• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.187-194
• /
• 2012

The strength of particle-reinforced metal matrix composites is, in general, known to be increased by the geometrically necessary dislocations punched around a particle that form during cooling after consolidation because of coefficient of thermal expansion (CTE) mismatch between the particle and the matrix. An additional strength increase may also be observed, since another type of geometrically necessary dislocation can be formed during extensive deformation as a result of the strain gradient plasticity due to the elastic-plastic mismatch between the particle and the matrix. In this paper, the magnitudes of these two types of dislocations are calculated based on the dislocation plasticity. The dislocations are then converted to the respective strengths and allocated hierarchically to the matrix around the particle in the axisymmetric finite-element unit cell model. The proposed method is shown to be very effective by performing finite-element strength analysis of $SiC_p$/Al2124-T4 composites that included ductile failure in the matrix and particlematrix decohesion. The predicted results for different particle sizes and volume fractions show that the length scale effect of the particle size obviously affects the strength and failure behavior of the particle-reinforced metal matrix composites.

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.211-216
• /
• 2009

Much research into two-dimensional (2-D) photonic crystal (PC) structures has been conducted for realization of ultrasmall optical integrated circuits. A 2-D silicon (Si) PC slab structure with air cladding (n=1) is one of the representative structures in 2-D PCs. While air-clad Si PC slab structures have good optical characteristics, their suspension in air can lead to mechanical weakness, making integration with some optical devices difficult. In this paper, we propose improving the mechanical robustness of PC structure by developing a 2-D Si PC structure with symmetric silica cladding (n=1.44) and comparing its optical properties to that of the air-clad structure. First, we investigate the optical properties of a 2-D Si PC slab structure with air cladding by using a 3-D finite difference time domain method. We determined that a photonic bandgap of 330 nm and a non-leaky propagating bandwidth of 100 nm in the optical communication range are possible. Next, we investigate the optical properties of 2-D Si PC slab structures with silica cladding. Even though the refractive index of the silica cladding is higher than that of air, we developed a silica-clad structure with good optical properties: a photonic band gap of approximately 230 nm and a non-leaky propagating bandwidth of 90 nm, comparable to that of the air-clad PC structures.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.53-59
• /
• 2010

This paper mainly focuses on the Korean Folk Village and Beijing Si-He-Yuan, according to the color theory of hue, value and chroma of Munsell color system to demonstrates the similarities and differences of the traditional upper-class housing between South Korea and China. As the neighboring countries sharing very similar culture and philosophy which owe to the continual communications between China and Korea in the history. The Obangsaek which is derived from the thought of five-elements profoundly and deeply impact on the color selection of traditional housing in both countries. According to the quantitative analysis of photographs, it was found that: 1. The commonly used colors in Korea are Y, YR and neutral color, but in China, people usually used R and GY, especially the high chroma red in Beijing Si-He-Yuan was used as a symbolic color. 2. The chroma preference of traditional housing reveals that people in China used to apply the polychrome and various brightness, on the contrary, the color of low chroma and high lightness were used to be applied in Korea which can give the sense of simplicity and tranquility. 3. Red, one of the Obangsaek affects the color characteristic of Beijing Si-He-Yuan critically but scarcely impact on the color characteristic of Korean Folk Village.

• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.145-153
• /
• 2012

In this study, we quantify the residual motion artifact in 4D-CT scan using the dynamic lung phantom which could simulate respiratory target motion and suggest a simple one-dimension theoretical model to explain and characterize the source of motion artifacts in 4DCT scanning. We set-up regular 1D sine motion and adjusted three level of amplitude (10, 20, 30 mm) with fixed period (4s). The 4DCT scans are acquired in helical mode and phase information provided by the belt type respiratory monitoring system. The images were sorted into ten phase bins ranging from 0% to 90%. The reconstructed images were subsequently imported into the Treatment Planning System (CorePLAN, SC&J) for target delineation using a fixed contour window and dimensions of the three targets are measured along the direction of motion. Target dimension of each phase image have same changing trend. The error is minimum at 50% phase in all case (10, 20, 30 mm) and we found that ${\Delta}S$ (target dimension change) of 10, 20 and 30 mm amplitude were 0 (0%), 0.1 (5%), 0.1 (5%) cm respectively compare to the static image of target diameter (2 cm). while the error is maximum at 30% and 80% phase ${\Delta}S$ of 10, 20 and 30 mm amplitude were 0.2 (10%), 0.7 (35%), 0.9 (45%) cm respectively. Based on these result, we try to analysis the residual motion artifact in 4D-CT scan using a simple one-dimension theoretical model and also we developed a simulation program. Our results explain the effect of residual motion on each phase target displacement and also shown that residual motion artifact was affected that the target velocity at each phase. In this study, we focus on provides a more intuitive understanding about the residual motion artifact and try to explain the relationship motion parameters of the scanner, treatment couch and tumor. In conclusion, our results could help to decide the appropriate reconstruction phase and CT parameters which reduce the residual motion artifact in 4DCT.

