• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.522-525
• /
• 2004

ITO thin films $({\sim}150\;nm)$ are deposited on glass substrates by different deposition condition. The sheet resistance of ITO thin films measured by using a four probe station. The microstructure of these films is determined using a X-ray diffractometer (XRD) and a scanning electron microscope (SEM) and a atomic force microscope (AFM). The sheet resistance of ITO thin films compared $s_{11}$ values by using a near field scanning microwave microscope.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1042-1045
• /
• 2004

ITO thin films ($\sim150nm$) are deposited on glass substrates by different deposition condition. The sheet resistance of ITO thin films measured by using a four probe station. The microstructure of these films is determined using a X-ray diffractometer (XRD) and a scanning electron microscope (SEM) and a atomic force microscope (AEM). The sheet resistance of ITO thin films compared $s_11$ values by using a near field scanning microwave microscope.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.937-938
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.333-334
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.621-622
• /
• 2008

• Plant Journal
• /
• v.16 no.3
• /
• pp.47-52
• /
• 2020

This study investigated the methodologies to enhance the corrosion resistance and the ways to measure for subsea equipment made of aluminum. The methodologies for the anticorrosion were cathodic protection, conversion coating, anodizing and organic coating. The simply analyzed ways to measure the corrosion resistance were Scanning Electron Microscope (SEM), Electrochemical Impedance Spectroscopy (EIS), Glow discharge optical emission spectrum spectroscopy (GD-OES), Fourier Transform Infrared Spectroscopy (FT-IR), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), Scanning Vibrating Electrode Technique (SVET), contact angle and interfacial tension. The most widely used tools for increasing the corrosion resistance were the anodizing and the organic coating. Many ways were evenly used to measure corrosion. The methods more frequently utilized were SEM for the surface investigation and the contact angle to evaluate the corrosion resistance.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.2
• /
• pp.87-93
• /
• 1999

Under Light and Scanning electron microscope, the pupal morphology of mulberry silkworm Bombyx mori Linn. revealed the prothorax and metathorax, well developed mesothorax, less defined last pair of sporacle, well exposed prothoracic femora and wing pads approaching the anterior margin of Ab III. The important sex separating characters viz, wegiht, antennal elevations, intersegmental lines and genings have discussed. Further, two separate openings bursa copulatrix and ovipositional opening were observed, performing different functions in abult moth.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.107.2-107.2
• /
• 2014

다양한 산업분야에서의 급격한 Packing Density 증가 추세로 인하여 영상분석기기 분야도 기술적으로 매우 진보되어왔다. 특히 전자현미경(SEM : Scanning Electron Microscope)은 반도체, 디스플레이 및 부품 소재의 고집적화와 더불어 기술의 발전 속도가 빠르게 이루어지고 있으며, 매우 고도화 되고 있다. 이에 따른 다양한 응용분야에서 전자현미경의 수요도 꾸준히 증가되고 있는 추세이다. 그러나 기초 과학기술을 기반으로 하는 전자현미경 산업분야는 높아진 국내 수요대비 자체 기술 발전이 미약한 실정이다. 이러한 현실속에서 국내 기술력으로 FE-SEM을 개발하였고 상용화를 눈앞에 두고 있다. 국산화된 FE-SEM은 Outer Lens방식으로 Schottky cathode와 60o conical Lens를 적용하여 고분해능을 구현함과 동시에 Scan generator, Auto-stepping및 Retarding 기능들도 추가 장착하여 제품경쟁력을 극대화 하고자 하였다. 본 발표는 개발된 FE-SEM의 기술적 특징과 개발 과정 및 결과를 소개하고자 하였다. 또한 해외 경쟁사들의 선행 기술동향 대비 현재 국내 기술 수준을 비교하여 향후 나아갈 방향을 고찰하고자 하였으며, 이를 기반으로 진행 중에 있는 초 저-가속전압 및 Semi In-Lens Optic구현을 위한 국내 기술개발 추진 현황도 간략하게 논하고자 한다. 이러한 고찰을 통하여 해외 선진 경쟁사 대비 후 발업체로써 낙후되어있는 국내기술의 격차를 빠르게 좁혀 나아가고 Global 경쟁력을 갖춘 제품을 구현하기 위하여 국내 전문가들과의 협력을 통한 선행 요소기술 및 차별화된 제품기술 확보 방법을 강구하고자 한다.

• Composites Research
• /
• v.28 no.1
• /
• pp.1-5
• /
• 2015

In this paper the influence of fiber orientation of basalt and carbon inter-ply fabrics on the flexural properties of hybrid composite laminates was experimentally investigated. Four types of basalt/carbon/epoxy inter-ply hybrid composite laminates with varying angle ply orientation of reinforced basalt fiber and fixed orientation of carbon fiber were fabricated using hand lay-up technique. Three point bending test was performed according to ASTM 7264. The fracture surface analysis was carried out by scanning electron microscope (SEM). The results obtained from the four laminates were compared. Lay-up pattern of $[0B/+30B/-30B/0C]_S$ exhibits the best properties in terms of flexural strength and flexural modulus. Scanning electron microscopy results on the fracture surface showed that the interfacial de-bonding between the fibers and epoxy resin is a dominant fracture mode for all fiber lay-up schemes.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.199-204
• /
• 2009

Silicone dioxide absorbed polyoxyethylene alkylether sulfate (EU-S133D) surfactant was prepared. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 2.0 wt% EU-S133D, silicone dioxide/Acrylate core-shell polymerization was carried out on the surface of silicone dioxide particle without forming the new silicone dioxide particle during acrylate shell polymerization in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by scanning electron microscope(SEM).