• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2015년도 추계학술발표대회
• /
• pp.372-374
• /
• 2015

최근 가전제품, 모바일 장비, 웨어러블 컴퓨터 등의 IoT 분야에서 센서 정보를 주고 받는 직렬 통신 방식이 사용된다. 기존의 SPI와 I2C 직렬 통신 방식은 클럭과 데이터 2개의 핀을 사용하여 비교적 빠른 속도로 데이터를 전송하는 방식이다. 사용되는 사물들이 점차 작아지고, 데이터 전송 정보의 양이 적어지면서 전송 속도보다는 하드웨어의 단순화가 중요한 설계요소가 되는 응용분야가 늘어나고 있다. 본 논문에서는 단일 핀을 사용하여, 데이터를 직렬로 송 수신하는 회로를 설계하고 FPGA로 구현하였다. 제안된 단일 핀 직렬 통신 프로토콜은 적은 양의 데이터를 저속으로 통신하는 IoT 제품에 적합하다.

• 한국환경과학회지
• /
• 제30권3호
• /
• pp.279-287
• /
• 2021

In this study, the composition and morphology of deposited dust particles with size ranging from a few to tens ㎛ were investigated using SEM/EDX (scanning electron microscopy with energy dispersive x-ray spectrometer). Then deposited dust particles were classified into 8 groups: quartz, aluminosilicates, ca-rich, Fe/Ti oxide, carbon-rich, industrial particle, Fe-rich, and biogenic particle. The sources of deposited dust were high in the order of aluminosilicates 41% > biogenic 18% > Fe-rich 11% > quartz and C-rich 8% > industrial 7% > Fe/Ti oxide 5% > Ca-rich 1%. In particular, the ratio of biogenic particles was relatively high due to influence of pollen. The ratio of carbon-rich was 11% at YM site, 10% at MD site, and 4% at MO site, and the site close to the large emission source was high.

• Applied Microscopy
• /
• 제52권
• /
• pp.12.1-12.8
• /
• 2022

The microstructure of diatom frustules found in mud sediments along the coast of Boryeong- city, South Korea, was observed using a scanning electron microscopy (SEM), and the constituent elements of diatoms were analyzed using energy-dispersive X-ray spectroscopy (EDS). Diatom frustules and clay minerals were present in the SEM images of the mud powder. High-magnification SEM images revealed that the surface of the frustules contained identically shaped circular pores, measuring 1 ㎛ in diameter, arranged at regular intervals. This study revealed that the diatom shell fragments in the mud powder ranged in size from 3 to 30 ㎛, with an average thickness of approximately 2.5 ㎛. The elements Si, Al, Fe, K, Na, Mg, and Ti were detected while analyzing the frustule constituents, with Si being the primary component with the highest content.

• International Journal of Quality Innovation
• /
• 제8권1호
• /
• pp.76-86
• /
• 2007

This paper reports on a study investigating key attributes of service recovery strategies in internet shopping mall. In theses day, service recovery has received important attention in the service operation management literature. Service recovery involves those actions designed to resolve problems, alter negative attitudes of dissatisfied consumers and to ultimately retain these customers. The study examined that service recovery strategies (apology, compensation) impact on the customer satisfaction. And customer satisfaction impacts on customer loyalty with SEM (Structural Equation Modeling). This study can be used a strategic implication for internet shopping mall managers to develop successful service recovery strategies.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 춘계학술대회 논문집
• /
• pp.144-145
• /
• 2008

• 한국콘텐츠학회논문지
• /
• 제12권2호
• /
• pp.461-471
• /
• 2012

본 논문의 목적은 공간적탐색기법을 이용한 부산 주택시장 다이나믹스 분석으로써 MATLAB toolbox M-file을 이용하였다. 본 연구에서 사용된 자료는 2006년부터 2009년 2분기까지 공개된 부산지역 아파트 실거래가 64,530개 자료를 기준으로 법정동을 분류하여 각 평균값을 분석에 이용하였다. 주택시장분석에 많이 이용되는 헤도닉가격 모형은 도시주택경제 분야에서 주택시장 다이나믹스를 설명하는데 강력한 분석기법의 하나이다. 그럼에도 불구하고 전통적인 헤도닉가격 모형은 공간적자기상관의 영향력을 반영하지 않는 단점이 있다. 따라서 본 논문에서는 공간자기상관 관계를 반영한 다양한 공간계량모형, 예를 들어, 공간자기회귀모형(SAR), 공간오차모형(SEM), 일반공간모형(SAC) 등을 보통최소자승법을 이용한 전통적 헤도닉가격 모형과 비교하고자 한다. 이를 위해 결정계수($R^2$), 분산(${\sigma}^2$), 우도함수(Likelihood)의 값 등의 지표들을 이용하였다. 분석결과 공간자기상관을 고려한 공간계량모형이 전통적 헤도닉모형에 비해 높은 설명력을 보여주고 있다. 공간계량모형에서는 공간오차모형(SEM)과 일반공간모형(SAC)이 공간자기회귀모형(SAR) 보다 우수한 설명력을 보이고 있다.

