• 제목/요약/키워드: SFG

검색결과 47건 처리시간 0.024초

모드 잠금된 펄스 레이저와 연속 발진하는 반도체 레이저를 이용한 합주파수 생성 (Sum-frequency Generation Using a Mode-locked Pulsed Laser and a Continuous-wave Diode Laser)

  • 김현학;박남훈;염동일;차명식;문한섭
    • 한국광학회지
    • /
    • 제32권2호
    • /
    • pp.62-67
    • /
    • 2021
  • 본 연구에서는 모드 잠금된 ps-펄스 광섬유 레이저와 연속 발진하는 좁은 선폭의 반도체 레이저를 이용하여 주기적 분극반전된 LiNbO3(periodically poled lithium niobate; PPLN) 결정에서 합주파수 생성 연구를 수행하였다. 모드 잠금된 펄스 레이저는 중심 파장이 1560.7 nm이고 스펙트럼의 폭은 약 1.1 nm이며, 연속 발진 반도체 레이저는 중심 파장이 1551 nm이고 스펙트럼의 폭은 약 6 MHz로 동작한다. 합주파수 생성을 효과적으로 수행하기 위해서 하나의 단일 모드 광섬유를 이용하여 PPLN 결정 내부에서 두 펌프 광원을 공간적으로 완전히 중첩하였다. 모드 잠금된 펄스 레이저와 좁은 선폭의 연속발진 반도체 레이저에 의해서 모드 잠금된 펄스 형태의 778 nm인 합주파수 생성을 스펙트럼과 시간적인 변화로 확인하였다. 본 연구 결과는 주파수 제어가 가능한 광주파수 빗(optical frequency comb)을 이용한 광주파수 측정 및 고분해 레이저 분광 연구 등 다양하게 응용될 수 있을 것으로 기대된다.

멍게(Halocynthia roretzi)의 계절별 생리적 변화 및 에너지 수지 (Physiological Changes and Energy Budget of the Sea Squirt Halocynthia roretzi from Tongyeong, South Coast of Korea)

  • 신윤경;전제천;김응오;허영백
    • 한국수산과학회지
    • /
    • 제44권4호
    • /
    • pp.366-371
    • /
    • 2011
  • The sea squirt Halocynthia roretzi is mainly cultured in Tongyeong, Southern coastal area of Korea. This study presents the physiological rates of respiration, excretion, feeding and assimilation efficiency of the sea squirt Halocynthia roretzi to analyze the SFG(scope for growth) and net growth efficiency, determined during 2007. Oxygen consumption and nitrogen excretion rates increased with a rise in temperature during the summer period whereas feeding rates decreased. The O:N ratio was high during winter(October to February). Assimilation efficiency showed an annual average of 75.4% during the experimental period, except during a period of elevated temperature in July to September(average $25^{\circ}C$). Net growth efficiency($K_2$) was 8.7 to 64.2% except for May to September, when temperature increased at the aquaculture farm. SFG was negative from May to September, reflecting high temperatures and low feeding rates during this period; its highest positive values occurred during winter.

텍스트의 의미 정보에 기반을 둔 음성컨트롤 태그에 관한 연구 (A Study of Speech Control Tags Based on Semantic Information of a Text)

  • 장문수;정경채;강선미
    • 음성과학
    • /
    • 제13권4호
    • /
    • pp.187-200
    • /
    • 2006
  • The speech synthesis technology is widely used and its application area is also being broadened to an automatic response service, a learning system for handicapped person, etc. However, the sound quality of the speech synthesizer has not yet reached to the satisfactory level of users. To make a synthesized speech, the existing synthesizer generates rhythms only by the interval information such as space and comma or by several punctuation marks such as a question mark and an exclamation mark so that it is not easy to generate natural rhythms of people even though it is based on mass speech database. To make up for the problem, there is a way to select rhythms after processing language from a higher level information. This paper proposes a method for generating tags for controling rhythms by analyzing the meaning of sentence with speech situation information. We use the Systemic Functional Grammar (SFG) [4] which analyzes the meaning of sentence with speech situation information considering the sentence prior to the given one, the situation of a conversation, the relationship among people in the conversation, etc. In this study, we generate Semantic Speech Control Tag (SSCT) by the result of SFG's meaning analysis and the voice wave analysis.

