• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.496-500
• /
• 1997

This paper describes an automated system for analyzing the stress intensity factors(SIFs) of three-dimensional (3D) cracks. A geometry model, i.e.a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated by the bucketing method, and ten-noded quadratic tetrahedral solid elements are generated by the Delauuay triangulation techniques. The singular elements such that the mid-point nodes near crack fornt are shifted at the quarter-points are automatically placed along the 3D crack front. THe complete finite element (FE) model generated, i.e the mesh with material properties and boundary conditions is given to one of the commercial FE codes, and a stress analysis is performed. The SIFs are calculated using the displacement extrapolation method. To demonstrate practical performance of the present system, a semi- elliptical surface crack in a plate subjected to tension is solved.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.2
• /
• pp.119-123
• /
• 2005

This paper describes a fuzzy-based system for analyzing the stress intensity factors (SIFs) of three-dimensional (3D) cracks. 3D finite element method(FEM) was used to obtain the SIF for subsurface cracks and surface cracks existing in inhomogeneous materials. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy theory. Nodes are generated by the bucketing method, and ten-noded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. The singular elements such that the mid-point nodes near crack front are shifted at the quarter-points, and these are automatically placed along the 3D crack front. The complete FE model is generated, and a stress analysis is performed. The SIFs are calculated using the displacement extrapolation method. The results were compared with those surface cracks in homogeneous materials. Also, this system is applied to analyze cladding effect of surface cracks in inhomogeneous materials.

• Journal of Sasang Constitutional Medicine
• /
• v.27 no.1
• /
• pp.71-81
• /
• 2015

Objectives This research was proposed to present clinical practice guideline (CPG) for Taeyangin Disease of Sasang Constitutional Medicine (SCM). This CPG was developed by the national-wide experts committee consisting of SCM professors. Methods This guideline was performed that search and collection of literature related SCM such as "Dongeuisusebowon", textbook of SCM, clinical guidebook of SCM and fundamental research to standardize diagnosis of Sasang Constitutional Medicine. Journal search related clinical trial or human complementary medicine of SCM was performed domestic and overseas. Finally, 1 article was selected and included in CPG for Taeyangin disease. Results & Conclusions The CPG of Taeyangin disease include classification, definition and standard symptoms of each pattern. Taeyangin disease is classified into exterior-origin lower back (EOLB) disease and interior-origin small intestine (IOSI) disease by region of symptom. EOLB can be replaced with Oegam-yocheok and IOSI can be replaced with Naechok-sojang that is Korean pronuncation. EOLB disease is classified into lower back favorable symptomatology (LBFS) and lower back unfavorable symptomatology (LBUS). Lower back is to say Yocheok, so LBFS can be called Yocheok favorable symptomatology and LBUS can be called Yocheok unfavorable symptomatology. LBUS is to say paraparesis symptomatology or Haeyeok, that is Korean pronunciation, symptomatology. IOSI disease is classified into small intestine favorable symptomatology (SIFS) and small intestine unfavorable symptomatology (SIUS). Small intestine is to say Sojang, so SIFS can be called Sojang favorable symptomatology and SIUS can be called Sojang unfavorable symptomatology. SIUS is to say regurgitation symptomatology or Yeolgeok, that is Korean pronunciation, symptomatology.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.981-989
• /
• 1995

A new weight function approach to determine SIF(stress intensity factor) using single-layer potential has been presented. The crack surface displacement field was represented by one boundary integral term whose kernel was modified from Kelvin's fundamental solution. The proposed method enables the calculation of SIF using only one SIF solution without any modification for the crack geometries symmetric in two-dimensional plane such as a center crack in a plate with or without an internal hole, double edge cracks, circumferential crack or radial cracks in a pipe. The application procedure to those crack problems is very simple and straightforward with only one SIF solution. The necessary information in the analysis is two reference SIFs. The analysis results using present closed-form solution were in good agreement with those of the literature.

• Journal of Mechanical Science and Technology
• /
• v.17 no.8
• /
• pp.1120-1132
• /
• 2003

A problem of a circular elastic inhomogeneity interacting with a crack under uniform loadings (mechanical tension and heat flux at infinity) is solved. The singular. integral equations for edge and temperature dislocation distribution functions are constructed and solved numeric-ally, to obtain the stress intensity factors. The effects of the material property ratio on the stress intensity factor (SIF) are investigated. The computed SIFs are used to predict the kink angle of the crack when the crack grows.

