• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3151-3157
• /
• 2021

Copper is an important structural material in various nuclear energy applications, therefore the correct knowledge of copper cross sections is crucial. The presented paper deals with a validation of different copper transport libraries by means of activation of selected samples. An intense ²⁵²Cf(sf) source with a reference neutron spectrum was used as a neutron source. After irradiation, the samples were measured using a high purity germanium detector and the dosimeter reaction rates were inferred. These experimental data were compared with MCNP6 calculations using CENDL-3.1, JENDL-4.0, ENDF/B-VII.1, ENDF/B-VIII.0, JEFF-3.2 and JEFF-3.3 evaluated Cu transport libraries. The experiment specifically focuses on ⁵⁸Ni(n,p)⁵⁸Co, ⁹³Nb(n,2n)^92mNb, ¹⁹⁷Au(n,g)¹⁹⁸Au and ⁵⁵Mn(n,g)⁵⁶Mn dosimetry reactions. Evaluated activation cross sections of these dosimetric reactions were taken from the IRDFF-II library. The best library performance depends on the energy region of interest.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.218-221
• /
• 2010

'Anyu', a perilla (Perilla frutescens (L.) Britton) cultivar for edible seed was developed by the Department of Functional Crop Science, National Institute of Crop Science, RDA in 2008. It was originated from the cross between a pedigree of YCPL1824 as a female and SF9225-3-1 as a male parent in 1998. 'Anyu' can be characterized by purple flower color and brown grain color. 'Anyu' showed semi-dwarft type with 120 cm height, and has lodging tolerance. Maturing date of 'Anyu' was September 24, which is 15 days faster than that of 'Saeyeopsil'. The early maturity of this new cultivar showed a great advantage to various planting system with other crops. This new cultivar has high oil content (45%) and high linolenic acid in the fatty acid composition. The yield potential of 'Anyu' was about 0.9 ton/1ha in the regional yield trial.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.403-409
• /
• 2001

A novel strain of SFO41 producing a large amount of cholesterol oxidase as an extracellular enzyme isolate from Korean salt fermented foods. The strain was identified as Bacillus megaterium based on morphological, cultural and physiological characteristics. Experiments were carried out to optimized the condition of cholesterol oxidase production using B. megaterium SFO41. B. megaterium SFO41 was shown to give the maximum yield of cholesterol oxidase in the medium containing 2.0% glucose, 0.5% yeast extract. 0.03% $MgSO_4{\cdot}7H_2O,\;0.02%\;K_2HPO_4,\;0.2%\;NH_4NO_3$ and 0.2% cholesterol. The optimum culture conditions, temperature, initial pH and agitation speed were $30^{\circ}C$, 7.0 and 150 rpm, respectively. The enzyme production reached a maximum level at 24 hr of cultivation (2.37 U).

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.245-253
• /
• 2009

The importance of chloride ions in the corrosion of steel in concrete has led to the concept for chloride threshold level (CTL). The CTL can be defined as the content of chlorides at the steel depth that is necessary to sustain local passive film breakdown and hence initiate the corrosion process. Despite the importance of the CTL, due to the uncertainty determining the actual limits in various environments for chloride-induced corrosion, conservative values such as 0.4% by weight of cement or 1.2 kg in 1 $m^3$ concrete have been used in predicting the corrosion-free service life of reinforced concrete structures. The paper studies the CTL for blended cement concrete by comparing the resistance of cementitious binder to the onset of chloride-induced corrosion of steel. Mortar specimens were cast with centrally located steel rebar of 10 mm in diameter using cementitious mortars with ordinary Portland cement (OPC) and mixed mortars replaced with 30% pulverized fuel ash (PFA), 60% ground granulated blast furnace slag (GGBS) and 10% silica fume (SF), respectively, at 0.4 of a free W/B ratio. Chlorides were admixed in mixing water ranging 0.0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0, 2.5 and 3.0% by weight of binder(Based on $C1^-$). Specimens were curd 28 days at the room temperature, wrapped in polyethylene film to avoid leaching out of chloride and hydroxyl ions. Then the corrosion rate was measured using the polarization resistance method and the order of CTL for binder was determined. Thus, CTL of OPC, 60%GGBS, 30%PFA and 10%SF were determined by 1.6%, 0.45%, 0.8% and 2.15%, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.3
• /
• pp.22-30
• /
• 2010

