• 제목/요약/키워드: SED2D model

검색결과 30건 처리시간 0.02초

Watershed Erosion Modeling with CASC2D-SED

  • Pierre Julien;Rosalia Rojas
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2002년도 학술발표회 논문집(I)
    • /
    • pp.27-40
    • /
    • 2002
  • Developed at Colorado State University, CASC2D-SED is a physically-based model simulating the hydrologic response of a watershed to a distributed rainfall field. The time-dependent processes include: precipitation, interception, infiltration, surface runoff and channel routing, upland erosion, transport and sedimentation. CASC2D-SED is applied to Goodwin Creek, Mississippi. The watershed covers 21 $\textrm{km}^2$ and has been extensively monitored both at the outlet and at several internal locations by the ARS-NSL at Oxford, MS. The model has been calibrated and validated using rainfall data from 16 meteorological stations,6 stream gaging stations and 6 sediment gaging stations. Sediment erosion/deposition rates by size fraction are predicted both in space and time. Geovisualization, a powerful data exploration technique based on GIS technology, is used to analyze and display the dynamic output time series generated by the CASC2D-SED model.

  • PDF

SED2D모형을 이용한 저수지 퇴사거동 모의-모의시간간격의 민감도를 중심으로 (Simulation of Sediment Deposition Behavior in a Reservoir using a SED2D model: Focusing on Sensitivity of Simulation Time Step)

  • 김대근
    • 상하수도학회지
    • /
    • 제26권1호
    • /
    • pp.87-95
    • /
    • 2012
  • In this study, the following conclusions were obtained from an investigation of the effect of the simulation time step on the simulation results of the two-dimensional, vertically averaged sediment transport model SED2D and an analysis of the deposited sediment distribution in suspended sediments of reservoirs according to grain size. The simulation time step has a significant effect on the deposited sediment distribution in a reservoir. In particular, if the simulation time step is set to be excessively large, physically invalid results are obtained. Additionally, in order to determine an appropriate simulation time step for SED2D, the selection of a simulation time step that will allow the analysis of the suspended sediment concentration profile at the main points of the simulation domain is necessary. The deposited sediment distribution in a reservoir according to grain size, including suspended sediments of clay, silt, and sand, was successfully simulated. Such information will prove valuable in application to the establishment of efficient management and reduction measures of reservoir sediment deposits.

Criterion for judging seismic failure of suspen-domes based on strain energy density

  • Zhang, Ming;Parke, Gerry;Tian, Shixuan;Huang, Yanxia;Zhou, Guangchun
    • Earthquakes and Structures
    • /
    • 제15권2호
    • /
    • pp.123-132
    • /
    • 2018
  • In this paper the strain energy density (SED) model is used to analyze the seismic behavior of suspen-domes and a new criterion is established for judging the seismic failure based on a characteristic point in the SED model. Firstly, a nonlinear time-history response analysis was carried out using the finite-element package ANSYS for typical suspen-domes subjected to different ground motions. The seismic responses including nodal displacements, ratios of yielding members, strain energy density and structural maximum deformation energy were extracted corresponding to the increasing peak ground acceleration (A). Secondly, the SED sum ($I_d$) was calculated which revealed that the $I_d-A$ curve exhibited a relatively large change (called a characteristic point) at a certain value of A with a very small load increment after the structures entered the elastic-plastic state. Thirdly, a SED criterion is proposed to judge the seismic failure load based on the characteristic point. Subsequently, the case study verifies the characteristic point and the proposed SED criterion. Finally, this paper describes the unity and application of the SED criterion. The SED method may open a new way for structural appraisal and the SED criterion might give a unified criterion for predicting the failure loads of various structures subjected to dynamic loads.

댐 건설이 하류하천 하상에 미치는 영향 분석 (Influence Analysis for Natural River Bed with Dam Construction)

  • 추태호;채수권
    • 한국습지학회지
    • /
    • 제14권4호
    • /
    • pp.715-723
    • /
    • 2012
  • 낙동강의 지류인 내성천의 회룡포는 섬 안의 섬으로 불리는 모래 백사장을 가지고 있는 매우 잘 알려진 관광명소이다. 그러나 상류 지역 댐의 건설이 계획되었다. 따라서 상류로 부터의 유사 유입이 차단되게 되었다. 이러한 상황에서 내성천의 지류로부터 유입되는 유사량 등을 통하여 회룡포의 모래 백사장에 미치는 영향을 1차원 및 2차원 모형을 사용하여 분석하였다. 유량-유사량은 댐의 유지유량과 지류에서 들어오는 유사량의 유역면적비에 의해서 산정된 값을 입력 자료로 활용 하였다. 1차원 모형은 HEC-6 모형을 사용하였고 2차원 모형은 SMS의 SED2D 모형을 사용하여 분석하였다. HEC-6 모형은 10년 전 하상에 데이터를 넣어 현재 하상과 가장 일치하는 공식인 Yang공식을 선정하여 현재 하상으로부터 20년 후를 모의하였다. SED-2D 모형은 현재 하상을 기준으로 20년 후를 모의하였고 두 모형 분석 결과 회룡포 구간에서는 동일한 양상이 나타나는 것으로 확인되었다.

