In this study, an experiment was conducted on influent water with low concentrations of organic matter, such as river water or secondary treatment water of a sewage treatment plant, according to HRT changes by using aerobic biofilm. In the biofilm process, as the biofilm increases in thickness, the inner membrane can be low in oxygen transfer rate and become anaerobic conditions, while the detachment of biomass from biofilm occurs. To overcome these limitations in the detachment of microorganisms in biofilm, the yarn, which was made from poly propylene(PP), was weaved and manufactured into a tube. Then, a test was carried out by injecting air so that the interior of the biofilm could create aerobic conditions. The results of the experiment showed that the removal efficiency of $TCOD_{cr}$ reached 66.1~81.2% by HRT 2hr, and 50.9 ~61.8% after HRT 1 hr. The removal efficiency of $SCOD_{cr}$ was 45.9 to 55.1% by HRT 1hr, and 26.1% in HRT 0.5hr, showing the highest removal efficiency in HRT 1hr. The SS removal efficiency was at 81.8 to 94.6%, and the effluent SS concentration was very low, indicating less than 2.2 mg/L in all HRT's. As a result, the $SCOD_{cr}$ and $NH_4{^+}$-N that were removed per specific surface area and attached to microbial biofilm showed the highest efficiency in HRT 1hr with 8.37 $gSCOD_{cr}/m^2{\cdot}d$, 2.93 $gNH_4{^+}-N/m^2{\cdot}d$. From the result of reviewing the characteristics of biofilm growth, microorganisms were found to be attached, and increased by 36 days. Later, they decreased in number through detachment, but showed a tendency to increase again 41 days later due to microbial reproduction.
In order to investigate the effective pretreatment methods in WAS(=waste activated sludge) solubilization, the values of SCOD yield per unit SS (SCOD/gSS.hr) were compared. After the hydrodynamic cavitation with pH of 12.5, SCOD increased to 7800 mg/L, SS decreased to 45 % and the solubilization rate was 29 %. Combination of alkality (pH 12.5) and the cavitation seems to be the optimal condition for sludge solubilization. After the cavitational pretreatment, efficiencies of anaerobic digestion of the unfiltered sludge(the control), raw sludge and pretreated sludge were evaluated with BMP(=biochemical methane potential) tests. For evaluation of the biodegradability characteristics of pretreated sewage sludge, the methane production has been measured for 6 months. The methane production of pretreated sludge increased 1.4 times than that of untreated sludge. The result indicates that the cavitationally pretreated sludge was a better biodegradability substrate in anaerobic condition compared to raw sludge. It is obvious that cavitational pretreatment could enhance not only solubilization but also biodegradability of WAS. In conclusion, cavitational pretreatment of WAS to convert the particulate into soluble portion was shown to be effective in enhancing the digestibility of the WAS.
The purpose of this study is to estimate the applicability of a stable anaerobic digester using a separator membrane to the preprocessing thickening process. The results of the experiments showed about a 47.16% weight loss rate for the sludge under anaerobic condition, and about 41.17% under intermittent aeration condition. The concentrations of rejection water were $SCOD_{Cr}$ 25 mg/L, T-N 16.6 mg/L, and T-P 1.4 mg/L on the average under the intermittent aeration condition, which were lower than the concentrations of rejection water under an anaerobic condition. As for the factors affecting the reduction of the flux, correlation analyses of TTF, MLSS, $SCOD_{Cr}$, and $EPS_{Protein}$, $EPS_{Polysacchride}$ resulted in -0.97, -0.95, -0.84 and -0.86, -0.95, respectively, which showed that TTF had the highest correlation to the reduction of the flux. In addition, it was concluded that MLSS, $SCOD_{Cr}$ and $EPS_{Protein}$, $EPS_{Polysacchride}$ also have close correlations. The results are considered to show that, in the case of the process using a tubular membrane in the preprocessing process of an anaerobic digester, an intermittent aeration condition of the thickener considering the contamination of the membrane and load of rejection water is appropriate for the stable preprocessing process.
슬러지의 감량과 최종처분 기술 개발을 위해 실험실 규모 호기성 소화공정을 279일간 운전하였다. 혐기성 소화 슬러지를 원료로 $40^{\circ}C$에서 120분간 알칼리 전처리하여 호기성 소화조에 유입시켰다. 유입 슬러지 성상과 HRT의 변화에 따라 소화효율의 변화가 있었으며 적정 HRT는 6일인 것으로 나타났다. 이때 $NH_3$-N, SCOD, TKN, TCOD, SS, VSS의 평균 제거율(소화조 유입 슬러지 기준)은 각각 97.4%, 81.7%, 68.7%, 61.4%, 50.6%, 47.0% 이었다. SS는 전처리와 호기성 소화를 통해 원료 슬러지(23,920 mg/L)의 73.9% 감량화가 가능하였다. 처리 슬러지는 약 350 mg/L의 SCOD를 포함하고 있어 액비로 활용하기에 무리가 없을 것으로 판단되었다. HRT를 5일 이상으로 유지할 경우 질산화 반응이 활성화되었으며 최대 658 mg/L의 유출 슬러지 질산성 질소 농도를 얻을 수 있었다. 암모니아성 질소 농도는 20 mg/L 내외로 크게 감소하였다.