This paper proposes a combination system of Adaptive Modulation and Coding (AMC) and Multiple Input Multiple Output (MIMO), which improves the throughput and has a better reliability. In addition, the system includes Precoding, Antenna Subset Selection and MIMO Mode Selection scheme. Finally, we make a performance analysis of the proposed system. The principal environmental parameters for the simulation experiment consist of a frequency non-selective rayleigh fading channel and a Spreading Factor (SF) of 16. Other parameters may be included in order to fulfill the requirements of the HSDP A Standard. The proposed system has a higher throughput and more reliability than the conventional system, which does not include MIMO Mode Selection scheme, Precoding or Antenna Subset Selection. According to the simulation results, the proposed system reaches the maximum throughput at 8dB, presentlng an improvement of 6dB and twice higher throughput, respect to the conventional system. Specifically, at the point of -6dB, the conventional system reaches 2.5Mbps, while the proposed system reaches 6.4Mbps at the same SNR. Also, at the point of 2dB, each system reaches 7.5Mbps (conventional system) and 15.3Mbps (proposed system), with near twice the difference. According to the results exposed above, we can conclude that the system proposed in this paper has, as the greatest contribution, the improvement of the throughput, especially, the average throughput.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.4
• /
• pp.252-257
• /
• 1991

In a two-year's field experiment, the effectiveness of magnesium-and boron-enriched complex fertilizer (CF, N-P$_2$O$_{5}$-K$_2$O-MgO-B$_2$O$_3$: 14-10-12-3-0.2) on the maintenance and management of hilly pasture was studied. The effects of CF and some straight fertilizers (SF) on forage yields, yield components, and chemical compositions were compared in a mixed grass-clover (orchardgrass, tall fescue, kentucky bluegrass, and ladino clover) and a pure grass (orchardgrass) swards. The results are summarized as follows: 1. Considerably higher average dry matter yields were obtained in the CF plots than in the SF plots. In the mixed sward, the yields of whole mixed forages were inclosed by 10.8-14.5%, grasses by 11%, and legume by 21.5-31.0% by the use of the CF over the use of SF. In the pure grass sward, the yield of grasses was increased by 7.0-21.8%. 2. The rates of yield increase due to the application of CF were dependent on such factors as types of sward (pure or mixed), application rates of NPK, and forage species. The increase of forage yields due to the CF was greater at the normal rate of NPK application than at lower application rate, and in legume forage than in grass forage. 3. The crude fiber, crude fat and NFE contents of forages were not significantly changed by different treatments. However, the forage of CF plot at the normal application rate of NPK contained relatively higher amount of crude protein and crude fat compared with the forages of other plots. 4. There were no significant differences in the contents of mineral nutrients in forages among the different treatments. In spite of the application of Mg-enriched CF, the contents of Mg in soils and forages were below the optimum level.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.8-12
• /
• 1974