SMS를 이용한 경안천 하류구간의 하천흐름 분석 (Analysis of Hydraulic Characteristics Using SMS RMA2 and SED2D Model in the Downstream of Gyeongan-Cheon)

  • 홍성민;정인균;이준우;김성준
    • 한국지리정보학회지
    • /
    • 제7권1호
    • /
    • pp.94-104
    • /
    • 2004
  • 본 연구는 경안천 하류구간(13.8km)을 대상으로 SMS의 RMA2모형과 SES2D 모형을 이용하여 2002년 경안관측소의 최대홍수위를 기록한 8월 7일의 수리분석을 실시하였다. RMA2모형을 적용하기 위하여 RIMGIS데이터의 하천측량자료를 이용하여 입력자료로 활용하였으며, 생성된 지형자료를 2차원 유한요소망으로 변환하여 모형을 수행하였다. 본 연구에서는 부정류 상태의 모의를 적용하였으며, 모형에 민감하게 반응하는 인자에 대해서는 선행 연구에서 실시한 민감도 분석결과를 고려하였고, 기타 입력인자는 통계연보 및 하천정비계획서를 참고하였다. 또한 대상하천에 SED2D 모형을 적용하여 홍수사상에 대한 하천의 하상 변동에 대한 모의를 실시하였으며, 대상 하천의 홍수시 유속은 0.05~3.85m/s의 분포로 상류와 하류의 큰 차이를 보였고, 하상변화는 0.0003~0.0135m가 발생하였다.

  • PDF

2차원모형을 이용한 소양호의 퇴사분포 예측 (Prediction of Sediment Distribution in Soyang Lake Using two-dimensional Model)

  • 성충현;이봉희;서용권;오규창;김종래
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.1551-1555
    • /
    • 2006
  • 효율적인 댐 운영 및 관리를 위하여 퇴사유입으로 인한 저수용량의 감소에 대한 정량적인 분석이 필수적이다. 본 연구의 대상지인 소양호는 소양강댐이 준공된 1973년을 기준으로 매 10년마다 세부측량을 통한 퇴사량 조사가 실시되고 있다. 기존의 조사에서는 장기적인 퇴사량 예측을 위해 U.S.B.R의 경험적 면적감소법과 90년대 초반부터는 1차원 모형인 HEC-6가 적용되어 왔다. 그러나 기존의 방법은 저수지 내 퇴사의 횡방향 분포는 고려할 수 없다는 단점이 있다. 이를 보완하기 위해 저수지 횡단방향으로의 퇴적과 세굴을 모의할 수 있는 2차원 이상의 모형이 적용되어야 한다. 본 연구에서는 소양호의 장래퇴사분포를 모의하였다. 현재 실무에서 주로 이용되고 있는 HEC-6 모형과 2차원 수치모형인 HSCTM2D(Hydordynamics, Sediment and Contaminant Transport Model)모형 및 SMS-SED2D 모형을 비교한 후 SMS-SED2D 모형을 소양강댐 유역에 적용하였다. 또한 모형의 매개변수 보정을 위하여 퇴사량 조사용역으로 수행된 1983년과 2005년의 실측횡단자료를 이용하였으며, 향후 소양강댐의 관리를 위한 기초자료로의 활용을 위하여 댐 축조후 50년, 100년후의 저수지내 퇴사분포를 모의하였다.

  • PDF

수리구조물 설치에 따른 흐름특성 및 하상변동 연구 (An Assessment of Flow Characteristic and Riverbed Change by Construction of Hydraulic Structure)

  • 곽재원;진환석;김형수
    • 한국습지학회지
    • /
    • 제19권4호
    • /
    • pp.542-550
    • /
    • 2017
  • 흐름특성과 하상변동의 추정은 하천유역 내 수리구조물의 설계 및 유지관리, 홍수터 관리, 하천개수 및 하도의 안정 등을 위한 기본적인 요소이며, 하천관리에 직접적인 영향을 미친다. 이에 본 연구의 목적은 하도 내에 수리구조물 설치에 따른 흐름의 특성과 그에 따른 하상변동을 추정하는 데 있다. 이를 위하여 금강 대청댐 하류부 11.65km 구간을 대상으로 RMA2 모형 및 SED2D 모형을 이용하여 수리구조물의 신설로 인한 흐름특성의 변화와 빈도별 홍수량에 따른 하상변동을 모의하였다. 연구결과, 수리구조물 설치로 인해 상류부에서는 하상 상승, 하류부에서는 보 설치전과 유사한 형태의 침식이 발생하는 것으로 나타났다.

