• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.259-266
• /
• 2020

This study is a descriptive research for understanding the health behaviors, job stress, and musculoskeletal subjective symptoms of university employees, and also for examining the influence factors having effects on the musculoskeletal subjective symptoms. Targeting total 158 university employees, the data was collected from July to August 2020. In the results of this study, the characteristics related to health behaviors showed the percentages like the rate of drinking(68.6%), rate of smokers(9.6%), rate of exercising three times or more a week(15.4%), and the rate of regular eating habit(64.7%). The mean score of job stress was 63.7. The musculoskeletal disease symptom group falling under the occupational musculoskeletal subjective symptom standard of NIOSH was 18.6%, and the musculoskeletal subjective symptom of shoulders showed the highest rate. Also, the 29.5% of research subjects responded that the cause for their musculoskeletal pain was work. As the factors having effects on the musculoskeletal subjective symptoms, the sex, age, career experience, and job stress had significant effects on the subjective symptom of shoulder part(p<.01) while the regular exercise had significant effects on the subjective symptom of waist(p<.05). The educational background and regular meals had significant effects on the subjective symptom of legs and knees(p<.05). Thus, in order to prevent the musculoskeletal diseases of university employees, it would be necessary to develop/apply the programs for the relief of job stress, regular exercise, and regular meals.

• The Journal of Korean Academy of Prosthodontics
• /
• v.18 no.1
• /
• pp.15-35
• /
• 1980

The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.968-975
• /
• 2009

The purpose of the present study was to examine effects of different exercise training modes (Aerobic Training, Resistance Training) on exercise specificity and transability. The tested subjects, composed of 10 healthy males without known family history or medical illnesses, were divided into two groups: Aerobic Training Group (ATG; n=5) and Resistance Training Group (RTG; n=5). An aerobic training program, based on maximum oxygen consumption rates taken during standard testing, was conducted in 60 minute sessions 3 times a week, and the Heart Rate Reserve (HRR) at 70% of maximum oxygen consumption rate was measured the using Polar. In the weight training program, based on repetition maximum rate (1-RM) taken during standard testing, the weight at 70% of such rates was measured during 60 minute sessions of 7 categories of exercise (Bench press, Leg press, Squat, Shoulder press, Arm curt Lat pull down, Triceps pull down), conducted 3 times a week. The data collected from this research were calculated to obtain average and differences compared to standards using an SPSS 11.0 statistics package. In conclusion, increase in V0$_{2max}$ and production of NO$_x$ (NO$_2$/NO$_3$), reduction of %fat, MAPwere shown effective in aerobic training and in different exercise tests, and aerobic testing within the aerobic training group (ATG) was shown to be more effective. In contrast, resistance training was shown to be more effective for the reduction of CK and LDH, and even in different tests, the resistance test within the resistance training group (RTG) showed to be more effective. Exercise specificity also significantly increased in both groups (ATG, RTG). but there was no significant difference in transability in both groups (ATG, RTG).

• Journal of muscle and joint health
• /
• v.4 no.1
• /
• pp.48-60
• /
• 1997

This study was undertaken to identify the musculotendinous problems and contributing factors to those problems In students majoring in musical instruments in Korea. The data were collected from March 2, 1996 to March 31, 1996 from 261 music students in various geographical areas. The data were analyzed for descriptive statistics, t-test, chi-square using SPSS $PC^+$ program. The results of this study were as follows : 1. In a questionnaire survey of 261 music students, one hundred twenty five(47.9%) reported having had various musculotendinous symptoms. Twenty seven students among the those who had previous symptoms(21.9%) reported the present symptoms. 2. The experience rates of musculotendinous problems in keyboard players, string players and woodwind players were 50.3%, 48.2%, 33.3% respectively. 3. Most of the students practiced most intensively during their high school years and the musculotendinous symptoms began at the same period. 4. Pain, tenderness and stiffness were the most common symptoms, while paresthesia and motor dysfunction were rare. This indicates that most players had muscle tendinous overuse, while small number had nerve entrapment and motor dysfunction. 5. In past and present symptoms, string players experienced musculotendinous symptoms mainly in both sides of shoulders, lumbar area, left finger, and left wrist, while keyboard players experienced more symptoms in the right wrist, shoulder, fingers than left side. 6. The major contributing factors to the symptoms were weight of instrument, types of instruments, types of daily activities, duration of practice, and playing technique. 7 The most frequent treatment modalities for the symptoms were acupuncture or moxibustion, other alternative therapy such as heat compress and massage. Through this study it was found that the musculotendinous problems might be increased along with their career, due to lack of knowledge about preventive measures and patterns of health behavior seeking alternative modalities rather than professional consultation. Therefore, preventive measures that focus on playing habits such as duration of practice, frequency of rest and position while playing should be developed and taught to the students, their parents, and music educators. Doctors who are interested in this area should attempt to correct the position and posture while playing of the posture. And measures for reduction of loading of instrument weight should also be developed.