  • PDF

Nonlinear static and vibration analysis of Euler-Bernoulli composite beam model reinforced by FG-SWCNT with initial geometrical imperfection using FEM

  • Mohammadimehr, M.;Alimirzaei, S.
    • Structural Engineering and Mechanics
    • /
    • 제59권3호
    • /
    • pp.431-454
    • /
    • 2016
  • In this paper, the nonlinear static and free vibration analysis of Euler-Bernoulli composite beam model reinforced by functionally graded single-walled carbon nanotubes (FG-SWCNTs) with initial geometrical imperfection under uniformly distributed load using finite element method (FEM) is investigated. The governing equations of equilibrium are derived by the Hamilton's principle and von Karman type nonlinear strain-displacement relationships are employed. Also the influences of various loadings, amplitude of the waviness, UD, USFG, and SFG distributions of carbon nanotube (CNT) and different boundary conditions on the dimensionless transverse displacements and nonlinear frequency ratio are presented. It is seen that with increasing load, the displacement of USFG beam under force loads is more than for the other states. Moreover it can be seen that the nonlinear to linear natural frequency ratio decreases with increasing aspect ratio (h/L) for UD, USFG and SFG beam. Also, it is shown that at the specified value of (h/L), the natural frequency ratio increases with the increasing the values amplitude of waviness while the dimensionless nonlinear to linear maximum deflection decreases. Moreover, with considering the amplitude of waviness, the stiffness of Euler-Bernoulli beam model reinforced by FG-CNT increases. It is concluded that the R parameter increases with increasing of volume fraction while the rate of this parameter decreases. Thus one can be obtained the optimum value of FG-CNT volume fraction to prevent from resonance phenomenon.

진주조개 Pinctada fucata martensii의 실내월동을 위한 저온노출에 따른 생리적 변화 (Physiological Response of the Pearl Oyster, Pinctada fucata martensii, to Low Water Temperature: a Preliminary Study for Indoor Overwintering)

  • 이정미;이상원;조상만
    • 한국수산과학회지
    • /
    • 제43권1호
    • /
    • pp.54-62
    • /
    • 2010
  • With the aim of developing and indoor overwintering technique for Pearl oyster, Pinctada fucata martensii, the metabolic rates of young oysters (52.4-83.0 mm in shell length) were measured for 2 weeks at water temperatures of 8, 10, 12, and $14^{\circ}C$. The filtration rate (FR) ranged 0 to $4.84\;L\;h^{-1}gDW^{-1}$ (mean, $0.02{\pm}0.06 $ to $3.12{\pm}1.45$), with significant changes observed over thme except for the case of a water temperature of $14^{\circ}C$. Respiration rate (R) ranged from 0 to $2.370\;mgO2\;h^{-1}gDW^{-1}$ (mean, 0 to $1.77{\pm}0.37$), with significant respiratory disorders observed at temperatures below $12^{\circ}C$; in contrast, the rate increased on the $14^th$ day of the experiment in the case of a temperature of 14$^{\circ}C$. No significant difference was observed among the different water temperatures in terms of excretion rate (E) or absorption efficiency (Abs.eff), except for a significant decrease in aerobic metabolism in the case of water temperature of $8^{\circ}C$. The estimated scope for growth (SFG) ranged from -9.1 to $126.9\;J\;h^{-1}gDW^{-1}$ (mean. $-4.1{\pm}2.6$ to $82.85{\pm}42.6$). A significant energy Joss was found at $8^{\circ}C$, with negative SFG observed throughout the experiment and a gradual energy decrease observed over time at water temperatures of $10^{\circ}C$ and 120C. However. SFG remained positive throughout the experiment in the case of $14^{\circ}C$. The estimated minimum energy requirement, assessed from energy expenditure, is $8.00-34.24\;J\;h^{-1}gDW^{-1}$ (mean, $17.67{\pm}6.17$). In conclusion, the lowest temperature suitable for indoor overwintering is above $14^{\circ}C$.

Multichip아키텍춰 합성 알고리듬 설계 (The design of a Synthesis Algorithm for Multichip Architectures)

  • 박재환;전홍신;황선영
    • 전자공학회논문지A
    • /
    • 제31A권12호
    • /
    • pp.122-134
    • /
    • 1994
  • Design of a heuristic algorithm for high level synthesis of multichip architecture is presented in this paper. Considering the design constraints: individual chip area, I/O pin counts, chip-to-chip interconnection counts, interchip communication delay, and chip latecy, the proposed system automatically generates pipelined multichip architectures from behavioral descriptions. For efficient mulichip synthesis, a new methodology is proposed, which performs partitioning and schedulting of SFG into multichip architectures simultaneously. Experimental results for several benchmark programs show that the systems can be used for designing multichip hardware efficiently.

