• Korean Journal of Veterinary Service
• /
• v.22 no.1
• /
• pp.79-84
• /
• 1999

This study was carried out to investigate isolation of Pasteurella multocida from pneumonic lungs of slaughtered animals in Kyungsan abattoir to examine the antimicrobial susceptibility and biochemical properties. The results were summarized as follows ; P multocida was isolated from 50(29.2% ) of the 171 pneumonic lungs collected individually from cattle(3/40), goats(0131) and pigs(47/100), All of the isolated P multocida showed biocemical and cultural properties similiar to reference strains. All isolates were very susceptible to AK, AM, ENR, CF, GM,07, whereas resistant to SDM.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.72-76
• /
• 2003

Even though embossing is an effective SDM(Structural Dynamics Modification) technique, it is difficult to implement the method in fields owing to its geometric complexity. In this research low flat-top emboss shape, rather than general shape, is considered and a systematic procedure is derived in describing the emboss implementation procedure utilizing the fact that the emboss shape can be fully expressed only if the boundary elements are appropriately given. Best position to maximize natural frequencies is found using the procedure and usefulness of the suggested technique is illustrated.

• Journal of Integrative Natural Science
• /
• v.4 no.2
• /
• pp.130-136
• /
• 2011

This study investigated the adsorption characteristics of nickel, zinc and cadmium ions from the aqueous solution onto the alginate bead. Adsorption equilibrium capacities of the heavy metal ions increased with increasing initial pH of the solution. The adsorption equilibrium isotherm of the heavy metal ions was well represented by Langmuir equation. The magnitude of adsorption capacity of the heavy metal ions onto alginate bead was the order of cadmium > zinc > nickel. Kinetic parameters were measured in a batch adsorber to analyze the adsorption rates of the heavy metal ions. The internal diffusion coefficient of the heavy metal ions in the intraparticle were determined by comparing the experimental concentration curves with those predicted from the surface diffusion model (SDM) and pore diffusion model (PDM). The internal diffusion of the heavy metal ions in the intraparticles was explained by PDM.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.226-232
• /
• 2018

We propose a triangular-multicore hollow optical fiber (TMC-HOF) design for uncoupled mode-division and space-division multiplexing. The TMC-HOF has three triangular cores, and each core has three modes: $LP_{01}$ and two split $LP_{11}$ modes. The asymmetric structure of the triangular core can split the $LP_{11}$ modes. Using the proposed structures, nine independent modes can propagate in a fiber. We use a fully vectorial finite-element method to estimate effective index, chromatic dispersion, differential group delay (DGD), and confinement loss by controlling the parameters of the TMC-HOF structure. We confirm that the proposed TMC-HOF shows flattened chromatic dispersion, low DGD, low confinement loss, low core-to-core crosstalk, and low crosstalk between adjacent modes. The proposed TMC-HOF can provide a common platform for MDM and SDM applications.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2294-2296
• /
• 2005

Multilayer microstrip lines are an integral part of an MMIC. This paper presents an analysis of multilayer GaAs-MMIC microstrip line using a spectral domain method(SDM) taking into account the effect of the variation in the thickness of various layers of substrates on the characteristic impedance and the effective dielectric constant of the line. This work is expected to be useful in GaAs foundries for accurate CAD modelling of the microstrip lines up to 40GHz.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.46-49
• /
• 2009

An optimal design procedure is proposed to effectively reduce the torque ripple by optimizing the rotor pole shape of the spoke type IPMSM with concentrated winding. The procedure is composed of two steps. In step I, the steepest descent method (SDM) is used with only two design variables to rapidly approach the optimal shape. From the near optimal rotor shape as a result of the step I, the design variables are reselected and the drawing spline curves are utilized to explain more complex shape with the Kriging model in step II. By using an optimal design procedure, we show that the optimized rotor pole shape of the spoke type IPMSM effectively reduces the torque ripple while still maintaining the average torque.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.196-198
• /
• 2008

본 논문에서는 강압형 DC-DC 컨버터의 성능 개선을 위한 스위칭 기법인 2차 SDSDM(Space Dithered Sigma-Delta Modulation)방식을 제안한다. PWM 방식은 일정 스위칭 주파수 대역에서의 고조파로 인해 소음, 전자파 장애, 스위칭 손실 등을 초래한다. 이러한 문제를 해결하기 위한 DSDM 방식의 일종인 1차 SDSDM은 랜덤 디더(Random Dither) 발생기가 1차 SDM의 양자화기(quatizer) 입력 단에 위치하여 스위칭 주파수가 분산된다. 강압형 DC/DC 컨버터에 제안하는 2차 SDSDM의 방식을 적용한 실험 결과를 통해 타당성을 검증한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.155-158
• /
• 2005

Sub-frame is a key component to damp the vibration of engine-born and isolate the input force from a ground. To enhance the performance of the sub-frame of vehicle, its structure should be designed to be a high performing mechanical filter that exclude the low frequency vibration elements. In this paper, a contribution analysis based on the frequency response function(FRF) is introduced to detect a high sensitive position of the target sub-frame and its results are validated with a SDM(structural dynamic modification) analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.666-669
• /
• 2004

Substructures position is considered as design parameter to obtain optimal structural changes to raise its dynamic characteristics. In conventional SDM (structural dynamics modification) method, the layout of modifying substructures position is first fixed and at that condition the structural optimization is performed by using the substructures size and/or material property as design parameters. But in this paper as a design variable substructures global translational and rotational position is treated. For effective structural modification the eigenvalue sensitivity with respect to that design parameter is derived based on measured frequency response function. The optimal structural modification is calculated by combining eigenvalue sensitivities and eigenvalue reanalysis technique iteratively. Numerical examples are presented to the case of beam stiffener optimization to raise the natural frequency of plate.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.40-46
• /
• 2003

진동에 민감한 각종 정밀장비를 갖추고 있는 공장구조물은 설립하는 설계 초기단계에서부터 정밀장비의 정상 운용을 위하여 장비 업체 제시한 진동허용규제치 및 동특성허용규제치를 만족할 수 있도록 공장구조물 설계시 진동 측면에 대하여 동적(動的) 특성을 검토해야만 한다. 이러한 설계조건을 만족시켜주기 위한 방안으로 외부에서 정밀장비로 유입되는 진동에 대찬 진동절연을 위하여 진동전달률 이론을 적용하여 방진효율 산출하는 방법과 정밀장비에서 발생하는 동하중을 고려하여 공장구조물에 대한 동적설계를 수행하는 것으로, 구조물 동특Jt!을 요구되는 만큼 구조물의 동특성 변경하는 SDM(Structural Dynamic Modifacation)방법이 주로 활용된다 이에 본 연구에서는 앞서 언급한 구조물의 동적설계시 후자조건인 구조물의 동특성을 변경하고자 하는 경우에 실구조물에 하중을 정량적으로 조절하며 가할 수 있는 VSD 시스템을 이용하여 구조물의 동특성을 변화시키는 것을 동적해석으로 예측하였고, 현장에서 실제 동적실험으로 구한 결과를 동적설계목표치와 비교하여 유용성에 대하여 확인하였다.