• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10A
• /
• pp.976-981
• /
• 2006

In this paper, we describe a hybrid ZF-SD method. The method is based on dimensionality reduction via predecoding and cancellation of those symbols that can be quickly and reliably detected by a linear decoder. The proposed method shows BER performance similar to SD but with much lower computational complexity than SD.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.27-30
• /
• 2003

본 논문에서는 하이브리드 다중 표현(hybrid multiple description) 개념을 이용하여 에러가 발생하기 쉬운 환경에서 사용될 수 있는 강인한 동영상 압축 알고리듬을 제안한다. 다중 표현 압축은 단일 표현 압축(single description coding. SDC) 보다 패킷 손실 율(packet loss rate, PLR)이 높은 환경에서 에러에 더 강인성을 갖는다. 그러나 PLR 이 낮은 환경에서는 과도한 중복량(redundancy) 때문에 성능이 저하되는 문제가 발생한다 이러한 MDC 의 문제를 해결하기 위해서 채널 환경에 따라 SD/MID 를 전환할 수 있는 방법을 제안한다. 좀더 자세히 설명하면, 낮은 PLR 에서는 압축 효율을 위하여 SDC 를 사용하고 높은 PLR 환경에서는 에러에 대한 강인성을 위해 MDC 를 사용한다. SD/MD 전환을 최적화시키기 위해 비트율-왜곡 최적화 프레임웍(rate-distortion optimization framework)을 사용한다. 부호화시에 복호기에서의 왜곡(distortion)을 정확히 예측하기 위해서 ROPE(recursive optimal per-pixel estimate) 방법을 사용한다. 모의 실험 견과 제안된 SD/MD 전환 방법이 기존의 SDC-ROPE 와 MDC-ROPE 보다 모든 에러 환경에서 더 효과적임을 알 수 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.1
• /
• pp.27-34
• /
• 2012

The objective of this study is to evaluate the stiffness of mortar-filled sleeve bar splice using estimation method of failure mode in the sleeve reinforcement splice. To attain this goal, we analyzed the test results of 261 actual-sized mortar-filled sleeve splice specimens. The study results showed that the estimation method of the failure mode in mortar-filled sleeve bar splice made an effective estimate of the stiffness in this bar splice with the exception of specimens with SD500 bars and smooth pipe sleeve. Especially, of the specimens with cast sleeve or uneven pipe sleeve in the range of reinforcement fracture using the estimation method of the failure mode in mortar-filled sleeve splice, specimens over 98% with SD400 bars and all specimens with SD500 bars had the stiffness capacity of higher than "A" class of AIJ code in monotonic loading. In addition, of the specimens in the range of reinforcement fracture using the estimation method of the failure mode in mortar-filled sleeve splice, all specimens with SD400 bars and SD500 bars had the stiffness capacity of higher than "A" class of AIJ code in cyclic loading.

• Journal of Broadcast Engineering
• /
• v.20 no.4
• /
• pp.580-597
• /
• 2015

Broadcast encryption system is a cryptographic primitive that enables a sender to broadcast a message to a set of receivers in a secure channel. Out of previous proposed broadcast encryption systems, the most effective is the one that uses the Subset Difference(SD) method in a binary tree structure. The SD method has been realized by two underlying approaches: Pseudo-Random Generator(PRG) and Secret Sharing(SS). 2-SD method is the generalized version of the SD method by which two subsets of revoked receivers can be dealt with by one subset (in an SD-based broadcast encryption system). The primary advantage of the 2-SD method is to further reduce the size of transmission overhead, compared to the SD method. Until now, however, there is no known broadcast encryption system that is based on such a 2-SD technique using either PRG or SS basis. In this paper, we suggest a new 2-SD broadcast encryption system using the SS-based technique that was suggested by Jae Hwan Lee et al. in 2014[9]. The new system can reduce the size of ciphertext by 25% of the one in the previous SS-based broadcast encryption system. Also, on a theoretical note, ours is the first 2-SD broadcast encryption system that is provably secure.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.2
• /
• pp.136-145
• /
• 2007

This study analyzes the current usage of SD500 high-strength re-bar in domestic construction sites. Also, an evaluation method was developed to measure economic efficiency of lap splice and coupler splice, which are most commonly used in connection SD500. The evaluation method was applied to construction sites in Seoul in December 2006, and the result revealed that coupler splice is relatively superior in terms of cost efficiency when the re-bar diameter is bigger and the concrete strength is lower.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.12
• /
• pp.1062-1070
• /
• 2002

In this paper, variable radix-two multibit coding algorithm is presented and applied in the implementation of discrete cosine transform(DCT) and inverse discrete cosine transform(IDCT). Variable radix-two multibit coding means the 2k SD (signed digit) representation of overlapped multibit scanning with variable shift method. SD represented by 2k generates partial products, which can be easily implemented with shifters and adders. This algorithm is most powerful for the hardware implementation of DCT/IDCT with constant coefficient matrix multiplication. This paper introduces the suggested algorithm, it's proof and the implementation of DCT/IDCT The implemented IDCT chip with 8 PEs(Processing Elements) and one transpose memory runs at a tate of 400 Mpixels/sec at 54MHz frequency for high speed parallel signal processing, and it's verified in HDTV and MPEG decoder.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.69-77
• /
• 2014

System Dynamics(SD) is one of the complexity theories that has attracted attention as a computer-aided simulation methodology to analyze a dynamic problem and to develop a policy(strategy) in social science. Though there are properly unproven cases in research models which were developed in various fields by SD methodology during the last five decades, they are utilized as models to represent SD sub-theories. For this reason, this study targeted the population dynamics model which was frequently utilized to explain SD fundamentals and it proved errors of reasoning a structure of the existing causal and dominant feedback loop. Consequently, we presented a strategy to strengthen the coherence between CLD(causal loop diagram) and SFD(stocks-and-flows diagram) for improving validity of the existing model. The findings of this study contribute to the advancement of the existing SD and to the reinforcement of validation for policy research models of SD.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.77-82
• /
• 2014

SD memory cards are widely used in portable digital devices, and most of them exploit NAND flash memory as their storage, so that they have a feature of storing users' important data safely with low costs. In case of using NAND flash memory as storage, however, there is no method to store users' data if memory capacity is insufficient when transferring a large volume of data. This paper proposes a virtual SD memory card system. It used a SD memory card device driver to process data requested from a host by exploiting external storage rather than by exploiting flash memory as a memory core for storing data to the SD memory card. For experiment, it used the FPGA-based SD card slave controller IP on the SMC controller with a S3C2450 ARM CPU to test.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.103-110
• /
• 2000

In This paper, we propose a design procedure for a SD $H_{\infty}$controller with PID performance. In developing the procedure, we use the basic idea of standard$H_{\infty}$problem, and then applied it to the SD system, which consists of the continuous plant and the discrete controller. This $H_{\infty}$controller design procedure involves the selections of weighting functions. The selections considered the relation of the closed loop specification between the $H_{\infty}$controller and PID. We illustrate this procedure in the controller design for a two-mass spring system.

• Korean System Dynamics Review
• /
• v.10 no.4
• /
• pp.73-83
• /
• 2009

Systemic Dynamics has been widely used as a method for studies in the areas of education, health care, and behavioral sciences. This paper discussed the SD application in nursing research by illustrating examples of published articles in nursing discipline, which can be classified into physiologic, socio-psychological, and health policy fields. It also identified the limitations of SD use in nursing and suggests strategies in order to facilitate a SD method for nursing research: 1) systematic introduction of SD in nursing research fields; 2) Interest about SD as an innovative research method; 3) researcher's efforts to understand the SD method in academic settings.