• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.219-222
• /
• 2004

This research is about SDM (Structural Dynamics Modification) technique using embosses. SDM using embosses do not need to add additional mass element ana model of embosses and resulting huge calculation for getting analytical solution of an embossed structure. The object of this research is to suggest a method to guide placing embossment in a structure to raise its natural frequencies. Two methods to optimize model with embossing are suggested, indepuldently. The former is response surface analysis by neural network. And the latter is an indirect method using modal dynamic strain energy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.562-562
• /
• 2016

신경망 모형에서 학습이란 주어진 입출력시스템에 대하여 원하는 동작을 수행할 수 있도록 연결 강도를 최적의 상태로 적응(adaptation)시키는 과정을 의미한다. 따라서 강수와 지하수위의 관계를 연계시킨 인공신경망기법은 선택적으로 예측 지하수위에 영향을 미치는 변수들을 학습에 의하여 택함으로써 예측모형을 구성할 수 있다. 즉, 예측 지하수위와의 상관관계에 의하여 입력되는 변수와의 연결강도를 조정하여 매개변수 조정 및 모형의 최적화를 자동화할 수 있다. 본 연구에서는 지하수위에 영향을 주는 요소는 지하수위와 강우량이라고 가정하고, 지하수위의 입출력과정을 시계열 분석에 의하여 모형화하였으며 예측지하수위는 강우 및 지하수위의 선행조건과 매우 밀접한 관계를 갖는다. 따라서 선행강우 및 지하수위의 상태에 따라 이를 입력하여 미래의 지하수위를 예측하게 된다. 이 모형을 제주지역의 관측소에 적용한 결과 관측소별로 타당한 예측결과를 도출하였다.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1997.06a
• /
• pp.42-46
• /
• 1997

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.592-599
• /
• 2009

In this paper, we consider multiuser multi-input/multi-output antenna systems with zero-forcing receivers in downlink. In this case, to exploit multiuser diversity, spatial-division multiple access (SDMA) system allows to assign different users to a part of transmit antennas at the base station whereas spatial-division multiplexing (SDM) system assigns all antennas to single user's data stream. In this paper, we present analytical frameworks to evaluate performance of these systems. We first analyze the performance of these two systems by deriving closed-form expressions of achievable throughput. Numerical results show that the derived expressions are very tight. In addition, we approximate the capacity expression of SDM and SDMA systems and compare the SDM with the optimal case.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.8
• /
• pp.904-914
• /
• 2011

The volumetric errors of CNC machining centers are determined by 21 errors, including 3 linear errors, 6 straightness errors, 3 perpendicular errors, 9 angular errors and non-rigid body errors of the machine tool. It is very time consuming and hard to measure all of these errors in which laser interferometer and other parts are used directly. Hence, as many as 21 separate setups and measurements are needed for the linear, straightness, angular and perpendicular errors. In case of the 5-axis machining centers, two more rotary tables are used. It can make 35 error sources of the movement. Therefore, the measured errors of multi movements of the 5-axis tables are very complicated, even if the relative measured errors are measured. This paper describes the methods, those analyze the error sources of the machining centers. Those are based on shifted diagonal measurements method (SDM), R-test and Double ball bar. In case, the angular errors of machine are small enough comparing with others, twelve errors including three linear position errors, six straightness errors and three perpendicular errors can be calculated by using SDM. To confirm the proposed method, SDM was applied to measuring 3 axes of machine tools and compared with directly measurement of each errors. In addition, the methods for measuring relative errors of multi-axis analysis methods using R-test and Double Ball Bar are introduced in this paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.395-404
• /
• 2012

This paper presents computations of the dynamic derivatives of three dimensional flight vehicle configurations using CFD. The pitch dynamic derivatives are computed from the pitch sinusoidal motion, while the roll damping is computed based on steady state calculation using a non-inertial frame method. The Basic Finner and the SDM(Standard Dynamic Model) are chosen for the benchmark tests against other numerical and experimental results. For the flow calculations, a 3-D Euler solver that can be run both on the non-inertial frame and on the inertial frame is developed. A dual-time stepping method is applied for the unsteady time accurate simulations. A good agreement of pitch-roll dynamic derivatives with previously published numerical results and the experimental results is observed.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.325-334
• /
• 2016