• 한국수소및신에너지학회논문집
• /
• 제16권3호
• /
• pp.238-243
• /
• 2005

Mg and Mg-based alloys are most important hydrogen storage materials. It is a lightweight and low-cost materials with high hydrogen storage capacity. However, the formation of hydride at high temperature, the deterioration effect, the hydriding and dehydriding kinetics are bad factor for application. In this study, Mg and Ni have been produced by hydrogen induced mechanical alloying(HIMA) process. The raw materials, Mg(purity 99.9%) chip and Ni(purity 99.95%) chip was prepared by using a planetary ball mill apparatus(FRITSCH pulverisette 5). The balls to chips mass ratio(BCR) are 30:1. The hydrogen pressure induced 2.0MPa and milling times were 12, 24, 48, 72, 96 hours with a rotating speed of 200rpm. X-ray diffraction(XRD) analysis was made to characterize the crystallite size and misfit strain. The crystallite size measured by laser particle size analysis(PSA). Microstructure changes were investigated by scanning electron microscopy(SEM) and the transmission electron microscopy(TEM). The hydrogen storage properties were evaluated by using an Sivert's type automatic pressure-composition-therm(PCT) apparatus.

• Applied Microscopy
• /
• 제42권2호
• /
• pp.111-114
• /
• 2012

The scanning electron microscopy is an ideal technique for examining plant surface at high resolution. Most hydrate samples, however, must be fix and dehydrate for observation in the scanning electron microscope. Because the microscopes operate under high vacuum, most specimens, especially biological samples, cannot withstand water removal by the vacuum system without morphological distortion. Cryo-techniques can observe in their original morphology and structure without various artifacts from conventional sample preparation. Rapid cooling is the method of choice for preparing plant samples for scanning electron microscopy in a defined physiological state. As one of cryo-technique, high-pressure freezing allows for fixation of native non-pretreated samples up to $200{\mu}M$ thick and 2 mm wide with minimal or no ice crystal damage for the freezing procedure. In this study, we could design to optimize structural preservation and imaging by comparing cryo-SEM and convention SEM preparation, and observe a fine, well preserved Arabidopsis stem's inner ultrastructure using HPF and cryo-SEM. These results would suggest a useful method of cryo-preparation and cryo-SEM for plant tissues, especially intratubule and vacuole rich structure.

• Journal of the Korean Wood Science and Technology
• /
• 제36권3호
• /
• pp.17-23
• /
• 2008

목재의 수축거동을 짧은 시간 내에 세포수준에서 관찰하기 위하여 목재를 함수상태로 관찰할 수 있는 저진공 주사전자현미경(Low-Vacuum Scanning Electron Microscopy)의 경통 내에서 습윤상태의 소형시편을 탈습시켜 건조시키면서 횡단면에서의 목재수축거동을 관찰하였다. 또한 동일한 개체에서 수축율 시험편을 제작하여 실제목재의 수축율을 측정하여 비교하였다. 경통 내의 탈습은 약 20여 분 정도에 완료되어 짧은 시간 내에 목재의 수축과정을 관찰하는 것이 가능하였으며, 수축율 시험편의 수축율과 현미경 내의 탈습에 의한 소시험편의 수축율은 비슷하였다. 목재의 수축율에 기여하는 춘재와 추재의 수축율에 대한 개개의 관찰이 가능하였으며 양자의 수축량은 거의 비슷하게 나타나는 것을 알 수 있었다. 목재의 수축과 세포벽수준에서의 수축을 비교해보면, 목재의 수축은 춘재보다 추재에 의해 좌우되는 사실을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1288-1293
• /
• 2007

The present study covers the design and analysis of a thermionic scanning electron microscope (SEM) column. The SEM column contains an electron optical system in which electrons are emitted and moved to form a focused beam, and this generates secondary electrons from the specimen surfaces, eventually making an image. The electron optical system mainly consists of a thermionic electron gun as the beam source, the lens system, the electron control unit, and the vacuum unit. In the design process, the dimension and capacity of the SEM components need to be optimally determined with the aid of finite element analyses. Considering the geometry of the filament, a three-dimensional (3D) finite element analysis is utilized. Through the analysis, the beam emission characteristics and relevant trajectories are predicted from which a systematic design of the electron optical system is enabled. The validity of the proposed 3D analysis is also discussed by comparing the directional beam spot radius. As a result, a prototype of a thermionic SEM is successfully developed with a relatively short time and low investment costs, which proves the adoptability of the proposed 3D analysis.