• Korean System Dynamics Review
• /
• v.9 no.2
• /
• pp.77-103
• /
• 2008

In order to respond dynamic changes in the global distribution system, the City of Pyeongtaek hope to expand port facilities and its hinterlands. In specific, it plans to designate these areas as free economic zones(FEZ), synthesizing the whole procedures from the development proposals to the operation and management. This paper examines the proposed urban development strategies focused on Pyeongtaek port which still reveals critical weakness as a gateway port backed up by the Seoul Metropolitan Areas. In order to enhance the global competitiveness of Pyeongtaek port, theoretically it depends on Geo Coyle's ACTIFELD methods. In addition to the traditional quantitative data, Coyle's ACTIFELD methods emphasize qualitative approaches, all of which would facilitate structural and systemic analyses of complex social phenomena. Applying ACTIFELD methods, this paper proposes that the City of Pyeongtaek should focus on three alternatives. That is, Pyeongtaek's policy priority should be given to ts he port city based on the key concepts of Supply Chain Management(SCM), Co-opetition supporting city, and waterfront-initiated urban development.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.4
• /
• pp.365-370
• /
• 2017

In this article, a 20 kHz Titanium (Ti) ultrasonic waveguide system for a nano-surface reformation process was designed and fabricated. First, finite element analysis using ANSYS software was performed to find the optimal dimensions. The obtained anti-resonance frequency for the Ti transducer with the piezoelectric device was 20.0 kHz, which value agreed well with the experiment result of 20.1 kHz (0.5% error). To test the system, chromium molybdenum steel (SCM) 435 was chosen as a test-piece. The result proved that the reformed depth was $36{\mu}m$. In addition, hardness was measured before and after the process. The value was changed from 14 HRC to 21 HRC, which is 50% increasing rate. Finally, the friction coefficient test result showed that the surface coefficient was reduced from 0.14 to 0.10 (28.6% reduction). Based on the results, the Ti ultrasonic equipment is regarded as a useful device for nano-scale surface reformation.

• Korean Management Science Review
• /
• v.31 no.2
• /
• pp.1-13
• /
• 2014

In almost all of the organizations, the cost for acquiring and maintaining the inventory takes a considerable portion of the management budget, and thus a certain constraint is set upon the budget itself. The previous studies on inventory control for each item that aimed to improve the fill rate, backorder, and the expenditure on inventory are fitting for the commercially-operated SCM, but show some discrepancies when they are applied to the spare parts for repairing disabled systems. Therefore, many studies on systematic approach concept considering spare parts of various kinds simultaneously have been conducted to achieve effective performance for the inventory control at a lower cost, and primarily, METRIC series models can be named. However, the past studies were limited when dealing with the probability distributions for representing the situation on demand and transportation of the parts, with the (S-1, S) inventory control policy, and so on. To address these shortcomings, the Continuous Time Markov Chain (CTMC) model, which considers the phase-type distributions and the (s, Q) inventory control policies to best describe the real-world situations inclusively, is presented in this study. Additionally, by considering the cost versus the system availability, the optimization of the inventory level, based on this model, is also covered.

• Journal of Korea Port Economic Association
• /
• v.17 no.2
• /
• pp.89-110
• /
• 2001

Recent trends in globalization and informatization underscore the importance of logistics. As a result, there is a need for skilled and specialized logisticians. Third Party Logistics (TPL) and Supply Chain Management (SCM) require logisticians with a broad base of knowledge in areas such as multimodal transport, international trade, information technology computers, finance, operations management, etc. This study conducted a survey to find out the opinions of demanders and suppliers. The results of the surrey show that there are more skilled logisticians in the field of management, computer works in manager level and system management. The survey also found that the certificate exam, which the Ministry of Construction and Transportation started in 1997 as the "Certified Logistics Manager" exam, should have more questions in areas such as foreign languages, computers, logistics information, management skills, etc. To produce better logisticians in Korea, the government will have to invest more into their education, especially near the major ports and metropolitan areas. In addition, it is important that universities and companies work together to provide students with internship and other field-experience teaming opportunities. Logistics education centers should be built at the national level. In addition, the existing certification should be divided into two separate certifications: one for ordinary logistics, and one for international logistics. To further improve the certification system, short-answer or essay questions should be added to the second exam, and an additional certification for the highest level logisticians, a so-called "professional logisticians certificate," needs to be introduced.ntroduced.

