP processor and multiple digital-to-analog converters. The performances of the implemented system were evaluated by the experiment in water tank. In order to simplify the procedure the channel coding and equalizer were omitted. And the simplest OOK (On-Off Keying) technique in digital communication methods was applied. The experimental result shows that the transmission data rate is higher about 3 times in the case of 5 hydrophone transmitting may than 1 hydrophone transmitter at bit error rate 10/sup -2/. We verified that the maximum data rate was 400 bps for speech signal transmission in water tank.

• Clean Technology
• /
• v.4 no.1
• /
• pp.60-67
• /
• 1998

As workers' health and welfare are becoming increasingly important, there are needs for protecting workers from being exposed to dust particles in workplace. One of the simplest ways to protect workers is to wear a one-time-use mask of the 3M type. Although conventional masks are convenient to use, they provide low filtration efficiency simply because of air leaks through interface between the face and the mask. In this study, a new type of mask is developed and tested. The air which is filtered first using high efficiency particulate air(HEPA) filter is supplied to the nose area of workers' face. The developed mask was tested for filtration efficiency and for workers' acceptance. Very good results were obtained for both accounts.

• Corrosion Science and Technology
• /
• v.9 no.5
• /
• pp.175-186
• /
• 2010

The auto industry is demanding more ductile high-strength steel grades to build lighter and stronger car bodies. The hot-dip galvanizing problems of these new steel grades are creating a demand for an improved method to control zinc wettability. The simplest way to improve zinc wettability on industrial hot-dip galvanizing lines is to increase the strip immersion temperature at zinc bath entry for enhancing the aluminothermic reaction. However, this practice increases the reactivity due to overheating the zinc in the snout which induces the formation of brittle Fe-Zn compounds at the strip/coating interface with the formation of higher amounts of dross in the zinc bath and snout contamination. Thus, this simple practice can only be utilized for short production periods of one to two hours without deteriorating coating quality. This problem has been solved by employing a technique that allows the use of a higher and attuned strip immersion temperature at zinc bath entry while still maintaining a constantly low zinc bath temperature. This has been proven to provide the solution for both the improved wettability and a significant reduction in the amounts of dross in the zinc bath.

• Journal of Powder Materials
• /
• v.23 no.6
• /
• pp.442-446
• /
• 2016

The sol-gel method is the simplest method for synthesizing monodispersed silica particles. The purpose of this study is to synthesize uniform, monodisperse spherical silica nanoparticles using tetraethylorthosilicate (TEOS) as the silica precursor, ethanol, and deionized water in the presence of ammonia as a catalyst. The reaction time and temperature and the concentration of the reactants are controlled to investigate the effect of the reaction parameters on the size of the synthesized particles. The size and morphology of the obtained silica particles are investigated using transmission electron microscopy and particle size analysis. The results show that monodispersed silica particles over a size range of 54-504 nm are successfully synthesized by the sol-gel method without using any additional process. The nanosized silica particles can be synthesized at higher TEOS/$H_2O$ ratios, lower ammonia concentrations, and especially, higher reaction temperatures.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.3
• /
• pp.178-183
• /
• 2006

A Blu-ray disc, which has a more than 25GB optical capacity, has been known as a promising next-generation optical disc format. It commonly has a 1.1 mm thick substrate and a 0.1 mm thick cover layer for beam transmitting and the protection of the reflecting surface. The cover layer is generally formed by the spin coating process. However, in conventional spin coating, small bumps are formed along the rim of the disc, which results in the fatal reading error. Numerical simulation of the thin film flow behaviors during spin coating with the commercial solver and optimal spinning conditions was obtained. Thickness distribution of the cover layer according to the variation of substrate's edge shape could be calculated as well. By modifying the shape of the substrate edge shape, the bumps along the disc rim could be minimized, and it was proved that the chamfered edge, around $5{\sim}10$ degree, is the simplest and most effective way to minimize the bumps.