• Structural Engineering and Mechanics
• /
• v.34 no.1
• /
• pp.85-95
• /
• 2010

In this paper, numerical solution of the singular integral equation for the multiple curved branch-cracks is investigated. If some quadrature rule is used, one difficult point in the problem is to balance the number of unknowns and equations in the solution. This difficult point was overcome by taking the following steps: (a) to place a point dislocation at the intersecting point of branches, (b) to use the curve length method to covert the integral on the curve to an integral on the real axis, (c) to use the semi-open quadrature rule in the integration. After taking these steps, the number of the unknowns is equal to the number of the resulting algebraic equations. This is a particular advantage of the suggested method. In addition, accurate results for the stress intensity factors (SIFs) at crack tips have been found in a numerical example. Finally, several numerical examples are given to illustrate the efficiency of the method presented.

• Structural Engineering and Mechanics
• /
• v.70 no.3
• /
• pp.279-287
• /
• 2019

This paper intends to introduce a near-tip grid refinement and to explore its usefulness in the crack analysis by the natural element method (NEM). As a sort of local h-refinement in FEM, a NEM grid is locally refined around the crack tip showing the high stress singularity. This local grid refinement is completed in two steps in which grid points are added and Delaunay triangles sharing the crack tip node are divided. A plane-state plate with symmetric edge cracks is simulated to validate the proposed local grid refinement and to examine its usefulness in the crack analysis. The crack analysis is also simulated using a uniform NEM grid for the sake of comparison. The near-tip stress distributions and SIFs that are obtained using a near-tip refined NEM grid are compared with the exact values and those obtained using uniform NEM grid. The convergence rates of global relative error to the total number of grid points between the refined and non-refined NEM grids are also compared.

• Annual Conference of KIPS
• /
• 2024.05a
• /
• pp.133-136
• /
• 2024

전 산업에서 초고속 저지연 데이터 서비스 수요가 증가하면서 저지연 트래픽 (low latency traffic, LLT) 처리 중요성이 커지고 있다. 기존 연구들은 LLT 에 우선순위를 부여하여 먼저 처리하는 프리 엠프션 기법을 제안했으나 제어 오버헤드가 증가하거나 non-LLT 트래픽 성능을 열화하는 문제를 해결할 수 없었다. 본 논문에서는 이러한 문제를 해결하기 위해 종래에 사용하지 않았던 짧은 인터프레임 스페이스 (Short Interframe Space, SIFS)를 LLT 에 활용하는 새로운 전송 기법을 제안한다. 본 논문에서는 수치 분석을 통해 제안하는 인터프레임 스페이스 통신 (Interframe Space Communication, ISC)이 종래의 전송 방법 대비 스루풋을 평균 50% 개선하고 지연도를 98% 개선할 수 있음을 보였다.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2292-2306
• /
• 2024

This study addresses cracks and fracture problems in engineering structures that may cause significant challenges and safety concerns, with a focus on pressure vessels in nuclear power plants. Comprehensive parametric three-dimensional mixed mode fracture analyses for inclined and deflected nozzle corner cracks with various crack shape aspect ratios and depth ratios in nuclear reactor pressure vessels are carried out. Stress intensity factor (SIF) solutions are obtained using FRAC3D, which is part of Fracture and Crack Propagation Analysis System (FCPAS), employing enriched finite elements along the crack front. Also, improved empirical equations are developed to allow the determination of mixed mode SIFs, K_I, K_II, and K_III, for any values of the parameters considered in the study. This study provides practical solutions to assess the remaining life and fail-safe conditions of nuclear reactors by providing accurate SIF determination.

• Structural Engineering and Mechanics
• /
• v.61 no.3
• /
• pp.371-379
• /
• 2017

Modelling of a crack propagating through a finite element mesh under mixed mode conditions is of prime importance in fracture mechanics. In this paper, two crack growth criteria and the respective crack paths prediction in functionally graded materials (FGM) are compared. The maximum tangential stress criterion (${\sigma}_{\theta}-criterion$) and the minimum strain energy density criterion (S-criterion) are investigated using advanced finite element technique. Using Ansys Parametric Design Language (APDL), the variation continues in the material properties are incorporated into the model by specifying the material parameters at the centroid of each finite element. In this paper, the displacement extrapolation technique (DET) proposed for homogeneous materials is modified and investigated, to obtain the stress intensity factors (SIFs) at crack-tip in FGMs. Several examples are modeled to evaluate the accuracy and effectiveness of the combined procedure. The effect of the defects on the crack propagation in FGMs was highlighted.