본 연구는 하수슬러지 전처리 방법으로 분쇄, 동결 해동, 동결 분쇄 조작을 한 후, 각각의 슬러지 특성의 변화를 고찰하였다. 분쇄 슬러지, 동결 해동 슬러지, 동결 분쇄 슬러지는 하수슬러지 부피에 비해 각각 2.08배, 3.37배, 3.54배 감소하여 동결 분쇄한 경우가 가장 슬러지 감소량이 컸으며 그 다음으로 동결 후 해동한 경우, 분쇄만 한 경우 순이었다. 또한 하수슬러지의 SCOD 농도, SBOD 농도, protein 농도는 동결하지 않은 것보다 동결 하는 것이 높았고, 그 중에서도 동결 후 분쇄하는 것이 가장 높은 경향을 보였다. TS, VS의 제거율은 동결한 것이 높았지만, 동결 분쇄보다 동결 해동이 높은 경향을 보였다. 이상의 결과로부터 동결 분쇄 방법이 슬러지 전처리 방법으로 매우 효과적이며 2012년부터 발효되는 슬러지 해양 투기 전면 금지에 대한 대안이 될 수 있을 것으로 기대된다.
하수 처리장에서 발생하는 폐활성슬러지는 대부분 미생물로 구성되어 있으며, 단단한 세포벽 때문에 혐기성 소화에 의한 안정화가 힘들다. 이를 극복할 수 있는 다양한 전처리 방법 가운데 하나가 벤츄리를 이용한 수리동력학적 캐비테이션 방법 (venturi cavitation system, VCS)이다. 본 연구에서는 VCS을 사용한 전처리가 폐활성슬러지의 소화효율에 미치는 영향을 조사하였다. VCS로 전처리한 슬러지는 대조군에 비하여 전처리 기간에 따라 메탄 발생량, COD 제거효율, VS 제거효율이 각각 41~45%, 36.5~43.1%, 18.4~24.1%가 증가하였다. 또한 전처리에 의하여 SCOD를 증가시켜 투입하였을 때, 증가된 SCOD의 이론적 메탄가스 발생량보다 약 3.3~4.2배 많은 메탄이 발생한 것으로 나타났다. 이는 VCS에 의한 전처리에서 슬러지의 가용화 현상에 의하여 소화효율이 향상되었을 뿐 아니라 가용화가 되지 않은 입자상 부분도 소화에 유리한 상태로 개량되었음을 의미한다. 전처리를 위해 투입한 에너지와 메탄가스의 발생 증가분에 대한 에너지 수지를 계산하였을 때 대부분의 조건에서 에너지 회수가 가능하여, VCS 장치의 현장 적용성이 높을 것으로 판단된다.
혐기성 소화공정은 하수슬러지의 안정화와 VS 감소 및 바이오가스 생산의 장점으로 인해 가장 일반적인 하수슬러지 처리공정이다. 혐기성 소화공정에서 하수슬러지의 분해속도가 느리기 때문에 가수분해 속도를 향상시키기 위한 많은 전처리 방법들이 연구되어져 왔다. 본 연구에서는 주로 초음파의 음향강도와 조사시간에 따른 하수슬러지의 초음파 분해에 대한 영향을 검토하였다. 본 연구에서는 주로 초음파의 음향강도와 조사시간에 따른 하수슬러지의 초음파 분해에 대한 영향을 검토하였다. 실험은 초음파의 발진주파수를 40kHz로 하여 초음파 조사밀도를 각각 33W/L, 70W/L, 88W/L 및 139W/L로 변화시켜 조사하였고, 초음파 조사시간을 각각 10분, 20분, 25분, 30분, 그리고 40분으로 변화시켜 잉여슬러지와 혼합슬러지의 분해 정도를 평가하였다. 잉여슬러지와 혼합슬러지 분해에 대한 $SCOD_{Cr}/TCOD_{Cr}$비의 변화 비교에서 초음파 발진주파수가 40kHz일 때 초음파의 음향밀도가 증가할수록 그리고 조사시간이 길어질수록 $SCOD_{Cr}/TCOD_{Cr}$의 비가 증가함을 보였다. 초음파 전처리 후에 잉여슬러지와 혼합슬러지의 pH는 발진주파수 40kHz에서 음향밀도가 증가할수록 그리고 조사시간이 길어질수록 감소하였다.