  • PDF

소프트웨어 펄스보간기의 성능비교에 관한 연구

  • 안중환;임현석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1992년도 춘계학술대회 논문집
    • /
    • pp.211-215
    • /
    • 1992
  • 보간기(Interpolator)는 NC 공작기계에서 공구의 궤적 및 이송속도를 제어하는 주요한 요소이다. 보간기는 보간계산 과 펄스의 발생을 전자회로로서 행하는 하드웨어 보간기와 컴퓨터 프로그램으로 수행하는 소프트웨어 보간기로 나눌 수 있는데 하드웨어 보간기는 고속보간이 가능하지만, 유연성이 부족한 단점이 있기 때문에 CNC 화 뒤로는 그 의존도가 점점 낮아지고 있다. 본 연구에서는 더 광범위한 기준펄스 보간기의 특성을 조사하기 위하여 DDA, SPD(Smooth Pulse Distribution), SFG(Saita Function Generator) 방식의 직선, 원호, 타원보간 성능을 알고리즘의 처리속도, 경로오차의 측면에서 비교, 분석하였다.

수온 변화와 개체크기에 대한 바지락, Ruditapes philippinarum의 최적 성장에 대한 연구

  • 이순우;왕순영;한경남
    • 한국어업기술학회:학술대회논문집
    • /
    • 한국어업기술학회 2001년도 추계 수산관련학회 공동학술대회발표요지집
    • /
    • pp.305-306
    • /
    • 2001
  • 수온은 개체들의 활성도와 분포를 제한하는 직접적인 요인이며, 에너지 수지에 포함되는 섭이 활동, 대사작용과 성장들을 포함한 대부분의 생리학적 과정들에 영향을 미친다(Fry, 1971). 적온 범위에 대한 변통은 종간 뿐만 아니라 종내에서도 크다. 그러므로 특정한 조건하에 생태적으로나 상업적으로 가치가 있는 종들에 대한 성장 실험(Scope for growth)은 필요하며, SFG는 넓은 범위의 환경상태에 대해서 민감하고, 정량적이며 통합적인 스트레스에 대한 반응을 제공한다. (중략)

  • PDF

Buckling and free vibration analysis of tapered FG- CNTRC micro Reddy beam under longitudinal magnetic field using FEM

  • Mohammadimehr, M.;Alimirzaei, S.
    • Smart Structures and Systems
    • /
    • 제19권3호
    • /
    • pp.309-322
    • /
    • 2017
  • In this paper, the buckling, and free vibration analysis of tapered functionally graded carbon nanotube reinforced composite (FG-CNTRC) micro Reddy beam under longitudinal magnetic field using finite element method (FEM) is investigated. It is noted that the material properties of matrix is considered as Poly methyl methacrylate (PMMA). Using Hamilton's principle, the governing equations of motion are derived by applying a modified strain gradient theory and the rule of mixture approach for micro-composite beam. Micro-composite beam are subjected to longitudinal magnetic field. Then, using the FEM, the critical buckling load, and natural frequency of micro-composite Reddy beam is solved. Also, the influences of various parameters including ${\alpha}$ and ${\beta}$ (the constant coefficients to control the thickness), three material length scale parameters, aspect ratio, different boundary conditions, and various distributions of CNT such as uniform distribution (UD), unsymmetrical functionally graded distribution of CNT (USFG) and symmetrically linear distribution of CNT (SFG) on the critical buckling load and non-dimensional natural frequency are obtained. It can be seen that the non-dimensional natural frequency and critical buckling load decreases with increasing of ${\beta}$ for UD, USFG and SFG micro-composite beam and vice versa for ${\alpha}$. Also, it is shown that at the specified value of ${\alpha}$ and ${\beta}$, the dimensionless natural frequency and critical buckling load for SGT beam is more than for the other state. Moreover, it can be observed from the results that employing magnetic field in longitudinal direction of the micro-composite beam increases the natural frequency and critical buckling load. On the other hands, by increasing the imposed magnetic field significantly increases the stability of the system that can behave as an actuator.

On eliminating electrochemical impedance signal noise using Li metal in a non-aqueous electrolyte for Li ion secondary batteries

  • Park, Chul-Wan
    • Carbon letters
    • /
    • 제12권3호
    • /
    • pp.180-183
    • /
    • 2011
  • Li metal is accepted as a good counter electrode for electrochemical impedance spectroscopy (EIS) as the active material in Li-ion and Li-ion polymer batteries. We examined the existence of signal noise from a Li-metal counter quantitatively as a preliminary study. We suggest an electrochemical cell with one switchable electrode to obtain the exact impedance signal of active materials. To verify the effectiveness of the switchable electrode, EIS measurements of the solid electrolyte interphase (SEI) before severe $Li^+$ intercalation to SFG6 graphite (at > ca. 0.25 V vs. Li/$Li^+$) were taken. As a result, the EIS spectra without the signal of Li metal were obtained and analyzed successfully for the following parameters i) $Li^+$ conduction in the electrolyte, ii) the geometric resistance and constant phase element of the electrode (insensitive to the voltage), iii) the interfacial behavior of the SEI related to the $Li^+$ transfer and residence throughout the near-surface (sensitive to voltage), and iv) the term reflecting the differential limiting capacitance of $Li^+$ in the graphite lattice.