SMS를 이용한 경안천 하류구간의 하천흐름 분석 (Analysis of Hydraulic Characteristics using SMS RMA2 and SED2D Model in the Downstream of Gyeongan-Cheon)

  • 홍성민;정인균;김성준
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2003년도 학술발표논문집
    • /
    • pp.519-522
    • /
    • 2003
  • The purpose of this study is to analyze various hydraulic characteristics using SMS (Surface Water Modelling System) RMA2 model. It is based on 2-D finite element method. River reaches (13.8km) from Gyeongan gauge station to the inlet of Paldang lake was selected. Finite element was made by RIMGIS Data, and the analysis of river-changes was operated by unsteady flow. The sediment concentration and bed change was simulated using SED2D model.

  • PDF

경포천 하도 급확대에 따른 수리학적 영향분석 (Analysis of Hydraulic Impacts due to Sudden Enlargement of Kyungpo-cheon River Channel)

  • 최종호;정태정;전계원
    • 한국방재안전학회논문집
    • /
    • 제12권2호
    • /
    • pp.35-45
    • /
    • 2019
  • 인위적인 하도의 확대 및 축소는 유수의 흐름을 변화시킬 뿐만 아니라 침퇴적 양상에 변화를 가져와 홍수의 원활한 소통에 지장을 초래할 수 있다. 이에 본 연구는 하도의 급확대가 하상의 변화와 하천 흐름의 변화에 미치는 영향을 분석하는데 목적이 있다. 이를 위하여 고향의 강 조성사업으로 하도의 일부 구간이 2~3배 이상 확폭 된 지방하천인 경포천을 대상으로 RMA-2 및 SED-2D모형을 이용하여 하도의 확폭으로 인한 흐름특성의 변화와 하상변동을 모의하였다. 연구결과, 경포천 하도의 확폭은 확폭 전에 비해 치수적 안정성을 확보하고 있는 것으로 나타났으나, 연구대상 구간의 침수빈도는 연중 1회 이상으로 향후 유지관리에 많은 비용과 시간이 필요할 것으로 분석되었다.

댐 저수지의 퇴사위 결정 방법에 관한 연구 (Comparative analysis of methods for sediment level estimation in dam reservoir)

  • 주홍준;김형수;조운기;곽재원
    • 한국수자원학회논문집
    • /
    • 제51권1호
    • /
    • pp.61-70
    • /
    • 2018
  • 본 연구에서는 댐의 효율적인 계획 및 운영을 위해 댐 저수지의 최적 퇴사위 결정 방법에 대해 고찰하였다. 현재 우리나라는 안전한 설계에 의거하여 댐 저수지 사수위 내의 퇴사위 결정 방법은 비교적 높게 산정되는 수평퇴사법을 주로 적용하고 있지만, 댐 저수지의 퇴사위는 정확하게 계획되어야 하며, 이는 댐 생애주기 평가 차원에서도 중요한 요소이다. 댐 저수지의 퇴사위 결정을 위해 대표적인 방법으로는 RMA-2와 연계된 SED-2D의 모형에 의한 방법, 수평퇴사법, 면적증분법(area increment method), 경험적면적감소법(empirical area reduction method)이 있다. 본 연구에서는 최적 퇴사위 결정을 위해 이를 산정하여 2007년 기준 실측 퇴사위와 비교하였다. 또한, 현재 및 미래 퇴사위를 예측하여 각 방법별로 경향과 추이를 분석하였다. 실측 퇴사위와 산정된 퇴사위를 비교한 결과, 경험적면적감소법이 실측값과 가장 근사하게 산정된 것을 확인할 수 있었으며, 현재 및 미래의 퇴사위는 전반적으로 과거 퇴사위의 경향과 추이를 따라가는 것으로 확인되었다. 따라서, 본 연구의 결과를 토대로 보면 경험적 면적감소법의 이용이 적절할 것으로 판단되고, 모형에 의해 분석 결과의 타당성을 검정하는 것이 합리적이라 생각된다.