The effect of ultrasound pretreatment on sludge degragability was investigated at different condotions: ultrasonic frequency(28, 40, 50kHz), intensity(10, 25, 50W), sonication time(10, 20, 30, 60min). Total suspended solid(TSS) and soluble chemical oxygen demand(SCOD) concentration were measured for the evaluation of pretreatment efficiency. The pretreated sludge was used as the feedstock for anaerobic digestion process. Biogas production and volatile suspended solid(VSS) removal were determined for evaluating the process performance. 1. TSS concentration of the sludge decreased at a constant rate as sonication operation was applied. The degradation rate of TSS increased when ultrasound frequency was decreased from 50kHz to 28kHz and intensity was increased from 10W to 50W. Efficiency of TSS degradation per input energy increased as ultrasonic frequency and intensity were decreased. At the frequency of 28 and 40kHz, SCOD concentration rapidly increased during the initial 30min of sonication time, and then it gradually increased. At 50kHz, SCOD concentration constantly increased for 60min of the sonication time. The SCOD production rate increased with increasing intensity under all ultrasound frequencies. 2. The optimum condition of ultrasound treatment was 28kHz, 50W and 60min for maximizing the biogas production, methane fraction, VSS removal. The highest values in biogas production, methane fraction in biogas, VSS removal were 370ml, 70%, 2.45g, respectively. Methane production rate per input energy increased at ultrasonic frequency and intensity decreased. 3. When raw sludge was pretreated at the condition of ultrasonic frequency of 28 and 40kHz in series, sequential-frequency sonication, intensity of 50W and 60min, biogas production, methane fraction, VSS removal were about the same that of 28kHz single-frequency sonication. When sequential-frequency sonication of 28 and 50kHz was applied in series, biogas production, methane fraction, VSS removal were 356 ~ 423ml, 69 ~ 71%, 2.41 ~ 2.78g, respectively. The pretreatment efficiency of 28-50kHz sequential-frequency sonication which sonication time of 28kHz and 50kHz was 40min and 20min was higher than that of 28kHz single-frequency sonication.
본 연구에서는 생물학적 처리방법으로 염색폐수의 난분해성 유기물질을 효과적으로 처리하기 위한 방안으로 활성슬러지를 Polyethylene glycol(PEG)에 포괄고정화한 담체를 유동상 반응기를 이용하여 난분해성 유기물질의 처리효율을 평가하고 적정 운전인자를 검토하였다. 담체는 내경 4 mm${\times}$높이 4 mm의 원통형으로 미세공극을 가진 PEG재질의 담체를 제조하기 위해 PEG-prepolymer와 미생물을 젤 상태에서 혼합하여 고형화 시켰으며, 이때 담체에 사용된 미생물은 염색폐수에 순응시키지 않은 상태에서 합성되었다. 연속 호기성 유동상 반응기의 유입수는 $SCOD_{Cr}$ 약 330 mg/L, $SBOD_5$ 20 mg/L 이하의 생물학적 처리수를 사용하였고, 체류시간의 변화에 따른 각 반응기의 난분해성 유기물질 제거효율을 비교하였다 생물학적 처리수를 유입수로 하여 동일한 HRT로 운전한 결과 모든 조건에서 45% 이상의 유기물 제거효율을 보였으며, HRT 12 hr이 유기물 제거효율 등을 고려할 때 안정된 효율을 얻을 수 있는 적정 체류시간으로 판단되었다. 특히 기질환경의 변화에 따른 유기물 제거효율의 변화를 확인하기 위하여 생물학적 처리전의 처리장 유입폐수를 처리한 결과 $SCOD_{Cr}$ 70% 이상, $SBOD_5$ 97% 이상의 높은 처리효과를 나타내었다. 포괄고정화 담체를 이용한 염색폐수처리에서 유동상 반응기는 기존 활성슬러지 공정을 대신하거나 혼용하여 적용하는 것이 가능할 것으로 판단되어진다.
본 연구에서는 MBR 공정 내 폭기조에서 순산소 용해와 일반 공기 폭기의 효율에 대한 비교·평가를 통해 순산소의 MBR 공정 적용성에 대해 평가 하였다. 순산소 장치에 의한 유기물 및 암모니아 산화 여부에 대해 평가하였으며, 실폐수(음식물류 폐기물의 혐기성소화 유출수) 적용 과포화산소용해 효율 평가를 진행하였다. 순산소용해와 일반공기폭기 방법의 SCOD, 암모니아 제거율과 속도는 비슷하였다. 하지만, 순산소 용해에 의한 미생물 수율이 일반공기폭기법에 의한 미생물 수율보다 약 0.03 g MLSS-produced/g SCOD-removed 낮아 잉여슬러지 처리 비용이 감소될 수 있을 것이라 판단된다. 음식물류 폐기물의 혐기성 소화 유출수의 고농도 유기물 (4,000 mg/L) 및 암모니아 (1,400 mg/L)의 제거율을 순산소용해와 일반공기폭기법을 비교한 결과, 순산소 용해기가 일반공기폭기법에 비해 유기물 제거율이 약 13% 가량 더 높게 평가되었다. 또한, MLSS의 경우 일반공기폭기법이 순산소장치에 비해 0.3배가량 높았다. 이는, 순산소장치의 경우 폭기조 내에 용존산소가 충분히 유지, 공급되기 때문에 슬러지 자산화가 고도로 진행된 결과로 판단되었다. 따라서, 고농도 유기물을 함유한 폐수 처리를 위한 방법으로는 기존에 많이 사용되었던 일반공기폭기법보다 순산소장치를 활용하는 것이 경제적인 면에서 더 유리할 것으로 판단되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.