• 한국전자통신학회논문지
• /
• 제10권10호
• /
• pp.1079-1086
• /
• 2015

본 논문은 안전 무결성 레벨이 4(: Safety Integrity Level 4)인 안전 관련 시스템에 적합한 출력 모듈의 구조를 설계하였고, 설계된 출력 모듈에 요구되는 정량적 목표치의 수준을 제시하였다. 특히 다양한 출력 방식 중에서 릴레이 출력 신호와 아날로그 신호로 구성된 출력 모듈이 안전 기능을 수행하는 시스템의 구성 요소인 경우를 적용하였다. 분석 방법은 FMEA(: Failure Modes and Effect Analysis), FTA(: Fault Tree Analysis) 방식을 이용하였다. 그 결과로 철도 응용 규격인 IEC 62425의 요구사항을 준수하는 SIL4 안전 관련 시스템의 출력 모듈의 구조와 고장빈도인 정량적 목표치를 제시하였다.

• 산업공학
• /
• 제25권4호
• /
• pp.422-430
• /
• 2012

In this article, we introduced the estimation method by 'Safety Integrity Level'(SIL) for the criterion of safety assurance and performed a case study on a flame scanner. SIL requires probabilistic evaluation of each set of equipment used to reduce risk in a safety related system. FMEDA(Failure Modes, Effects and Diagnostic Analysis) method is widely used to evaluate the safety levels and provides information on the failure rates and failure mode distributions necessary to calculate a diagnostic coverage factor for a part or a component. Basically, two parameters resulting from FMEDA are used for SIL classification of the device : SFF(Safe Failure Fraction) and PFD(Probability of Failure on Demand). In this case study, it is concluded that the flame scanner is designed to fulfill the condition of SIL 3 in the aspect of SFF and PFD.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.19-22
• /
• 2008

For the assembly and evaluation of solid immersion lens (SIL) optical head which is the key component of SIL based near field recording (NFR) technology, we modify the Twyman-Green interferometer. Super-hemisphere SIL optical head for the surface recording is assembled and evaluated by the modified Twyman-Green interferometer. In order to verify the optical performance of the assembled SIL optical head, we compare the measured results of the SIL optical head with the simulation ones. Finally, we show the feasibility of applying the assembled SIL optical head to near field recording system by the experiment of the dynamic gap control based on test bed.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권3호
• /
• pp.231-237
• /
• 2016

Purpose: It is not easy to suggest a quantitative data related to safety analysis. The objective of this paper is to propose a method of Safety Integrity Level (SIL) analysis and to suggest a SIL analysis result for single station controller in nuclear power plant based on IEC 61508. Methods: The Failure Modes and Effects Diagnostic Analysis (FMEDA) and average probability of failure on demand (PFD) are used for SIL assessment. Results: A SIL of single station controller is evaluated 4 by a reliability analysis results and PFD. Conclusion: A SIL analysis method and result for single station controller based on IEC 61508 are proposed in this paper. It can applicable for a manufacturer data in safety-related system.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.156-163
• /
• 2016

There exists required safety integrity level (SIL) to assure safety in accordance with international standards for every electrical / electronics / control equipment or systems with safety related functions. The SIL is allocated from lowest level (level 0) to highest level (level 4). In order to guarantee certain safety level that is internationally acceptable, application of methodology for SIL allocation and demonstration based on related international standards is required. However, the theoretical and practical study for safety integrity level is barely under way in the domestic railway industry. This research studied not only the global process of SIL allocation to guarantee safety in accordance with international standards for safety related equipment and system, but the quantitative methodology based on international standard and the semi-quantitative methodology as alternative way for SIL allocation. Specifically, the systematic SIL allocation for platform screen door system of railway is studied applying the semi-quantitative methodology in order to save much time and effort compared to quantitative method.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.740-742
• /
• 2017

교통안전공단이 운전자 400명을 대상을 졸음운전 실태를 조사한 결과 최근 1주일간 10명 중 4명이 졸음운전을 경험했으며, 그 중 19%는 사고가 날 뻔한 '아차사고' 경험이 있는 것으로 나타났다고 밝혔다. 이에 따라 운전자들의 졸음운전을 예방하기 위한 시스템의 존재가 시급하다는 것을 알 수 있다. 이에 본 논문에서는 운전자의 졸음운전 사고를 예방하기 위한 운전 방지 기법을 제시한다.

