• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.21-21
• /
• 2017

Severe lodging has recurrently occurred at strong typhoon's hitting in recent climate change. The identification of quantitative trait loci (QTLs) and their responsible genes associated with a strong culm and their pyramiding are important for developing high-yielding varieties with a superior lodging resistance. To identify QTLs for lodging resistance, the tropical japonica line, Chugoku 117 and the improved indica variety, Habataki were selected as the donor parent, as these had thick and strong culms compared with the temperate japonica varieties in Japan such as Koshihikari. By using chromosome segment substitution lines (CSSLs) in which chromosome segments from the japonica variety were replaced to them from Habataki, we identified the QTLs for strong culm on chrs. 1 and 6, which were designated as STRONG CULM1 (SCM1) and STRONG CULM2 (SCM2), respectively. By using recombinant inbred lines (BILs) derived from a cross between Chugoku 117 and Koshihikari and introgression lines, we also identified the other QTLs for strong culm on chrs. 3 and 2, which were designated as STRONG CULM3 (SCM3) and STRONG CULM4 (SCM4), respectively. Candidate region of SCM1 includes Gn1 related to grain number. SCM2 was identical to APO1, a gene related to the control of panicle branch number, and SCM3 was identical to FC1, a strigolactone signaling associated gene, by performing fine mapping and positional cloning of these genes. To evaluate the effects of SCM1~SCM4 on lodging resistance, the Koshihiakri near isogenic line (NIL) with the introgressed SCM1 or SCM2 locus of Habataki (NIL-SCM1, NIL-SCM2) and the another Koshihikari NIL with the introgeressed SCM3 or SCM4 locus of Chugoku 117 (NIL-SCM3, NIL-SCM4) were developed. Then, we developed the pyramiding lines with double or triple combinations derived from step-by-step crosses among NIL-SCM1 NIL-SCM4. Triple pyramiding lines (NIL-SCM1+2+3, ~ NIL-SCM1+3+4) showed the largest culm diameter and the highest culm strength among the combinations and increased spikelet number due to the pleiotropic effects of these genes. Pyramiding of strong culm genes resulted in much increased culm thickness, culm strength and spikelet number due to their additive effect. SCM1 mainly contributed to enhance their pyramiding effect. These results in this study suggest the importance of identifying the combinations of superior alleles of strong culm genes among natural variation and pyramiding these genes for improving high-yielding varieties with a superior lodging resistance.

• Asia pacific journal of information systems
• /
• v.17 no.3
• /
• pp.79-103
• /
• 2007

The main purpose of this study is to define antecedents that influence e-SCM synchronization and to investigate how it affects e-SCM performance. We, therefore, investigate (1) the impact of firms' internal IT planning capabilities on e-SCM synchronization and on SCM process management capability, (2) the impact of firms' internal IT infrastructure on e-SCM synchronization and on SCM process management capability, (3) the impact of firms' internal SCM process management capabilities on e-SCM synchronization, and finally (4) the impact of e-SCM synchronization on SCM performance. A survey has been administrated to the firms' SCM and marketing staffs and 171 returns analyzed. The results show that (1) IT plan has not direct impacts on e-SCM synchronization, but has direct impacts on organizational support, purchasing, and operations processes except logistics process. IT plan, however, has indirect impacts on e-SCM synchronization through purchasing and operations of SCM process management capability. (2) IT infrastructure has both direct and indirect effects on e-SCM synchronization, and also has direct impacts on organizational support, purchasing, and operations processes except logistics process. (3) SCM process management capabilities have direct impacts on e-SCM synchronization. Among these SCM core processes purchasing positively influences operations, which in turn positively influences logistics process management capability. (4) e-SCM synchronization has positive impacts on SCM performance indicator (SCOR), such as delivery reliability, responsiveness & flexibility, and cost. These results indicate that e-SCM synchronization can be critical to achieve better internal performance like cost and external performance like delivery reliability, responsiveness & flexibility of firms' SCM. In sum, this study demonstrates that the intervening role of e-SCM synchronization between e-SCM performance and IT management capability and between e-SCM performance and SCM core process management capability has been significant in achieving better e-SCM performance. Therefore, it can be suggested that e-SCM performance should be accomplished in consequence of the acceleration of e-SCM synchronization through the enhancement of preceding factors for the e-SCM synchronization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.208-209
• /
• 2016