• The Journal of the Korean bone and joint tumor society
• /
• v.12 no.2
• /
• pp.118-125
• /
• 2006

Purpose: We report elastofibroma which is a rare fibrous lesion that most commonly occurs in the between subscapularis and thoracic cage. Materials and Methods: Four patients include one man and three women, the average age was 70 years and the average follow up period was six months. Two patients had on left side, two patients had on both sides. Main symptom was palpable mass. One patient complained mild pain, two complained scapular snapping. Results: All four masses removed with marginal or wide margin. Average mass size was 9.7${\times}$7.2${\times}$3.8 cm. Preoperative symptoms disappeared after surgery. All of the patients have returned to their daily living and showed no recurrence. There was no serious complication such as limitation of shoulder motion and winged scapula. Conclusion: Elastofibroma scapulae can be diagnosed through patient's age, tumor location and radiological finding without preoperative biopsy. When patient is symptomless, observation is enough without surgical operation. Surgical operation considered for relieve of symptoms of pain and snapping.

• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.90-102
• /
• 1993

A study on the factors affecting subjective symptoms of labor working in textile industries was carried out from June I to 30 in 1991. A total of 870 laborers were selected from the textile industries at Taegu, Kyungbuk in Korea. The purpose of this study was to determine the factors affecting subjective symptoms and improve the health condition of the labor in the industries. The results of this study can be summarized as follows: 1. 72.5% of the respondents were females and 27.5% were males. 45% of them were in the age group of between 20 and 29 years old, 25.7% were between 10 and 19 years old and 14.4% were between 30 and 39 years old. 57.6% finished high school level education, 70.6% were single, 31.2% had religion of Buddhism and 57.3% lived in the dormitory. Financially, 45% of them partially supported their family members. 2. 34.5% of the respondants were working in the administrative areas and the rest were working in the production areas. The period of working was 1~4 years. 64.7% of them owned their houses. 72.9% worked for a shift. 15.9% were satisfied with their job and 17.1% were not satisfied with their job. 3. 44.0% of the respondants complained about eye problems and more females than males complained about problems. 4. The laborers in the age group of between 40 and 49 years old complained about serious headache and younger laborers complained about respiratory problems. 5. 50% of unmarried laborers complained about eye problems, 40% of night workers felt aches in their empty stomach. 6. 54.4% of the respondents working in manufacturing department complained about eye problems, 29.5% of working in processing department complained about headache and 43.4% of the respondents working in spinning department complained about shoulder ache. 7. Most laborers went to the drug stores for their health. 8. 60.7% of teen ages complained about their irregular menstruation. 51.7% of the in twenties complained about pain during the period. 45.8% of the respondents in thirties complained about nervous system. The women working nights show 74.1% in all three and highest complaint rate. According to the conclusion of this study, it is recommended that more money should be spent on better health education for the laborers in textile industries. Also it is recommended that the policies and supports for them should be strengthened.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.4
• /
• pp.769-781
• /
• 2017

The purpose of this study was to investigate the effects of nurses' perceived burden from work and health problems on the presentism of nurses. The study subjects were recruited from four general and tertiary hospitals in K province and D metropolitan city. A quarter of nurses had shoulder, back, and neck pain and average number of health problems was 3.62. The nurses' presenteeism score was $43.37{\pm}12.43$ points out of 100 points. There was a statistically significant relationship between nurses' perceived burden, numbers of health problems, and presenteeism. The numbers of health problems and perceived burden of nurses had significant effects on presenteeism of nurses while controlling demographic factors such as length of work experience, job position, types of hospital, and gender. These results suggested that the less burden from work and the lower number health problems could result in the lower level of presenteeism of nurses. Therefore, it is necessary to develop diverse strategies to reduce the burden of nurses and health problems at both individual and organizational levels as a way to increase productivity of hospital.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.4
• /
• pp.769-781
• /
• 1997