1. If one unity is given to the prongs whose ends touch each other for estimating the internal stresses occuring in it, the internal stresses which are developed in the open prongs can be evaluated by the ratio to the unity. In accordance with the above statement, an equation was derived as follows. For employing this equation, the prongs should be made as shown in Fig. I, and be measured A and B' as indicated in Fig. l. A more precise value will result as the angle (J becomes smaller. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ where A is thickness of the prong, B' is the distance between the two prongs shown in Fig. 1 and CH is the value of internal stress expressed by percentage. It precision is not required, the equation can be simplified as follows. $CH=\frac{A-B'}{A}{\times}200%$ 2. Under scheduled drying condition III the kiln, when the weight of a sample board is constant, the moisture content of the shell of a sample board in the case of a normal casehardening is lower than that of the equilibrium moisture content which is indicated by the Forest Products Laboratory, U. S. Department of Agriculture. This result is usually true, especially in a thin sample board. A thick unseasoned or reverse casehardened sample does not follow in the above statement. 3. The results in the comparison of drying rate with five different kinds of wood given in Table 1 show that the these drying rates, i.e., the quantity of water evaporated from the surface area of I centimeter square per hour, are graded by the order of their magnitude as follows. (1) Ginkgo biloba Linne (2) Diospyros Kaki Thumberg. (3) Pinus densiflora Sieb. et Zucc. (4) Larix kaempheri Sargent (5) Castanea crenata Sieb. et Zucc. It is shown, for example, that at the moisture content of 20 percent the highest value revealed by the Ginkgo biloba is in the order of 3.8 times as great as that for Castanea crenata Sieb. & Zucc. which has the lowest value. Especially below the moisture content of 26 percent, the drying rate, i.e., the function of moisture content in percentage, is represented by the linear equation. All of these linear equations are highly significant in testing the confficient of X i. e., moisture content in percentage. In the Table 2, the symbols are expressed as follows; Y is the quantity of water evaporated from the surface area of 1 centimeter square per hour, and X is the moisture content of the percentage. The drying rate is plotted against the moisture content of the percentage as in Fig. 2. 4. One hundred times the ratio(P%) of the number of samples occuring in the CH 4 class (from 76 to 100% of CH ratio) within the total number of saplmes tested to those of the total which underlie the given SR ratio is measured in Table 3. (The 9% indicated above is assumed as the danger probability in percentage). In summarizing above results, the conclusion is in Table 4. NOTE: In Table 4, the column numbers such as 1. 2 and 3 imply as follows, respectively. 1) The minimum SR ratio which does not reveal the CH 4, class is indicated as in the column 1. 2) The extent of SR ratio which is confined in the safety allowance of 30 percent is shown in the column 2. 3) The lowest limitation of SR ratio which gives the most danger probability of 100 percent is shown in column 3. In analyzing above results, it is clear that chestnut and larch easly form internal stress in comparison with persimmon and pine. However, in considering the fact that the revers, casehardening occured in fir and ginkgo, under the same drying condition with the others, it is deduced that fir and ginkgo form normal casehardening with difficulty in comparison with the other species tested. 5. All kinds of drying defects except casehardening are developed when the internal stresses are in excess of the ultimate strength of material in the case of long-lime loading. Under the drying condition at temperature of $170^{\circ}F$ and the lower humidity. the drying defects are not so severe. However, under the same conditions at $200^{\circ}F$, the lower humidity and not end coated, all sample boards develop severe drying defects. Especially the chestnut was very prone to form the drying defects such as casehardening and splitting.

• Imaging Science in Dentistry
• /
• v.33 no.3
• /
• pp.143-149
• /
• 2003

Purpose: To investigate the radiosensitivity of the normal human oral keratinocytes (NHOK), and the effect of irradiation on cell cycle and protein expression. Materials and Methods: To evaluate the radiosensitivity of NHOK, the number of colonies and cells were counted after irradiation and the SF2 (survival fraction at 2Gy) value, and the cell survival curve fitted on a linear-quadratic model were obtained. LDH analysis was carried out to evaluate the necrosis of NHOK at 1, 2, 3, and 4 days after 2, 10, and 20 Gy irradiation. Cell cycle arrest and the induction of apoptosis were analyzed using flow cytometry at 1, 2, 3, and 4 days after 2, 10, and 200y irradiation. Finally, proteins related cell cycle arrest and apoptosis were analysed by Western blot. Results: The number of survived cell was significantly decreased in a dose-dependent manner. The cell survival curve showed SF2, α, and β values to be 0.568, 0.209, and 0.020 respectively. At 200y irradiated cells showed higher optical density than the control group. After irradiation, apoptosis was not observed but G2 arrest was observed in the NHOK cells. 1 day after 10 Gy irradiation, the expression of p53 remained unchanged, the p2l/sup WAF1/Cipl/ increased and the mdm2 decreased. The expression of bax, bcl-2, cyclin B1, and cyclin D remained unchanged. Conclusion: These results indicate that NHOK responds to irradiation by G2 arrest, which is possibly mediated by the expression of p21/sup WAFl/Cipl/, and that cell necrosis occurs by high dose irradiation.

