• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.176-197
• /
• 1962

Seasonal variations of chemical constituents of estuarine water at a definite station of the tidal flat in Guang Yang inlet have been determined for two days a month. The range and mean of the annual variations are as follows:Tidal variations through a year are as follows:1. Although the tidal value of pH is almost constant during one tidal cycle, it raises abruptly 0.1-0.2 intervals of pH value during the first period of flood.2. The lower values of chlorinity, magnesium and calcium contents have been determined the nearer the slack after ebb, and slightly higher during the first period of flood tide than the last of ebb. The tidal change of calcium contents is more remarkable than of magnesium.3. The higher per cent saturation values of dissolved oxygen, sometimes higher than 100 per cent, re determined the nearer the slack after ebb.4. The total nitrogen contents, relatively poor, varies accidentally during one tidal cycle, whereas phosphate-P and silicate-Si are rich at the slack after ebb and increase proportionally to the mixing percentage of fresh water. The average values, 52.2 and 18.5 of Si/P and N/P are greater than of the normal.5. The acid soluble iron contents, lower in winter than in summer, is also varies accidentally during one tidal cycle and the magnitude of the variation is large.6. The chemical composition considered from the value of Ca/Cl or Mg/Cl of estuarine water varies according to the chlorinity even at the high chlorinity of 18-19%.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2009

This study was carried out to evaluate the Life Cycle Cost(LCC) of three types of RTPV(Building Integrated Photovoltaic) systems-Glass plus Granite. Crystalline BIPV and See through Amorphous BIPV-which were vertically installed to generate the same power output(76 kW level). Initial investment costs. cost. savings and maintenance costs had been predicted during the period of analysing the LCC of three types of BIPV(Building Integrated Photovoltaic) systems installed for the purpose of evaluating the LCC. In case of cost savings, it had been analyzed by measuring the amount of electric power generated, reduction in lighting load and heat & cooling loads through simulation. From this analysis, it was predicted that the See-through amorphous BIPV offering cost saving advantages demonstrated the economical efficiency similar to the Class plus Granite when it is backed by more than 20 years of durability.

• Korean Journal of Metals and Materials
• /
• v.50 no.7
• /
• pp.517-522
• /
• 2012

In this study, a super carburizing treatment was applied to improve roller pitting fatigue life. It produced excellent properties of surface hardness and temper softening resistance by forming precipitation of fine and spherodized carbides on a tempered marstensite matrix through the repeated process of carburization and diffusion after high temperature carburizing step 1. The cycle II performed two times carburizing/diffusion cycle (process) after super carburization at $1,000^{\circ}C$ had fine and spherodized carbides to subsurface $200{\mu}m$. In this case, the carbide was $(Fe,Cr)_3C$ and there was not any massive carbides. In the case of Cycle II, the roller pitting fatigue life had a 6.15 million cycles. It was improved 48% compared to normal gas carburizing treatment.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.1
• /
• pp.56-66
• /
• 2017

In this experimental study, it is designed and used the test engine bed which is installed with the exhaust gas recirculation, and in addition to equipped using by oxygen adder. It has been tested and analyzed the combustion and emission characteristics, cycle variability and engine performance by controlling the oxygen volume fraction, EGR rate, engine speed and equivalence ratio.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.58-71
• /
• 1996

A model which calculates the hydrocarbon emissions from spark ignition engines is presented The model contains the formation of HC emissions due to both crevices around piston ring top land and oil films on the cylinder wall. The model also considers in-cylinder oxidation and exhaust port oxidation of desorbed HC from crevices and oil films after combustion process. The HC emissions model utilizes the results of SI engine cycle simulation. The model predicts well the trends of HC emissions from the engines when varying engine parameters.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.4
• /
• pp.155-163
• /
• 2019

Mixture electrodes of a graphite having a good cycle performance and a silicon monoxide (SiO) having a high capacity are fabricated and their cycle performances are evaluated as negative electrodes for lithium-ion batteries. The electrode prepared by mixing the natural graphite and carbon-coated SiO in a mass ratio of 9:1 shows a reversible capacity of $480mAh\;g^{-1}$, 33% higher than that of graphite. However, the capacity deteriorates continuously upon cycling due to the volume change of silicon monoxide. In this study, the factors that can improve the cycle performance have been discussed through the change in the configurations of the electrode and the electrolyte. The electrode using the carboxymethyl cellulose (CMC) binder shows the best cycle performance compared to the conventional binders. The electrode sing the CMC and styrene-butadiene rubber (SBR) binder not only has almost the similar cycle characteristics with the electrode using the CMC binder but also has the better rate capability. When the fluoroethylene carbonate (FEC) is used as an electrolyte additive, the cycle life is improved. However, the electrolyte with 5 wt% of FEC is appropriate because the rate capability decreases when the content of FEC is increased to 10 wt%. In addition, when the mass loading of the electrode is lowered, the cycle performance is greatly improved. Also, enhanced cycle performance is achieved using the roughened Cu current collector polished by abrasive paper.