• Journal of Korean Public Health Nursing
• /
• v.22 no.1
• /
• pp.121-130
• /
• 2008

Purpose: Immunization is one of the simplest and most effective approaches for protecting the health of children from preventable infectious disease. This study assessed the immunization statuses of children presenting to childcare centers in Korea and compared the sociodemographic factors of children with age-appropriate immunization for DTaP4 with those with delayed immunization for DTaP4. Method: A national mail survey was used to collect data on the children's immunization history and sociodemographic information. A total of 248 mothers returned completed questionnaires for their children. Results: The overall immunization coverage for HepB, a series of DTaP and polio and varicella was above 95%. However, the percentage of age-appropriate immunizations of vaccines ranged from 45.3% to 69.0% depending on the vaccines. Only the age of the child was a significant factor for delayed immunization for DTaP4. Conclusion: To fully protect children from vaccine-preventable disease, childcare providers can playa role in monitoring the immunization statuses of children in their care centers to ensure that they all receive all childhood immunizations on time.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.4
• /
• pp.1067-1074
• /
• 2016

A start-up demonstration test is a mechanism that is usually used to determine the reliability of equipment, for example water pumps, car batteries and power generators. The simplest and oldest start-up demonstration tests are called CS (consecutive successes) which have been studied by Hahn and Gage (1983), Viveros and Balakrishnan (1993).At first Hahn and Gage (1983) discussed the start-up demonstration test. I was based on i.i.d (independently and identically distributed) binary outcomes with the specified number of consecutive successful start-ups. Oh (2016) studied CSNCF (consecutive successful, but not consecutive failures). In this paper, we investigated the CS and CSNCF models, also their applications to start-up demonstration tests. The numerical results showed that the expectations and variances of the total number of attempted start-ups until the acceptance of the unit are gradually increasing in all of the specified number of successes as the p (probability of a successful start-up in an single trial) decreases from 0.99 to 0.90. The difference between means of the CS mode and CSNCF model is small, but variances of the CS and CSNCF are big.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.433-446
• /
• 2009

Pharmaceuticals in the aquatic environment are trace contaminants of growing importance in environmental health due to their physiologically active nature. Pharmaceuticals could affect non-target species and might eventually damage sustainability of susceptible populations in the ecosystem. Potentials for health consequences among susceptible human population cannot be ruled out since long-term exposure to cocktails of pharmaceuticals, which might be present in drinking water, is possible. Selection of antibiotic resistant microorganisms is of another concern. In order to understand, and if needed, to properly address the environmental health issues of pharmaceutical residues, knowledge gaps need to be filled. Knowledge gaps exist in many important areas such as prioritization of target pharmaceuticals for further risk studies, occurrence patterns in different environments, chronic toxicities, and toxicities of pharmaceutical mixtures. Appropriate treatment technologies for drinking water and wastewater could be developed when they are deemed necessary. One of the simplest, yet most efficient measures that could be undertaken is to implement a return program for unused or expired drugs. In addition, implementation of environmental risk assessment frameworks for pharmaceuticals would make it possible to efficiently manage potential environmental health problems associated with pharmaceutical residues in the environment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.9
• /
• pp.1290-1306
• /
• 1998

An experimental study has been performed on a three-dimensional boundary layer over a rotating disk with an impinging jet at the center of the disk. The objective of the present study is to investigate the turbulence statistics of the three-dimensional turbulent boundary layer, which may be regarded as one of the simplest models for the flow in turbomachinery. Six components of the Reynolds stresses and ten triple products are measured by aligning the miniature X-wire probe to the mean velocity direction. The ratio of the wall-parallel shear stress magnitude to twice the turbulent kinetic energy in the near-wall region is strongly decreased by the impinging jet. In the case of the free rotating disk flow the shear stress vector lags behind the mean velocity gradient vector in the whole boundary layer, while the lag is weakened as the impinging jet speed increases.