• 대한수학회논문집
• /
• 제16권4호
• /
• pp.595-606
• /
• 2001

Using p-adic class number formula, we derive a congru-ence relation for class numbers of the simplest cubic fields which can be considered as a cubic analogue of Ankeny-Artin-Chowlas theo-rem, Furthermore, we give an elementary proof for an upper bound for the class numbers of the simplest cubic fields.

• Wind and Structures
• /
• 제1권3호
• /
• pp.271-284
• /
• 1998

This paper uses the numerical simulation to investigate the interference effect of 3-D turbulent flow around two high rise buildings in proximity at the different relative heights, gaps, and wind velocities. The computer program used to carry out the simulation is based on the control volume method and the SIMPLEST algorithm. The ${\kappa}-{\varepsilon}$ model was used to simulate turbulence effects. Since the contracted flow between two adjacent buildings enhances the strength of vortex shedding from the object building, the pressure coefficient on each side wall of the object building is generally increased by the presence of apposed building. The effect is increased as the relative height or the gap between the two buildings decreases. The velocity on the vertical center line between two buildings is about 1.4 to 1.5 times the upstream wind velocity.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 춘계학술대회논문집
• /
• pp.212-217
• /
• 1996

This study investigated whether consumer's characteristics affect their preference of size labeling systems. The survey included 443 women 20 to 64 years of age. The results show that the consumers' preferences of five size labeling systems were different significantly. Subjects strongly prefered the size label in use for many years at the marker. The consumers' preference for various systems was different by resident area, educational level, and body types of the subjects. The system with information on body measrements was prefered by the resident in the metro city area than the resident in the small city. The simplest system was strongly prefered by the subjects having no difficulties on purchasing ready-to-wear garments that reasonably fit their bodies. The subjects belonged to the low educational level strongly prefered the simplest system.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.117-124
• /
• 2012

본 논문에서는 cycle-4를 쉽게 피하고 가변 부호율과 길이로 접근할 수 있게 하는 순환 치환 행렬(CPM; circulant permutation matrix)을 토대로 한 간단한 패리티 검사 행렬의 구성 방법을 제안한다. 결과적으로 부행렬 연산은 여러 CPM들의 곱셈으로 처리될 수 있으며 LDPC 부호화 계산은 매우 간단하게 수행된다. 또한 LDPC 부호의 고속 부호화 문제를 고려한다. 제안한 설계는 정규, 비정규 LDPC 부호 둘 다를 위한 간단한 행렬 연산에 근거한 고속 부호화를 가능하게 한다.

• 한국IT서비스학회지
• /
• 제6권1호
• /
• pp.47-63
• /
• 2007

A lot of researchers have been interested in the factors influencing the use of mobile phone services. Most of the previous studies, however, verified only the research models developed by the authors. They did not consider which model agrees better with the real situation. This study presents six alternative models based on various previous studies, and compares the data fitness of the models. A Web survey of mobile phone users collected 2,217 cases. Statistical analyses, using SEM (Structural Equation Modeling), show that the fitness of the simplest alternative model is better than that of any other model. The simplest model has no causal relationship among exogenous factors, and proposes that all of exogenous factors have direct impacts on the customer satisfaction. In addition, the analyses say that corporate and brand image and additional service are more important than the other exogenous factors such as communication quality.

• 한국광과학회:학술대회논문집
• /
• 한국광과학회 2006년도 정기총회 및 제13회 학술대회 논문 초록
• /
• pp.32-32
• /
• 2006

• 한국표면공학회지
• /
• 제16권4호
• /
• pp.199-214
• /
• 1983

Up to this date, numerous methods of analysis of electroplating solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelope countries, technicians of electoplating shops are most high school gradutes or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equiIJment. Therefore, in this paper the simplest, besides accurate method is investigated after comparing nu.merous methods published. Among the methods of 'copper determinations from acid and alkaline copper plating baths, EDT A titration method are chosen, due to these methods are the simplest and fastest for the evaluation of metal content, without requiring any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of .indicators androther metal's coexsistence as well as solution comIJonent, many difficulties were encountered from cyanide' copper, on the contrary of acid copper bath. PAN, PV, and MX indicators were tried, but it is found that MX is the best. In cyanide solution, due to cyanide is the masking reagent, elimination of this component is essential, and finally found that elimination eN- by precipitation with AgN03 solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method from time to time, before chelate titration by means of AgN03 precipitation. Always some constant deviatioJ;ls will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.

• 대한수학회보
• /
• 제37권3호
• /
• pp.519-536
• /
• 2000

We construct a stationary, properly ordered Bratteli diagram B=(V,E,$\geq$) so that its Vershik map is isomorphic to Chacon's homeomorphism. It is the simplest stationary, properly ordered Bratteli diagram isomorphic to (Xc, Tc). We also find a primitive and proper substitution of Chacon's transformation.

• 한국자기공명학회:학술대회논문집
• /
• 한국자기공명학회 2000년도 제17회 학술발표회
• /
• pp.40-40
• /
• 2000

• Advances in aircraft and spacecraft science
• /
• 제6권2호
• /
• pp.105-116
• /
• 2019

An alternative to the multilayered preforming is to use structures reinforced through-the-thickness in order to manufacture thicker and more complex pieces. Stitching technology is developed to bind dry reinforcements together or to strengthen composites in thickness performance by inserting structural yarns. Tufting process represents the simplest one-sided sewing technology and it is specifically designed for dry preform/liquid composite molding process route. Currently, the tufting technology is getting more and more interest due to its simplest and efficient process where it involves the insertion of binder threads via a single needle through the fabric. This technique of reinforcement through-the-thickness requires only one access to the preform which makes it suitable for three-dimensional structures and complex shaped textile composites. This paper aims to improve the understanding of the mechanical performance of tufted structures. An experimental study was developed, which included tensile and bending behaviours of tufted and un-tufted preforms, in order to evaluate the effect of tufting on the mechanical performance of dry preforms. The influence of the process parameters (tufting density, loop length, tufting yarns${\ldots}$) on the mechanical performance ofthe final structure is also highlighted.