• Journal of Oriental Neuropsychiatry
• /
• v.4 no.1
• /
• pp.155-164
• /
• 1993

In this study the author had attempted to establish a correlation among alcohol use and MMPI and lunar cycle. MMPI was carried on 2, April 1992(the last day of the second lunar month) and 15, June 1992(the fifteenth day of the fifth lunar month). These experiments took male and female students who were in WON KWANG University as subjects. The results of it suggested the followings. 1) Drinkers and normal subjects average of T-score in each scales were in a normal scores. 2) In every scales except L,K,Si scales drinkers showed higher scores than normal subjects. There was a significant difference on L, F, Pd, Pa, Sc, Ma scales. 3) On the fifteenth day of the month, drinkers showed Higher T-Scores than normal subjects in every scales excepts L,K,Si scales. There was a significant difference in Ma scale. 4) On the last day of the month, drinkers showed higher T-scores than normal subjects in every scales except L,K,Mf,Si scales. There was a significant difference on L, F, Pd, Sc, Ma scales. 5) Drinkers showed higher than normal subjects in symptom of neurosis and psychosis. As the results of above, human character changes to some extend according to alcohol use. There is a tendency that repeated drinking of college students prone to change into habitual drinking or alcoholic impairment. So controlled drinking among the college students is highly recommended.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.198-198
• /
• 2013

Metal-Oxide-Semiconductor (MOS)에서 사용되는 다양한 channel materials로 high electron mobility을 가지는 III-V compound semiconductor가 대두되고 있다 [1,2]. 하지만 이러한 III-V compound semiconductor는 Si에 비해 안정적인 native oxide가 부족하기 때문에 Si, Ge, Al2O3과 BeO 등과 같은 다양한 물질들의 interface passivation layers (IPLs)에 대한 연구가 많이 되고 있다. 이러한 IPLs 물질은 0.5~1.0 nm의 매우 얇은 physical thickness를 가지고 있고 또한 chemical inert하기 때문에 플라즈마 식각에 대한 연구가 되고 있지만 IPLs 식각 후 기판인 III-V compound semiconductor에 physical damage과 substrate recess를 줄이기 위해서 높은 선택비가 필요하다. 이러한 식각의 대안으로 원자층 식각이 연구되고 있으며 이러한 원자층 식각은 반응성 있는 BCl3의 adsorption과 low energy의 Ar bombardment로 desorption으로 self-limited한 one monolayer 식각을 가능하게 한다. 그러므로 본 연구에서는, III-V compound semiconductor 위에 IPLs의 adsorption과 desorption의 cyclic process를 이용한 원자층식각으로 다양한 물질인 SiO2, Al2O3 (self-limited one monolayer etch rate=about 1 ${\AA}$/cycle), BeO (self-limited one monolayer etch rate=about 0.75 ${\AA}$/cycle)를 얻었으며 그 결과 precise한 etch depth control로 minimal substrate recess 식각을 할 수 있었다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.1823-1827
• /
• 2012

The gene encoding the Nin one binding (NOB1) protein which plays an essential role in protein degradation has been investigated for possible tumor promoting functions. The present study was focused on NOB1 as a possible therapeutic target for breast cancer treatment. Lentivirus mediated NOB1 siRNA transfection was used to silence the NOB1 gene in two established breast cancer cell lines, MCF-7 and MDA-MB-231, successful transfection being confirmed by fluorescence imaging. NOB1 deletion caused significant decline in cell proliferation was observed in both cell lines as investigated by MTT assay. Furthermore the number and size of the colonies formed were also significantly reduced in the absence of NOB1. Moreover NOB1 gene knockdown arrested the cell cycle and inhibited cell cycle related protein expression. Collectively these results indicate that NOB1 plays an essential role in breast cancer cell proliferation and its gene expression could be a therapeutic target.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.138-143
• /
• 2004

Recently there has been a great world-wide interest in developing and characterizing new nano-structured materials. These newly developed materials are often prepared in limited quantities and shapes unsuitable for the extensive mechanical testing. The development of depth sensing indentation methods have introduced the advantage of load and depth measurement during the indentation cycle. In the present work, ZnO thin films are prepared on Si(111), Si(100) substrates at different temperatures by pulsed laser deposition(PLD) method. Because the potential energy in c-axis is low, the films always show c-axis orientation at the optimized conditions in spite of the different substrates. Thin films are investigated by X-ray diffractometer and Nano indentation equipment. From these measurements it is possible to get elastic modulus and hardness of ZnO thin films on Si substrates.