This study explores how bargaining power and partnership effect on the SCM main results namely flexibility, agility, and control of uncertainty. To test the suggested model, this study used a data set generated from online and offline survey. The 140 sets of data collected, which companies use SCM, were tested against the model using SPSS 23 and smartPLS 3.2.3. The results of this study are as follows. First, Bargaining power had an effect on partnership. Second, partnership had an effect on the SCM agility, flexibility, control of uncertainty.

• Korean Journal of Radiology
• /
• v.21 no.12
• /
• pp.1374-1382
• /
• 2020

Objective: To determine whether ultrasonography at initial presentation can help assess the clinical severity of congenital muscular torticollis (CMT) in infants without a sternocleidomastoid muscle (SCM) mass. Materials and Methods: This retrospective study included 71 infants aged less than 12 months (4.1 ± 2.3 months) with non-mass CMT. The clinical severity was divided into three grades (groups 1-3) based on the degree of lateral head bending or cervical rotation. The difference (SCM-D) and ratio (SCM-R) between the maximal thickness of the affected and non-affected SCMs were obtained using transverse and longitudinal ultrasonography. The sonographic echotexture and echogenicity of the involved SCM were reviewed. Results: A significant difference was observed in the SCM-D (0.42 ± 0.30 mm in group 1; 0.74 ± 0.50 mm in group 2; 1.14 ± 0.85 mm in group 3; p = 0.002) and SCM-R (1.069 ± 0.067 in group 1; 1.129 ± 0.087 in group 2; 1.204 ± 0.150 in group 3; p = 0.001) among the groups when measured along the longitudinal but not along the transverse ultrasonography plane. The areas under the curves of the SCM-R and SCM-D measured by longitudinal ultrasonography were 0.731 (p < 0.001) and 0.731 (p < 0.001) for group 1 versus groups 2-3. The proportions of heterogeneous echotexture or hyperechogenicity in the involved SCM did not differ significantly among the three clinical groups (all p > 0.05). Conclusion: Ultrasonography can aid in assessing the clinical severity of CMT in infants without an SCM mass at the time of initial diagnosis. The SCM-R and SCM-D helped grade the clinical severity when obtained by longitudinal scan.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.4
• /
• pp.233-238
• /
• 2019

The formation behavior of zinc phosphate conversion coating (ZPCC) on SCM430 alloy was investigated in 25 vol.% of 1M ZnO + 170 ml/L solution containing various $Fe(NO_3)_2$ concentrations, using open-circuit potential(OCP), electrochemical impedance spectroscopy(EIS), cyclic polarization(CP) curve and tape peel test. OCP of SCM430 alloy and corrosion current density increased with increasing $Fe(NO_3)_3$ concentration. Resistance of films formed on SCM430 alloy by chemical conversion treatment decreased with increasing $Fe(NO_3)_3$ concentration. Color and adhesion of chemical conversion coatings became darker and worse, respectively, with increasing $Fe(NO_3)_3$ concentration. It is concluded that addition of $Fe(NO_3)_3$ into a zinc phosphating bath leads to faster reaction to form porous surface coatings with poor adhesion and corrosion resistance.

• The Journal of Society for e-Business Studies
• /
• v.7 no.3
• /
• pp.121-137
• /
• 2002

SCM(Supply Chain Management) have been introduced in many companies for integrated management and improvement of business process. Recently, as internet and e-business concept are spread globally, the SCM concept is expanded from one internal company process to inter-company process, it makes a Global SCM concept. In this paper, we discuss the implementation of the Global SCM concept using e-business infrastructure, and propose SCM portal models. Four types of the SCM portal model are discussed, which are forecasting information sharing model, e-Marketplace-typed model, collaboration model and logistics information sharing model. The major concept of the SCM portal is to share information of supply chain process, it provide merits of scale to company. The result of this paper can be summarized as follows : First, the information sharing is very useful in the Global SCM. Second, the e-business infrastructure, especially e-Marketplace can be usefully used for implementation of SCM portal. Third, the M2M(Market to Market) function of e-Marketplace is a major function for implementing SCM portal.