• International Journal of Oral Biology
• /
• v.31 no.2
• /
• pp.53-65
• /
• 2006

Calcium concentration in the bone resorption lacunae is high and is in the mM concentration range. Both osteoblast and osteoclast have calcium sensing receptor in the cell surface, suggesting the regulatory role of high extracellular calcium in bone metabolism. In vitro, high extracellular calcium stimulated osteoclastogenesis in coculture of mouse osteoblasts and bone marrow cells. Therefore we examined the genes that were commonly regulated by both high extracellular calcium and $1,25(OH)_2vitaminD_3(VD3)$ by using mouse oligo 11 K gene chip. In the presence of 10 mM $[Ca^{2+}]e$ or 10 nM VD3, mouse calvarial osteoblasts and bone marrow cells were co-cultured for 4 days when tartrate resistant acid phosphatase-positive multinucleated cells start to appear. Of 11,000 genes examined, the genes commonly regulated both by high extracellular calcium and by VD3 were as follows; 1) the expression of genes which were osteoclast differentiation markers or were associated with osteoclastogenesis were up-regulated both by high extracellular calcium and by VD3; trap, mmp9, car2, ctsk, ckb, atp6b2, tm7sf4, rab7, 2) several chemokine and chemokine receptor genes such as sdf1, scya2, scyb5, scya6, scya8, scya9, and ccr1 were up-regulated both by high extracellular calcium and by VD3, 3) the genes such as mmp1b, mmp3 and c3 which possibly stimulate bone resorption by osteoclast, were commonly up-regulated, 4) the gene such as c1q and msr2 which were related with macrophage function, were commonly down-regulated, 5) the genes which possibly stimulate osteoblast differentiation and/or mineralization of extracellular matrix, were commonly down-regulated; slc8a1, admr, plod2, lox, fosb, 6) the genes which possibly suppress osteoblast differentiation and/or mineralization of extracellular matrix, were commonly up-regulated; s100a4, npr3, mme, 7) the genes such as calponin 1 and tgfbi which possibly suppress osteoblast differentiation and/or mineralization of extracellular matrix, were up-regulated by high extracellular calcium but were down-regulated by VD3. These results suggest that in coculture condition, both high extracellular calcium and VD3 commonly induce osteoclastogenesis but suppress osteoblast differentiation/mineralization by regulating the expression of related genes.

• Journal of the Korean Society of Costume
• /
• v.64 no.3
• /
• pp.108-125
• /
• 2014

The purpose of this study is to provide the basic information necessary to develop sports uniform design by comparing and analyzing the color features and images of professional football uniforms in Korea and foreign countries. The subjects of this study were limited to 5 top leagues in Europe (Premier League, Primera Liga, Bundesliga, Serie A, and Ligue 1) as well as J-League, and K-League. This study was done using the 2012/2013 season home and away uniforms for European leagues and 2013 season home and away uniforms for Korean and Japan leagues. Using the Adobe photoshop CS2 eyedropper tool, color chips and RGB values were extracted from digital images and converted into HV/C of Munsell Conversion. Finally, a total of 735 colors were used for the analysis. The color image scale by Shigenobu Kobayashi was used to position the color images. The results are as follows. First, the color analysis of professional football uniforms in leagues suggested that chromatic color (53.7%) was more prevalent than achromatic color (46.3%). The two most common colors of the ten chromatic colors were R(19.7%) and PB(18.0%), followed by Y(5.4%), RP(2.0%), G(1.9), GY(1.8%), B(1.6%), YR(1.5%), P(1.1%), and BG(0.7%). Second, for the color tone comparison and analysis of professional football uniforms in leagues, the most commonly used color tone was W(28.4%), followed by v(25.5%), Bk(16.3%), s(5.8%), dk(5.2%), b/lt(5.2%), dp(3.0%), sf(2.0%), ltGy(1.0%), p(0.5%), G/dkGy(0.4%), and ltg/mGy (0.1%). Third, for the comparison and analysis of color and color tone of professional football uniforms in leagues, W(28.4%), R(v)(17.7%), and Bk(16.3%) were commonly used. Finally, for the comparison and analysis of color images of professional football uniforms in leagues, the most commonly used color image was a casual image(31.8%), followed by modern image(26.5%), dynamic12.8%), cool casual(12.0%), gorgeous(9.3%), clear(6.6%), chic(3.5%), and elegant images. Dandy, classical, romantic and pretty images(0.4% respectively) were also used.