We projected the distribution of Hedera rhombea, an evergreen broad-leaved climbing plant, under current climate conditions and predicted its future distributions under global warming. Inaddition, weexplained model uncertainty by employing 9 single Species Distribution model (SDM)s to model the distribution of Hedera rhombea. 9 single SDMs were constructed with 736 presence/absence data and 3 temperature and 3 precipitation data. Uncertainty of each SDM was assessed with TSS (Ture Skill Statistics) and AUC (the Area under the curve) value of ROC (receiver operating characteristic) analyses. To reduce model uncertainty, we combined 9 single SDMs weighted by TSS and resulted in an ensemble forecast, a TSS weighted ensemble. We predicted future distributions of Hedera rhombea under future climate conditions for the period of 2050 (2040~2060), which were estimated with HadGEM2-AO. RF (Random Forest), GBM (Generalized Boosted Model) and TSS weighted ensemble model showed higher prediction accuracies (AUC > 0.95, TSS > 0.80) than other SDMs. Based on the projections of TSS weighted ensemble, potential habitats under current climate conditions showed a discrepancy with actual habitats, especially in the northern distribution limit. The observed northern boundary of Hedera rhombea is Ulsan in the eastern Korean Peninsula, but the projected limit was eastern coast of Gangwon province. Geomorphological conditions and the dispersal limitations mediated by birds, the lack of bird habitats at eastern coast of Gangwon Province, account for such discrepancy. In general, potential habitats of Hedera rhombea expanded under future climate conditions, but the extent of expansions depend on RCP scenarios. Potential Habitat of Hedera rhombea expanded into Jeolla-inland area under RCP 4.5, and into Chungnam and Wonsan under RCP 8.5. Our results would be fundamental information for understanding the potential effects of climate change on the distribution of Hedera rhombea.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.849-854
• /
• 2023

In this paper, a high-efficiency power amplifier was designed by applying the operating point Class J using LDMOS(laterally diffused metal oxide semiconductor) and optimizing the output matching circuit so that the second harmonic impedance becomes the reactance impedance. The designed power amplifier has a frequency of 108 ~ 110 MHz, Characteristics of PAE(power added efficiency) is 71.5% at P_SAT output (54.5 dBm), 55.5% at P_1dB output (51.5 dBm), and 24.38% at 45 dBm. The CSB(carrier with sideband) amplifier, which is the reference signal in the spatial modulation method, has an operating output of 45 dBm ~ 35 dBm, and linear SDM(sum in the depth of modulation) characteristics(40% ± 0.3%) were obtained. We measure the characteristics in amplitude modulation according to the bias operating point of the power amplifier for CSB and propose the optimal operating point to obtain linear modulation characteristics.

• Korean Journal of Veterinary Research
• /
• v.16 no.1
• /
• pp.77-96
• /
• 1976

In order to investigate the effects and acting mechanism on ovaries, thyroid glands and hypophyses of rabbits in short term administration of sulfadimethoxine (SDM) as medical dose, a total of 90 virgin albino rabbits (mean body weight, 1,362g) were selected at random and alloted to two groups. Rabbits in one group served as controls and the others were administered SDM of 50 mg/kg/day for 5 weeks, and then reared without medication for 4 weeks. Pathological changes of the three organs were observed each week for 9 weeks and the results obtained were summarized as follows: 1. Mean body weights of both groups manifested slow increasing tendency but mean hypophysis weights fluctuated throughout the experimental term. Mean ovary weights of experiments were decreased significantly from the 3rd to 6th week but mean thyroid weights of experiments were increased significantly from the 1st to 6th week compared with those of controls. 2. Many ovarian follicles of each developing stage showed follicular atresia accompanying atrophy or necrosis of oocytes and of disintegrated follicular cells. Theca interna cells and sudanophilic interstitial cells showed atrophy and diminished sudanophilic granules and also liquor folliculi were diminished. These changes icreased from the 1st week, remaining so for 5 weeks and returned to normal status in the 8th or 9th week. 3. The thyroid gland showed a typical hyperplastic goiter. Hypertrophic and hyperplastic epithelia follicular manifested cuboidal or columnar form showing tiny or small vacuoles in cytoplasm. The follicles showed atrophy and decreasing colloidal materials. Necrotic and regenerative changes were also present. The interfollicular vessels showed congestion and hemorrhage. These changes increased from the 1st week, remaining so for 5 weeks and returned to normal status in the 9th week. 4. The rates of differential cell counts of hypophyses revealed increase of basophils (gonadotrophs and thyrotrophs) and decrease of chromophobes. Basophils which had diminished granules stainable with HE, PAS and AF revealed hypertrophy, hyperplasia, and increasing of tiny or small vacuoles in cytoplasm. These changes increased from the 1st week, remaining so for 5 weeks and returned to normal status in the 8th or 9th week. As summarized above histologically, administration of SDM led thyrotrophs and gonadotrophs of pituitary glands to hyperactivity but revealed retrogressive and compensatory changes with functional disturbance in ovaries and thyroid glands. These changes were transitional and attributed to direct actions of the drugs on the ovaries and thyroid glands.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.341-345
• /
• 2005

Structural Dynamics Modification (SDM) is a very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures, changing material properties and shape of structure. Among those of SDM technique, the method to change shape of structure has been mostly relied on engineer's experience and trial-and-error process which are very time consuming. In order to develop a systematic method to change structure shape, surface grooving technique is studied. In this work, the shape of base structure was modified to improve its dynamic characteristics such as natural frequencies via surface grooving technique. Grooving shape was formed by mergingthe neighboring small embossing elements after analyzing frequency increment sensitivities of all the neighboring emboss elements. For this process, Criterion Factor was introduced and the initial grooving was started from the element having highest strain energy and the grooving is expanded into neighboring element. The range of targeting grooving area to check its frequency variations restricted to their neighboring area to reduce the computation effort. This surface grooving technique was successfully applied to a hard disk drives (HDD) cover model to raise its natural frequency by giving some groove on its surface.