• Journal of Korean Society for Quality Management
• /
• v.34 no.2
• /
• pp.107-121
• /
• 2006

In spite of the increase of the necessity and the interest regarding the SCM in practical business, it is difficult to judge the whole situation of the SCM because the research remain fragmentary as compared with the huge and complicated concept of the SCM. So this study defines dimension of SCM practice and measurements of SCM performance. Through an extensive literature review, the study Identifies seven dimension of SCM practice(partnership, usage of IT tools, information sharing and information quality), five measurements of SCM performance(supply chain flexibility, supply chain integration, customer responsiveness, supplier performance, and partner relationship). Five hypotheses were formulated for the relationship between SCM practice and SCM performance. The important relationships to be tested include ; (1) the direct impact of usage of IT tools on the partnership (2) the direct impact of partnership on the information sharing and information quality (3) the direct impact of SCM practice on the performance of SCM, (4) A moderating effect of top management support on the relationship between SCM practice and SCM performance.

• Journal of Korea Port Economic Association
• /
• v.19 no.2
• /
• pp.221-239
• /
• 2003

In the last decade, the issue of supply chain management(SCM) has emerged as a significant topic in the logistics literature in the developed countries. Also recently the concept of SCM has generated considerable interest in korean firms. However, there has been little systematic analysis of the experience of those companies that have used such SCM philosophy. This paper studies introduction and Application of Korean Trading Companies using SCM philosophy. This study forcuses on how Korean firms can use the SCM by reinforcing their logistics systems. The objectives of this paper are. 1. To develop an understanding of the forces that have created an interest in SCM. 2. To examine the obstacles encountered in implementing SCM. 3. To suggest the impact of the use of SCM and the directions for institutional Development.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.2
• /
• pp.129-143
• /
• 2003

Bsusiness-to- Business transactions requires interactions between diverse application s and business. This gives rise to the need to for a common standard and protocol for exchanging busienss messages. and RosettaNet is the leading industry organization focused on developing B2B process standard for a global supply chain. This paper is intended as an investigation of Build-up Method of SCM Connection applying EC Standard(Rossetta-net) to reduce the integration effort, and improve extensibility and interoperability of an eBusiness infrastructure.-Intiative way for E-commerce applications to quickly incorporate new standards. Supply Chain Management (SCM) helps companies plan and execute supply to meet customer demand. The researches of modem scientists have thrown new light on the subject. but, The study of SCM for EC Standard has been strangely neglected by critics. Consequently, existing SCM system, which require to introduce the functions of EC, needs to be changed. Let me summarize the main points that have been made in this paper. The sharing information for connection and the Rosetta-net standard of the existing SCM system, and PIP 3A4, order management module, of the Rosetta-net specifications for connection by the Rosetta-net. Lastly, That shows the process of the gateway for connecting among the existing SCM systems. This provides felxibility in incorporating any new emerging open standard.

• Management & Information Systems Review
• /
• v.34 no.5
• /
• pp.171-189
• /
• 2015

On the SCM network, there are two type of company, the one which has the powerful position in the decision process is called the leader, and the other company which reacts to the leader's decision is called the follower. This relationship structure effect on the partnership. Therefore this study suggested a research model which would explain the relationship among the bargaining power, partnership, information quality, SCM features. The 116 sets of data collected, which companies use SCM, were tested against the model using SPSS 23 and smartPLS 3.2.3. The results of this study are as follows. First, Bargaining Power had an effect on Influence, Partnership, Information Quality. Second, Influence didn't have an effect on the Partnership and Information Quality. Third, Partnership had an effect on the Information Quality and SCM Flexibility, Agility, Uncertainty Control. Forth, Information Quality had and an effect on the SCM Flexibility, Agility.