• IE interfaces
• /
• v.18 no.3
• /
• pp.234-246
• /
• 2005

A silicon wafer is a highly customized product made to the individual order varying its electrical and physical characteristics. Therefore, it has distinctive supply chain structure that is different from highly standardized commodity product. For high-volume/high-standardization product, it is general that a main stream of information flow initiated by the production planning of the manufacturers is usually directed to push both ways in a supply chain: upstream to the suppliers and downstream to the customers. Contrastingly, for low-volume/high-customization product, the information flow triggered by the fluctuating customer demand usually propagates upward to the suppliers through the manufacturers. Furthermore, for R &D based hi-technology product like silicon wafer, the interactive information feedback mechanism between manufacturer and customer, which is essential to the new product development process, is to be embedded in the supply chain. This article is a case study of supply chain management system of LG Siltron, a major Korean silicon wafer manufacturer. The SCM system entails special information structure fitting well typical high-variety/high-customization product, and also gives application possibilities to the R&D based high-technology product made to the individual customer order.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.923-924
• /
• 2012

Nuclear power is one of energy sources which has the safety and economic feasibility in supply. However, due to the recent disaster in Fukushima, Japan, the safety issue of nuclear power is now come to the fore again. For example, Germany and Italy they cancel some projects on nuclear power launching. In South Korea also, a lot of safety concerns are discussed and small and big accidents occur. Thus, this study suggests the supply chain management system based on RFID to improve safety and efficiency at the same time.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.7
• /
• pp.479-485
• /
• 2001

In this paper, we propose optical subcarrier mutiplexing(SCM) transceiver module for base station(BS) that has no optical source and can be used for full-duplex communication over single optical fiber. In this method we retransmit optical modulated signal to the central office(CO) using loop-back system with a ring type Mach-Zehnder modulator(MZM) in BS, where optical source is transmitted from the CO. We have modeled the ring type MZM and were conformed that the measured results were in good agreement with the modeling. In the ring type MZM, the optical symmetric position of the MZM is very important in RF signal transmission.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.148-154
• /
• 2021

We propose the AI Smart Factory Model for integrated management of production processes in this paper .It is an integrated platform system for the production of food packaging containers, consisting of a platform system for the main producer, one or more production partner platform systems, and one or more raw material partner platform systems while each subsystem of the three systems consists of an integrated storage server platform that can be expanded infinitely with flexible systems that can extend client PCs and main servers according to size and integrated management of overall raw materials and production-related information. The hardware collects production site information in real time by using various equipment such as PLCs, on-site PCs, barcode printers, and wireless APs at the production site. MES and e-SCM data are stored in the cloud database server to ensure security and high availability of data, and accumulated as big data. It was built based on the project focused on dissemination and diffusion of the smart factory construction, advancement, and easy maintenance system promoted by the Ministry of SMEs and Startups to enhance the competitiveness of small and medium-sized enterprises (SMEs) manufacturing sites while we plan to propose this model in the paper to state funding projects for SMEs.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.3-20
• /
• 1995

Development of Real-Time Quality Evaluation of Friction Welding by Acousitc Emission : Report 1 ABSTRACT : According as the friction welding has been increasingly applied in manufacturing various machine components because of its significant economic and technical advantages, one of the important concerns is the reliable quality monitoring method for a good weld quality with both joint strength and toughness in the process of its production. However no reliable nondestructive test method is available at present to determine the weld quality particularly in process of production. So this paper presents an experimental examination and quantitative analysis for the real-time evaluation of friction weld quality by acoustic emission, as a new approach which attempts finally to develop an on-line quality monitoring system design for friction welds using AE techniques. As one of the important results, it was confirmed, through this study, that AE techniques can be reliably applied to evaluating the friction weld qualify with 100% joint strength, as the cumulative AE counts occurring during welding period were quantitatively correlated with reliability at 95% confidence level to the joint strength of welds. Real-Time Evaluation of Automatic Production Quality Control for Friction Welding Machine : Report 2 Abstract : Both in-process quality control and high reliability of the weld is one of the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is available at present to determine the real-time evaluation of automatic production quality control for friction welding machine. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the initial cumulative counts of acoustic emission(AE) occurring during plastic deformation period of the welding and the tensile strength of the welded joints as well as the various welding variables, as a new approach which attempts finally to develop an on-line (or real-time) quality monitoring system and a program for the process of real-time friction welding quality evaluation by initial AE cumulative counts. As one of the important results, it was well confirmed that the initial AE cumulative counts were quantitatively and cubically correlated with reliability of 95% confidence level to the joint strength of the welds, bar-to-bar (SCM4 to SUM31, SCM4 to SUM24L) and that an AE technique using initial AE counts can be reliably applied to real-time strength evaluation of the welded joints, and that such a program of the system was well developed resulting in practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro-structural defects.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.133-136
• /
• 2013

본 논문에서는 오늘날의 경쟁적인 경영환경은 기업들이 공급사슬을 어떻게 관리할 지에 더욱더 관심을 기울이고 있다. 고객들은 제품을 구매하는 데 있어 보다 큰 가치, 보다 빠른 주문여행, 그리고 보다 적극적인 서비스를 강조하고 있다. 공급사슬 관리 응용시스템의 실행과 성과측정을 알아보고 수요주도의 공급사슬 방식을 통하여 공급사슬관리시스템의 비즈니스 운영과 그 가치를 도출하고자 하였다.