• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.535-541
• /
• 2005

This paper proposes a hybrid optical lines composed of single-mode fiber(SMF) and multi-mode fiber(MMF) for gigabit-capable Passive Optical Network(GPON) using a WDM method with a single light source per each channel, and reports the results of transmission performance the proposed lines. The transmission link uses a direct modulated DFB-LD for high speed downstreams at the optical line terminal(OLT) of central office(CO) and a low cost SFP type transceiver for low-speed upstream in optical network unit(ONU). To split or combine the transmission channels, wavelength MUX/DEMUX are used in the optical line section, and MMFs not longer than 1 km are attached to the SMF lines at the ONU side of the WDM-PON links. We have performed the transmission experiment on the downstream of 2.5 Gbit/s, and 1.25 Gbit/s, and the upstream of 1.25 Gbit/s, and 622 Mbit/s which are recommended by ITU-T G.984.2. The transmission margin and feasibility of the proposed links have been tested to be suitable up to 2.5 Gbit/s transmission.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.6
• /
• pp.427-432
• /
• 2019

Objectives: In Indonesia, 61 million adults smoked in 2018, and 59 million were exposed to secondhand smoke at offices or restaurants in 2011. The Presidential Decree 109/2012 encouraged local governments to implement a smoke-free policy (SFP), and the city of Jayapura enacted a local bill (1/2015) to that effect in 2015. This study aimed to evaluate compliance with this bill and to explore challenges in implementing it. Methods: We conducted a mixed-methods study. Quantitatively, we assessed compliance of facilities with 6 criteria (per the bill): the presence of signage, the lack of smoking activity, the lack of sale of tobacco, the lack of tobacco advertisements, the lack of cigarette smoke, and the lack of ashtrays. We surveyed 192 facilities, including health facilities, educational facilities, places of worship, government offices, and indoor and outdoor public facilities. Qualitatively, we explored challenges in implementation by interviewing 19 informants (government officers, students, and community members). Results: The rate of compliance with all 6 criteria was 17% overall, ranging from 0% at outdoor public facilities to 50% at health facilities. Spatial patterning was absent, as shown by similar compliance rates for SFP facilities within a 1-km boundary around the provincial and city health offices compared to those outside the boundary. Implementation challenges included (1) a limited budget for enforcement, (2) a lack of support from local non-governmental organizations and universities, (3) a lack of public awareness at the facilities themselves, and (4) a lack of examples set by local leaders. Conclusions: Overall compliance was low in Jayapura due to many challenges. This information provides lessons regarding tobacco control policy in underdeveloped areas far from the central government.

• Animal Bioscience
• /
• v.34 no.4
• /
• pp.734-742
• /
• 2021

Objective: The present study aimed to investigate the occurrence and species of coagulase-positive staphylococci (CoPS) and coagulase-negative staphylococci (CoNS) in retail pork meat samples collected during nationwide monitoring. The staphylococcal isolates were characterized for antimicrobial and zinc chloride resistance and enterotoxigenic potential. Methods: A total of 260 pre-packaged pork meat samples were collected from 35 retail markets in 8 provinces in Korea for isolation of staphylococci. Antimicrobial and zinc chloride resistance phenotypes, and genes associated with the resistance phenotypes were determined on the isolates. Furthermore, the presence and distribution of 19 staphylococcal enterotoxin (SE) genes and enterotoxin-like genes among the pork-associated staphylococci were determined by multiplex polymerase chain reaction-based assays using the specific primer sets. Results: A total of 29 staphylococcal strains (29/260, 11.1%) were isolated from samples of retail pork meat, 24 (83%) of which were CoNS. The four CoNS species identified were S. saprophyticus (n = 16, 55%), S. sciuri (n = 3, 10%), S. warneri (n = 3, 10%), and S. epidermidis (n = 2, 7%). Among the 29 isolates, four methicillin-resistant CoNS (MR-CoNS; three S. sciuri and one S. epidermidis) and one methicillin-resistant CoPS (MR-CoPS; one S. aureus) were identified. In addition, a relatively high level of tetracycline (TET) resistance (52%) was confirmed in CoNS, along with a predominant distribution of tet(K). The most prevalent SEs were sep (45%), and sen (28%), which were carried by 81% of S. saprophyticus. Conclusion: These findings suggest that CoNS, especially S. saprophyticus strains, in raw pork meat could be a potential risk factor for staphylococcal food poisoning (SFP), and therefore, requires further investigation to elucidate the role of SEls in SFP and virulence of the pathogen. Our results also suggest that CoNS from raw pork meat may act as a source for transmission of antimicrobial resistance genes such as staphylococcal cassette chromosome mec and tet(K).

