• Title/Summary/Keyword: SD700

Search Result 32, Processing Time 0.023 seconds

Comparative Study of Microstructure and Tensile Properties of 600 and 700 MPa-Grade High-Strength Seismic Resistant Reinforced Steel Bars (내진용 600 및 700 MPa 급 고강도 철근의 미세조직과 인장 특성 비교)

  • Hong, T.W.;Lee, S.I.;Lee, J.H.;Shim, J.H.;Lee, M.G.;Hwang, B.
    • Transactions of Materials Processing
    • /
    • v.27 no.5
    • /
    • pp.281-288
    • /
    • 2018
  • This study deals with the microstructure and tensile properties of 600 and 700 MPa-grade high-strength seismic reinforced steel bars. High-strength seismic resistant reinforced steel bars (SD 600S and SD 700S) were fabricated by TempCore process, especially the SD 700S specimen was more rapid cooled than the SD 600S specimen during the TempCore process. Although two specimens had microstructure of tempered martensite in the surface region, the SD 600S specimen had ferrite-degenerated pearlite in the center region, whereas the SD 700S specimen had bainite-ferrite-degenerated pearlite in the center region. Therefore, their hardness was highest in the surface region and revealed a tendency to decrease from the surface region to the center region because tempered martensite has higher hardness than ferrite-degenerated pearlite or bainite. The SD 700S specimen revealed higher hardness in the center region than SD 600S specimen because it contained a larger amount of bainite as well as ferrite-degenerated pearlite. On the other hand, tensile test results indicated the SD 600S and SD 700S specimens revealed continuous yielding behavior because of formation of degenerated pearlite or bainite in the center region. The SD 600S specimen had a little higher tensile-to-yield ratio because the presence of ferrite and degenerated pearlite in the center region and the lower fraction of tempered martensite enhance work hardening.

Evaluation of Structural Performance of RC Beam with Different Depths to Lap Splice Detail of SD700 Headed Bar (SD700 확대머리 철근의 겹침이음 상세를 적용한 단차가 있는 RC 보의 구조성능 평가)

  • Lee, Ji-Hyeong;Kim, Seung-Hun
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.25 no.6
    • /
    • pp.262-269
    • /
    • 2021
  • This paper conducts an evaluation of the structural performance of the lap splice detail of SD700 headed bar experiment for developing an RC beam with different depths joint details. The experiment variable is lap splice length, yield strength, and end anchorage of main reinforcements. For all specimens, a headed bar was applied to the main reinforcement of the beam with low depth (B2), and the beam with high depth (B1) was applied to the main reinforcement with two splice methods: straight headed bar and 90° hooked-headed bar. The experimental results were that specimens of applying SD500 and SD600 had the results of flexural fracture at the lap splice location, which maximum load was similar. For specimens of appling SD500, the 90° hooked-headed bar of B1, suppressed horizontal cracks in the lap splice section compared to the straight headed bar. Specimens of applying an SD 700 headed bar had the results of brittle anchorage failure. In addition, maximum load was increased with the lap splice length increasing. For specimens of applying SD700 headed bar, test for test maximum load/theoretical load for test development length/design development length were estimated to be 1.30~1.48 for the ACI 318-19 equation, and 1.14~1.30 for the KDS-2021 equation. Thus, ACI 318-19 equation had conservatively greater safety factors as estimated development lengththened.

Anchorage performance tests of SD700 hooked bar and headed bar with a anchorage length of 20db (20db 정착길이를 가지는 SD700 갈고리철근과 확대머리철근의 정착성능 실험)

  • Kim, Ho Young;Sim, Hye Jung
    • Journal of Urban Science
    • /
    • v.7 no.2
    • /
    • pp.21-27
    • /
    • 2018
  • With the increase of the skyscraper center, the development of large-diameter and high-strength reinforcing bars is being carried out to solve the dense reinforcement. In case of the steel reinforced concrete with a small cross section such as beam-column joints, the development length becomes short when straight bars are used. Therefore, it is possible to solve the problem that the development length becomes short by using the bearing strength of the hooked bar and headed bar. In this study, the exterior beam-column joint test of SD700 hooked bar and headed bar with anchorage length of 20db was conducted to extend the development length limitation of hooked bar and headed bar. As a result of the evaluation of the anchorage strength using the design equation by KCI, the average of the [measured value]/[predicted value] ratio was 1.31 for the hooked reinforcing bars. In the case of headed bars, the average of the [measured value]/[predicted value] ratio was 1.12. In addition, in order to compare the anchorage performance of the hooked bar and the headed bar, the measured values were divided by the square root of the compressive strength of the concrete to compare the anchorage strength. Under the same conditions, the anchorage strength of headed bars was 8.5% higher than the hooked bars.