The purpose of this research is to show how to use the patternist's CAD system in order to make design patterns efficiantly. Using the PAD System Technologies company's PAD System Module, which is very officiant in designing patterns, the basic pattern or design pattern can be designed and applyed to the Sample Module, thus, then it could manufacture, retouch or choose a model, making it posible to go to the next level which is seam patterns for industrial use. By understanding the change of the design that is chosen through the design pattern making and Sample Module process', this study is presentated a plan on how to utilize the patternist's working adaption ability by the CAD system, and also considered the problems in using it. Ability of Design Confrontation of CAD System: 1) The result of an operation can be saved and retouched. On a saved list the patterns can be chosen and changed, thus, making it posible to complete a design very quickly. 2) When sewing every designed pattern in Sample Module, the model can be operated merely by selecting each sewing position, thus creating the same effect of a designer's muslin sample process in a much lesser time. Point at issue in the utilization CAD system: 1) When combining two darts into one place the amounts of darts that are already these have to be erasers, and then, the two darts points are moved that place, thus, containing them, which is very conplicated. 2) When making a gathering, because system can only be recognized in a opend line, the pattern should be separated in order to put a gathering inside a pattern. 3) In order to readjust the amounte of dart. The dart is erased first and then made new dart again. 4) When making tucks in a Sample Module, the form that gets narrow towards the pivot point can not be recognized so the sewing lines of the tucks is adjusted into parallel lines. 5) The Sample Module 3D operation can not attach the bodice to the shirts, instead they become fixed into each other. In the case of shoulder line tucks the amounts of pleats can not be expanded draperary naturally, thus, making it hard to showing the silhouette accurately. If these problems are solved, especially if the silhouette of a model can be created to have natural drapery in the 3D Module, models can be shown on the screen in possible to compare and examine even a change of a detail, by designing this 3D Module Production sample process will be more effective, thus, making the CAD system more useful in sewing design process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.959-967
• /
• 2008

The body measurement ratios and indices used in this study are all 3D female measurement data of the two countries were obtained from Size Korea Project and SizeUSA Project. The purpose of the study is to compare and analyze body measurement data between two countries. The results of this research are helpful for the clothing manufacturer and company to trade with America. The samples were 1,988 Korean and 6,306 American females. Thirty-five body measurement ratios and indices were chosen as the principal measurements in making garments. The conclusion of this research was as follow; First, U.S. females have measurements that exceed Korean women, except for crotch length total and shoulder slope. Second, the correlation coefficients of height and weight are relatively higher than other measurements in the two countries' body measurements. Finally, American women's height ratios are significantly bigger than Korean women's in most height ratios. On the other hand, Korean are significantly bigger than American in weight ratios. The drop values of Korean females are also smaller than those of American. It was recognized that American women are much bigger, wider and more obese than Korean according to the results by utilizing the girth ratios. BMI, Rohrer and Vervaeck index.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1824-1832
• /
• 2011

In this paper, a smart home service robot McBot II is newly developed in much more practical and intelligent system than McBot I which we had developed a few years ago. Thus far, vacuum-cleaners have lightened the burden of household chores but the operational labor that vacuum-cleaners entail has been very severe. Recently, a cleaning robot was commercialized to solve but it also was not successful because it still had the problem of mess-cleanup, which pertained to the clean-up of large trash and the arrangement of newspapers, clothes, etc. Hence, we develop a new home mess-cleanup robot McBot II to completely overcome this problem on real environments. The mechanical design and the basic control of McBot II, which performs mess-cleanup function etc. in house, is actually focused in this paper. McBot II is mechanically modeled in the same method that the human works in door by using the waist and the hands. The big-ranged vertical lift and the shoulder joints to be able to forward move are mechanically designed for the operating function as the human's waist when the robot works. The mobility of McBot II is designed in the holonomic mobile robot for the collision avoidance of obstacle and the high speed navigation on the small area in door. Finally, good performance of McBot II, which has been optimally desinged, is confirmed through the experimental results for the control of the robotic body, mobility, arms and hands in this paper.