• The Journal of Korean Academy of Sensory Integration
• /
• v.20 no.3
• /
• pp.1-13
• /
• 2022

Objective : The purpose of this study was to investigate changes in somato-sensory and occupational performance of individually tailored sensory integration interventions for school-age children with somatodyspraxia. Methods : A single subject study with an AB design was conducted the total sessions were 11 sessions, consisting of 3 baseline sessions and 8 intervention sessions. To compare the effects before and after the intervention, the intervention was measured by dividing it into Performance Area (PA) and Performance Factor (PF), and after each intervention session, the Goal Attainment Scale (GAS) was implemented. Results : The children participating in this study showed overall improvement in PA and PF after the intervention, and after each session, it was confirmed that the GAS increased when measuring the target activities (Supine Flexion Posture; SFP, Walking by Arms; WA, Stand on Balance Ball; SBB). Conclusion : This study provided evidence that sensory integration has a positive effect on performing target activities (SFP, WA, SBB) and improving relationships with peers in children with somatodyspraxia.

• BMB Reports
• /
• v.48 no.5
• /
• pp.241-242
• /
• 2015

Reproductive behaviors have evolved through severe inter-sexual competition. We have recently described a behavior in post-mated female Drosophila melanogaster that controls ejaculate retention and sperm storage, and is a possible mechanism by which females who have mated with several partners can choose which sperm that is stored and used for fertilization. This behavior can also regulate exposure of the female to harmful effects of male SFP that are present in the ejaculate. Our study identified the neural pathway functioning in the female brain that regulates this behavior. [BMB Reports 2015; 48(5): 241-242]

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.529-532
• /
• 2005

In this paper, we propose a motion picture processor for CSTN LCD. In order to eliminate flicker phenomenon, the proposed processor suggests a new driving scheme, SFP(Subgroup Frame Pattern). We use an input image compression methode from RGB(:8:8;8) to RGB(5:6:5) to improve quality of the image and apply the image to CSTN Module. The proposed hardware architecture has been implemented and verified using a FPGA on prototype board. The proposed Algorithm provide a lower computational complexity. Therefore the processor can be used in the display devices such as PDA, mobile phone and PMP(Portable Multimedia Player).

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.87-87
• /
• 2003

Three kinds of acrylic polymers containing silk protein were synthesized, which are (1) blending of silk fibroin (SF) fiber and polyacrylonitrile (PAN); (2) graft-copolymer of PAN onto SFs; (3) random-copolymer synthesized by copolymerization of acrylonitrile (AN) and silk fibroin peptide (SFP) with vinyl groups, and their solubility, thermal property, and moisture absorption was investigated, respectively. These polymers have difference solubility and attributable to their structure. Their excellent thermal stabilities and better moisture absorptions were indicated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2062-2072
• /
• 1991

The effect of free stream turbulence on the flow characteristics behind a circular cylinder is investigated in the present experimental study. The various free stream turbulent intensities are generated by different combinations of cylinder locations and grid shapes. Split film sensor with constant temperature anemometer is used to measure the local instantaneous velocity components. Experimental results demonstrate the large scale coherent structures are rapidly distorted and the Strouhal number is decreased with increasing free stream turbulent intensity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.711-714
• /
• 2005

This paper is for the vibration analysis of thick plate with concentrated mass on a inhomogeneous pasternak foundation. the thick rectangular plate resting on a inhomogeneous pasternak foundation is isotropic, homogeneous and composite with linearly elastic material. In order to analyize plat which is supported on inhomogeneous pasternak foundation, the value of winkler foundation parameter(WFP) of centural and border zone of plate are chosen as Kw1 and Kw2 respectively. The value of Kw1 and Kw2 can be changed as 0, 10, $10^2,\;10^3$ and the value of SFP(shear foundation parameter) also be changed 0, 5, 10, 15 respectively. Finally, In this paper, vibration of retangular plate on the inhomogeneous pasternak foundation, natural frequency of this plate with Concentrated Mass are calculated

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1191-1194
• /
• 1995

A conversational programming system for turning processes was studied to enhance the user friendlness of an NC by adopting man-machine interface functions through Visual C $^{++}$ programming tool under the Windows 95 environment. Shop floor programming performance was incorporated in the developed CAM module. In order to increase flexibility of the man-machine interface, graphic based programmin tool have been developed. An NC turning machine equipped whit an open architecture PCNC was used as a test bed of the system. Perfomance of the system was verified through case studies..