• Electronics and Telecommunications Trends
• /
• v.10 no.3 s.37
• /
• pp.183-189
• /
• 1995

최근 통신서비스의 보급확대에 따른 통신용 단말기의 수요가 증가하고 있으나 단말기 용 핵심 부품인 서큘레이터를 전량 수입에 의존하고 있다. 본 고에서는 페라이트 재료 개발 및 측정, 접함 서큘레이터, 서큘레이터의 결합방법, 회전자의 평판 회로에 대한 수치해석, 주파수 선택의 한계, GaAs 복합물, Si에 사용하는 반도체 기술을 이용한 응용기술, 페라이트 구조에 가격과 크기를 줄이기 위하여 보다 간단한 단일체 회로를 제시 그리고 새로운 구조 연구와 정확한 설계에 대한 이론 연구가 활발히 진행되고 있는 유럽, 미국 일본의 기술동향과 문제점 및 대책을 기술하였다.

• Journal of Sensor Science and Technology
• /
• v.5 no.2
• /
• pp.9-14
• /
• 1996

We have fabricated the vacuum magnetic sensor with a lateral field emitter arrays constructed on n-Si substrate, and investigated its magnetic characteristics. The device consists of 100 field-emitter tips with a $10{\mu}m$ pitch, gate, and split-anodes which are laterally structured. The electron-emission characteristics from the emitter followed the Fowler-Nordheim tunnelling theory. The sensor has good linear characteristics and high sensitivity of 825 %/T.

• Polymer Science and Technology
• /
• v.15 no.3
• /
• pp.363-373
• /
• 2004

1980년대 초, IBM의 과학자들에 의해 양자역학 현상에 기초한 새로운 현미경이 발명되었다. 뾰족한 금속 팁에 전압을 걸고 전도성 시료의 표면에 접근시키면, 팁이 표면에 접촉하기 직전에 터널링에 의한 전류가 흐르게 된다. 이 전류는 거리에 매우 민감해서 고체 표면에 배열된 원자들에 의해 형성되는 표면 굴곡 (surface corrugation)이 분간 가능하였다. 이 기계가 바로 STM (Scanning Tunneling Microscope)이다 (그럼 1). 이 발명이 있기까지의 약 2세기 가량의 시간 동안 "누구에 의해서도 결코 감지된 적 없는" (H. J. Robinson, Physics Today, March, 24, 1984.) 원자와 분자는 과학자들의 논리 속에 이론상으로 존재할 뿐이었다. STM의 발명으로 인해 인류는 바야흐로 개개의 원자와 분자를 직접적으로 감지할 수 있게 되었던 것이다. 처음으로 STM을 이용하여 원자해상도로 본 표면은 실리콘의 안정한 표면인 Si (111)-7${\times}$7 표면이었는데, 이러한 실리콘 표면의 STM 사진의 예를 그림 2에 나타내었다. (중략)타내었다. (중략)

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.28-28
• /
• 2003

고온가압소결(Hot Pressing) 된 다이아몬드 공구용 Co-Fe, Co-Ni계 금속본드의 상온 건식 미끄럼 마멸시험을 행하고, 조성에 따른 각 본드의 마멸 특성을 비교하고 마멸 기구를 규명하였다. 미끄럼 마멸시험은 pin-on-disk 형태의 마멸시험기를 사용하여 각 조성의 성분, 적용하중 그리고 마멸상대재를 변수로 상온, 대기 중에서 실시되었다. 마멸속도는 마멸시험 전후의 시편의 무게 감량을 이론밀도와 거리로 나누어 계산되었다. 마멸기구의 규명을 위하여 시험된 시편의 마멸면과 마멸단면을 SEM과 EDS를 이용하여 분석하였다. 시험 결과 Co-Fe system의 경우 그 마멸속도는 마멸상대재의 영향보다는 Fe 첨가에 따른 시편의 미세조직과 기계적 성질의 차이에 따라 크게 변화하였다. 그러나 Co-Ni system의 마멸속도는 마멸 상대재에 따라 크게 변화하는 것이 관찰되었다. $Al_2$O$_3$를 상대재로 마멸된 경우에는 마멸속도가 시편/상대재 접촉면에서 형성되는 산화층의 영향을 크게 받았고, glass bead(83% SiO$_2$)를 상대재로 한 경우에는 시편의 경도와 마멸속도는 서로 반비례하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1657-1664
• /
• 1991

본 연구에서는 재료의 이방성을 고려한 점소성 모델을 제시하였다. 공학적 인 견지에서 볼 때 이방성 재료의 기계적 거동을 표한하기 위해서는 단순화 이론(si- mplified theory)의 개발이 필요하게 되었으며 이에따라 Betten은 등방성 소성 포텐셜 (isotropic plastic potential)에서 응력텐서를 재료의 이방성을 포함하는 변환 응력 텐서(mapped stress tensor)로 대체함으로써 이방성을 고려하였다. 그러므로 실제 이방성 재료의 비탄성 거동은 가상의 등방성 상태로 치환되며 여기에 소성 포텐셜 이 론을 적용하게 된다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.391-394
• /
• 1999

제작되어진 LFB PVDF 초음파트랜스듀서를 이용하여 누설탄성표면파(Leaky Surface Acoustic Wave : LSAW)측정을 하였다. 시료로서는 $SiO_2$, Al, Cu등을 사용하였고, 측정방법으로써는 초점면에 위치한 시료를 트랜스듀서 쪽으로 접근시켰을 때 LSAW가 트랜스듀서의 중심축을 통과한 후 시료표면에서 반사되어오는 종파와 분리되어지는 현상을 이용하였다. 실험결과는 Campbell and Jones의 이론에 의한 해석결과와 비교 분석하였는데 매우 잘 일치됨을 알 수 있었다.