• 한국농촌건축학회논문집
• /
• 제15권4호
• /
• pp.35-42
• /
• 2013

The study aims to investigate general characteristics of Jae-sil from an architectural perspective by grasping location, deployment, structure, and plan composition based on existing inhabited conditions in Jeollabukdo. Results derived from the study are as follows. First, the location of Jae-sil is classified into mountainous and village types, and the two types showed a similar distribution. The village type showed the most distribution in the foot of a mountain in the rear of village, while the mountainous type is close to graveyard. The Jae-sil were mostly exposed to south, southeast, and southeast, which was not significantly different from residence. For deployment of the Jae-sil, a "二" shaped house, where main quarter and gated building are parallel located, can be common, indicating that additional attached building is less required. Second, for the platform out of structural components, coursed masonry was conducted by using natural rocks, and placed were a prop on the platform, first line on processed foot stone, and others on natural foot stone. For pillar, front line round columns, while others square columns. The binding type of the upper part of pillar is dominated by jangyeosujang and sorosujang. For wooden frame structure, 5ryangs were the most distributed, and out of these, 1goju 5ryang was the most generally used. For a roof part, it was composed with gambrel roof with single eave, and the roof was constructed by placing traditional Korean tile roof on the top. Third, for a size of Jae-sil out of plan composition, although the facade and the side of it were presented in a diverse manner, 4 facade rooms and 1.5 side rooms were the most frequently presented, and all Jae-sil were equipped with front ceremonial space. For spatial composition of Jae-sil, main floored hall is placed at the center, and each room is placed on the left and right side to secure space for ancestral rite for participants of it, and for a house with 5 rooms or more, it shows that main floored hall and rooms are weighted from side to side.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1995년도 추계 학술발표회
• /
• pp.11-11
• /
• 1995

• 한국안전학회지
• /
• 제30권6호
• /
• pp.164-173
• /
• 2015

There exists required safety integrity level (SIL) to assure safety in accordance with international standards for every electrical / electronics / control equipment or systems with safety related functions. The SIL is allocated from lowest level (level 0) to highest level (level 4). In order to guarantee certain safety level that is internationally acceptable, application of methodology for SIL allocation and demonstration based on related international standards is required. However, application standard differs from every industry in domestic or international for application on mythology for allocation and demonstration of SIL. Application or assessment is not easy since absence on clear criteria or common definition. This research studied not only fundamental concept of SIL required to guarantee safety in accordance with international standards for safety related equipment and system, but different types of methodologies for SIL allocation. Specifically, SIL allocation for Platform Screen Door system of railway is studied applying methodology of severity of accidents and risk graph among different methodologies for SIL allocation.

• 한국균학회지
• /
• 제36권2호
• /
• pp.189-195
• /
• 2008

Aspergillus nidulans는 빛이 없는 조건에서는 유성분화가 주로 일어나고 빛이 있는 조건에서는 유성분화가 억제되고 대신 무성분화가 유도된다. 빛에 의해서 유성분화가 억제되는 것은 빛에 반응하여 유성 또는 무성분화를 조절하는 유전자가 있다는 것을 시사한다. 따라서 빛에 의해서 조절되는 유전자를 연구하기 위하여 광 조건하에서 유성분화를 하는 silA98 돌연변이를 분리하였으며, 이를 보완하는 유전자를 분리 및 분석하고자 A. nidulans의 AMA-NotI genomic library로부터 silA98 돌연변이를 상보하는 유전자 silA를 분리하였다. silA 유전자의 예상 ORF는 2,388 bp의 염기로 구성되어지고 795개의 아미노산을 암호화하고 있었다. 이 유전자는 Saccharomyces cerevisiae의 ARO80 유전자와 상동성을 보이며 SilA 단백질의 N 말단에는 약 51.9%의 상동성을 가지는 ${Zn_2}{Cys_6}$ motif를 지니고 있었다. silA 유전자 결손돌연변이주는 광 존재 하에서뿐만 아니라 고농도의 sorbitol에서도 유성분화가 유도되었다. 이는 silA 유전자가 빛과 고삼투 조건에서 유성분화를 억제하는 조절과정에 관여하고 있음을 의미한다. silA 유전자를 niiA promoter로 과다 발현시켰을 때의 형질은 야생형과 큰 차이를 보이지 않았다.