An Experimental Study on the Flexural Capacity of RC Beams with High-Strength Reinforcement (고장력 철근이 배근된 RC보의 휨성능에 관한 실험적 연구)

  • Hong, Geon-Ho;Tak, So-Young;Jo, Jae-Yeol;Lee, Jae-Hun
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.11a
    • /
    • pp.289-292
    • /
    • 2008
  • This paper studied experimentally on the structural performance and serviceability of RC beams with high-strength reinforcing bars. Following to the previous research, high-strength reinforcing bars have an negative effect on the deflection and crack depth. But, there are advantages about reducing amount of reinforcement than normal-strength reinforcing bars. So, the purpose of this paper is to analyze the effect of flexural performance on the beams with high-strength reinforcing bars. Three specimens were tested, and the main variable was the yield strength of the reinforcements; SD400, SD600 and SD700. Experimental results shows that the stiffness of members reduced when apply to high-strength reinforcement and equal reinforcement ratio. But the flexural strength of members increased to proportion to the strength and amount of reinforcement. Also, when high-strength reinforcement used, serviceability aspect do not appear to be affected because there is no change for crack number and maximum crack width.

  • PDF

The Effect of Dialysate Flow Rate on Dialysis Adequacy and Fatigue in Hemodialysis Patients (혈액투석 시 투석액 속도가 투석적절도와 피로에 미치는 효과)

  • Cha, Sun Mi;Min, Hye Sook
    • Journal of Korean Academy of Nursing
    • /
    • v.46 no.5
    • /
    • pp.642-652
    • /
    • 2016
  • Purpose: In this single repeated measures study, an examination was done on the effects of dialysate flow rate on dialysis adequacy and fatigue in patients receiving hemodialysis. Methods: This study was a prospective single center study in which repeated measures analysis of variance were used to compare Kt/V urea (Kt/V) and urea reduction ratio (URR) as dialysis adequacy measures and level of fatigue at different dialysate flow rates: twice as fast as the participant's own blood flow, 500 mL/min, and 700 mL/min. Thirty-seven hemodialysis patients received all three dialysate flow rates using counterbalancing. Results: The Kt/V ($M{\pm}SD$) was $1.40{\pm}0.25$ at twice the blood flow rate, $1.41{\pm}0.23$ at 500 mL/min, and $1.46{\pm}0.24$ at 700 mL/min. The URR ($M{\pm}SD$) was $68.20{\pm}5.90$ at twice the blood flow rate, $68.67{\pm}5.22$ at 500 mL/min, and $70.11{\pm}5.13$ at 700 mL/min. When dialysate flow rate was increased from twice the blood flow rate to 700 mL/min and from 500 mL/min to 700 mL/ min, Kt/V and URR showed relative gains. There was no difference in fatigue according to dialysate flow rate. Conclusion: Increasing the dialy-sate flow rate to 700 mL/min is associated with a significant increase in dialysis adequacy. Hemodialysis with a dialysate flow rate of 700 mL/min should be considered in selected patients not achieving adequacy despite extended treatment times and optimized blood flow rate.

Effect of the Gardenia jsaminodes and Glycine max on Hepatotoxicity of D-Galactosamine in Rats (D-Galactosamine으로 유발된 흰쥐의 간손상에 대한 치자와 두시 추출액이 미치는 영향)

  • Kim, Jeong-Sang;Jeong, Jong-Kil
    • 대한상한금궤의학회지
    • /
    • v.4 no.1
    • /
    • pp.29-36
    • /
    • 2012
  • Aim : To investigate the hepatotective effect of Gardenia jsaminodes and Glycine max aqueous extract against D-galactosamine (d-GalN, 300mg/kg body weight) was administered to the male Sprague Dawley (SD) rats. Materials and Methods : The study was carried out on male SD rats (age matched, weight $250{\pm}10g$). Experimental groups divided four: Normal group (Nor) was administered saline, Control (Con) group was administered saline after d-GalN treatment. Experimental group (Exp) was administered Gardenia jsaminodes (200 mg/kg; Ga group), Glycine max (700 mg/kg; Gl group), and Gardenia jsaminodes+Glycine max (200 mg/kg+700 mg/kg, GG group) during 14 days(n=5). Results : d-GalN administration induced hepatotoxicity in rats which was manifested by increased levels of alanine aminotransferase, aspartate aminotransferase, alkaline phosphatase but decreased total cholesterol and triglyceride. Treatment with Gardenia jsaminodes extract significantly protected the liver in d-GalN administered rats. Conclusion : Gardenia jsaminodes aqueous extract and Gardenia jsaminodes+Glycine max extract possesses hepatoprotective potential, thus validating its use in alleviating toxic effects of d-GalN.

