• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.1001-1010
• /
• 2015

This paper estimates the time-dependent crack-tip stress fields under elastic-plastic-creep conditions. We perform Finite-Element (FE) transient creep analyses for a Single-Edge-notched-Bend (SEB) specimen. We investigate the effect of the initial plasticity on the transient creep by systematically varying the magnitude of the initial step-load. We consider both the same stress exponent and different stress exponent in the power-law creep and plasticity to determine the elastic-plastic-creep behaviour. To estimation of the crack-tip stress fields, we compare FE analysis results with those obtained numerically formulas. In addition, we propose a new equation to predict the crack-tip stress fields when the creep exponent is different from the plastic exponent.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.851-857
• /
• 2015

In this paper, we estimate the time-dependent C(t) integrals under elastic-plastic-creep conditions. Finite-element (FE) transient creep analyses have been performed for single-edge-notched-bend (SEB) specimens. We investigate the effect of the initial plasticity on the transient creep by systematically varying the magnitude of the initial step load. We consider both the same stress exponent and different stress exponents in the power-law creep and plasticity to elastic-plastic-creep behavior. To estimate the C(t) integrals, we compare the FE analysis results with those obtained using formulas. In this paper, we propose a modified equation to predict the C(t) integrals for the case of creep exponents that are different from the plastic exponent.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.3
• /
• pp.202-209
• /
• 2016

This study is aimed to determine the correlation between the toxin gene types and antibiotic resistance from MRSA (methicillin-resistant Staphylococcus aureus). Fifty-two strains of MRSA, between January 2014, and December 2014, were isolated from clinical specimens obtained from 2,664 cases in the intensive care unit of a hospital in Suncheon, Jeonnam, Korea. Genes encoding mecA, enterotoxin (SE), toxic shock syndrome toxin-1 (TSST-1), exfoliative toxin (ET), and Panton-Valentine leukocidin (PVL) were detected by multiplex PCR-mediated amplification using specific primers. Toxin genes (seg and sei) were present in 40 strains (76.9%), followed by tst in 34 strains (65.4%). Other genes (eta, etb, sea, sed, see, seh, sej, and pvl) were not detected. Forty strains (76.9%) of MRSA had 2 or more toxin genes simultaneously; 5 coexistent toxin-genes (seb, sec, seg, sei, tst) were the most common in 28 strains (53.8%), and 6 strains (11.5%) had seg and sei genes. The coexistence of genes were 72.5~100%, showing a high correlation among genes (seb, sec, seg, sei and tst). As strains (seb, sec, tst) that had particular toxin genes (seb, sec, seg, sei, tst) in multiple showed 100% resistance to ciprofloxacin, clindamycin, erythromycin, we were able to find that seb, sec, and tst genes have a close relationship to the aforementioned antibiotics. It showed a higher resistance to ciprofloxacin, clindamycin, erythromycin, and tetracycline compared with strains that had toxin genes independent from multiple toxin genes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3315-3322
• /
• 2015

Staphylococcus aureus is the major causative organism of nasocomial infection being the important pathogen in the clinic. Appearance of staphylococcus aureus resistant to methicillin (MRSA) is becoming a big problem in clinics and dynamics all over the world acquiring antibiotic resistance with virulence factors as its feature differentiated from other pathogenic bacteria fast. This research intended to compare and analyze the correlation of antibiotics resistance between strains with toxin genes and distribution of toxin genes of MRSA 101 strains acquired from clinical specimen in one general hospital (enterotoxin(se), toxic shock syndrome toxin-1(tst), exfoliative toxin(et), Panton Valentine leukocidin(pvl)). seg gene, isolated the most among toxin genes, was detected in 59 strains (58.4%) and more than two toxin genes were detected in 70 strains (69.3%). As a combination possessing toxin genes, it was detected in 19 strains (18.8%) as seb, sec, seg, sei, tst and the second frequent combination was sec, seg, sei shown in 11 strains (10.9%). 19 strains (18.8%) with combinations of toxin genes same with seb, sec, seg, sei, tst had 100% resistance Ampicillin, Benzylpenicillin, Ciprofloxacin, Clindamycin, Gentamicin, Erythromycin, Telithromycin, Tetracycline antibiotics. Strains with many toxin genes showed high correlation of antibiotic resistance. Afterwards, effective therapy and thorough infection management should be preceded not to spread the resistance of MRSA strain.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.823-832
• /
• 2003

To define the causes of cladding degradation which can take place during the operation of nuclear power plants, it is required to develop the new fracture toughness test of spent fuel cladding. The fracture toughness of Zircaloy-4 cladding was estimated using the recently developed KAERI embedded Charpy (KEC) specimen. Axially notched KEC specimens cut directly from unirradiated fuel claddings, were tested in a way similar to the standard toughness test method of a Single Edge Bending (SEB) specimen. The results of KEC fracture toughness test at room temperatures were discussed and compared with those of the previous other studies. In conclusions, even though the KEC fracture toughness test of nuclear fuel claddings was easier and more reliable than those developed earlier, the results from the cladding fracture tests were not the material characteristics but the specific fracture parameters which were deeply related to the specification of claddings. In addition, the phenomenon of a thickness yielding was not observed from the fracture surface. It was closely related to the fact that the plane strain condition of the KEC specimen was changed to the plane stress condition during crack advancing. It was also supported by the fractographic evidence that the formation of ductile dimples at the crack initiation became the similar appearance such as a quasi-cleavage after the sufficient crack advancing.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.81-86
• /
• 2009

Infrared thermography was used to determine the location, size, and depth of defects under the surface of M.C nylon. Defects were created in a specimen by back-drilling circular holes. These defects were located at the maximum temperature difference that occurred. The sizes of the defects could be calculated by means of the full width at half of the maximum temperature difference. The depth of a defect could be calculated by the peak time and the maximum temperature difference. The maximum temperature difference between a defect and normal part was decreased with the depth of the defect. And the peak time also slowly appeared with the depth of the defect.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.2
• /
• pp.72-77
• /
• 2008

The application of infrared thermography for detecting defects under the surface of a material was studied. Defects in a specimen were made by back-drilled circular holes. To get alarge temperature difference at the surface, a halogen lamp was used for surface heating. We confirmed that the defect location had a good relationship with the maximum temperature difference. The sizes of the defects could be calculated by means of the FWHM. The value of the FWHM of a temperature difference decreased with time. Therefore in an extremely short time after the heating, the true defect size could be measured.