Heated temperature and Range of the Oxy-acetylene Cutting Reinforcing Bar by Simulation and Experiment (시뮬레이션과 실험에 의한 산소절단기 절단시 철근의 수열온도 분포)

  • Kim, Bong-Joo;Kim, Jae-Hun;Cho, Byoung-Hoo
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.8 no.2
    • /
    • pp.1-5
    • /
    • 2008
  • The object of this experimental and simulation study is to find out heated temperature and range from the Oxy-acetylene cutting point of reinforcing bars (D10, D13, D16, D19, D22, D25 for each cases of SD3O and SD40) in room temperature ($20{\sim}22^{\circ}C$). This cutting is under the condition that a skilled worker cut one bar per a time. The results are these. 1. The temperature of the point 1 of reinforcing bars cut with Oxy-acetylene cutter is over 700$^{\circ}C$ under 1000$^{\circ}C$, but the temperature of the point 2 of reinforcing bars cut with Oxy-acetylene cutter is under 200$^{\circ}C$ 2. The temperature of the point that is apart 2cm from Oxy-acetylene cutting point is not over 200$^{\circ}C$, so reinforcing bars has not transform to be brittle. The results of simulation for temperatures of the each point apart from Oxy-acetylene cutting point is similar to upper experimental results.

Differential effects of various dietary proteins on dextran sulfate sodium-induced colitis in mice

  • Eunyeong, Ahn;Hyejin, Jeong;Eunjung, Kim
    • Nutrition Research and Practice
    • /
    • v.16 no.6
    • /
    • pp.700-715
    • /
    • 2022
  • BACKGROUND/OBJECTIVES: Chronic colitis is a risk factor for colorectal cancer (CRC) development in both animals and humans. Previously, we reported that a diet rich in protein (with casein as the protein source) significantly increased the risk of mouse CRC development in a dose-dependent manner. In this study, we investigated the effects of different protein sources on the risk of colitis development. MATERIALS/METHODS: Balb/c mice were divided into 7 experimental groups: 20% casein (20C), 20C-dextran sulfate sodium (DSS), 40% casein-DSS (40CD), 40% whey protein-DSS (40WD), 40% soy protein-DSS (40SD), 40% white meat-DSS (40WMD), and 40% red meat-DSS (40RMD). Mice were fed an experimental diet for 4 wk and received 3% DSS in their drinking water for 6 days during the 4th wk of the experimental period. RESULTS: Compared to other groups, the 40CD group showed the most aggravated colitis with increased disease activity and inflammatory markers. In the 40RMD group, interleukin (IL)-6 levels were the highest among all the groups. The 40SD group showed conflicting effects, for example, elevated mortality and disease activity but decreased nitric oxide (NO) levels. The 40WD group showed attenuated colitis with increased IL-10 levels and decreased NO levels. The 40WMD group showed conflicting effects, including decreased NO levels and elevated fecal lipocalin-2 and IL-6 levels. CONCLUSIONS: These results suggest that, at levels of 40% in the diet, casein and red meat exacerbate colitis, whereas whey protein mitigates it the most effectively.

Effect of the Chizadochi-Tang on Hepatotoxicity of D-Galactosamine in Rats (D-Galactosamine으로 유발된 흰쥐의 간손상에 대한 치자두시탕 추출액이 미치는 영향)

  • Kim, Jin-Ho;Jeong, Jong-Kil
    • The Korea Journal of Herbology
    • /
    • v.28 no.2
    • /
    • pp.17-23
    • /
    • 2013
  • Objectives : To investigate the hepatoprotective effect of Gardeniae Fructus (Ga) and Glycine semen preparatum (Gl) aqueous extract against D-galactosamine (D-GalN, 300mg/kg body weight) was administered to the male Sprague Dawley (SD) rats. Materials and Methods : The study was carried out on male SD rats (age matched, weight $250{\pm}10$ g). Experimental groups (Exp) divided four : Normal group (Nor) was administered saline, Control (Con) group was only received D-GalN (300 mg/kg) intraperitoneally. Exp was orally administered Ga (200 mg/kg; Ga group), Gl (700 mg/kg; Gl group), and Chizadochi-Tang (200 mg/kg+700 mg/kg, GG group) after D-GalN treatment during 14 days (n=6). Results : D-GalN administration induced hepatotoxicity in rats which was manifested by increased levels of aspartate aminotransferase (AST), alanine aminotransferase (ALT), alkaline phosphatase (ALP) and lactate dehydrogenase (LDH) but decreased total cholesterol (HDL C) and triglyceride (TG). The serum TG concentrations were significantly increased ($^{\sharp}p$ <0.05) in the Ga group compared with Con. AST and ALP activities were significantly decreased ($^{\sharp}p$ <0.05) in the all experimental groups compared with Con. ALT activities were significantly decreased ($^{\sharp}p$ <0.05) in the Ga group compared with Con. LDH activities were significantly decreased ($^{\sharp}p$ <0.05) in the GG group compared with Con. On the light microscopic study, a number of vacuole were observed in the Con, but decreased in experimental groups. Conclusion : Ga aqueous extract and Chizadochi-Tang extract possesses hepatoprotective potential, thus validating its use in alleviating toxic effects of D-GalN.