• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.101-108
• /
• 1993

$TiO_{2}$/Se : Te heterojunction for color sensor has been fabricated by RF reactive sputtering and thermal evaporation methods onto glass substrate. The optimum deposition condition of $TiO_{2}$ films was such that RF power was 120 W, substrate temperature was $100^{\circ}C$, oxygen concentration was 50%, working pressure was 50 mTorr for the $TiO_{2}$ film thickness of $1000{\AA}$. In this case, the optical transmittance of $TiO_{2}$ film at 550 nm-wavelength was 85%, resistivity was $2{\times}10^9{\Omega}{\cdot}cm$, refractive index was 2.3, and optical bandgap was 3.58 eV. The composition ratio of 0 to Ti by AES analysis was 1.7. When $TiO_{2}$ films were annealed at $400^{\circ}C$ for 30 min. in $O_{2}$ ambient, the optical transmittance of $TiO_{2}$ films at the wavelength range of $300{\sim}580$ nm was improved from 0 to 25%. When Se : Te films were annealed at $190^{\circ}C$ for 1 min., photosensitivity under illumination of 1000 lux was 0.75. The optical bandgap of Se : Te films was 1.7 eV. The structures of Se : Te films were the hexagonal with (100) and (110) orientation. The spectral response of a-Se was improved by the addition of Te, especially in the long wavelength region. The $TiO_{2}$/Se : Te heterojunction showed wide spectral response, and more improved one than that of a-Si film in the blue light region.

• Science of Emotion and Sensibility
• /
• v.19 no.2
• /
• pp.55-66
• /
• 2016

This study was aimed to characterize the color of cotton fabric dyed with three different natural resources such as persimmon, citrus, and brown algae and to propose new trend color themes for fashion color planning for newborn and toddler wear. A variety of color shades by dyeing cotton fabric with persimmon, citrus, and brown algae respectively was obtained and each color was also determined if it could be matched with one of Pantone TPX considering authorized color trends for 2016 Spring/Summer. Finally a group of new trend color theme for 2016S/S newborn and toddler wear were proposed for naturally dyed cotton fabric. As results, the three natural dyeing resources gave color gamut with hue ranging from Purple Blue to Green Yellow and with tones including pale, light grayish, soft, grayish, and dull by their single and compound dyeing. A total of 23 colors matched to Pantone TPX were considered for the fashion color planning by natural dyeing. The selected natural colors were grouped as three different color ways and thereafter the color ways were differentiated in terms of representative color sensibility by using subjective evaluation. Finally three characterized color themes were proposed as 'Serenity', 'Juicy', and 'Fancy', each of which has tried to express differentiated feeling of each natural resources for dyeing, to follow up to global color trends, and to contribute to newborn and toddler wear's own requirements and marketability. These results suggest that natural dyeing colors could be applied into fashion color planning in current fashion industries in order to produce more sensible and emotional design of fashion goods using natural dyeing.

• Science of Emotion and Sensibility
• /
• v.19 no.2
• /
• pp.101-112
• /
• 2016

Selecting appropriate materials can be significantly important to make different image in the product and also give distinguished express to the users. A material for the ceramic product surface consists of the combination between a glaze and a body, and each attribution of materials and the way of the combination creates different texture and color. This study analyzes the difference between visually and tactually sensibility of ceramic surface to through the simulating both visual and tactual stimulation by verbal evaluation method. Totally 13 adjectives are selected from homepage of local and global ceramic product brand. And totally 12 ceramic samples are created with the consideration of color, glossiness and roughness. These 12 samples are the combination between four ceramic bodies (White porcelain, Celadon_c, Sancheong and Black soil) and three glazes (Transparent, Celadon_g, Black glaze). The respondents of first survey were asked to rub, touch and hold before evaluating the sensibility of ceramic surface and other respondents of second survey were asked to evaluate visual images of 9 samples which showed meaningfully difference from first survey. The surface which scored the highest sensibility with the first survey was 'pure' on a surface of White porcelain body with Transparent glaze, and the lowest was also 'pure' on a surface of Black soil body with Transparent glaze. The highest score in the second survey was the same result as the first survey, but the lowest scored 'casual' and the surface was Black soil body with Celadon glaze. By the comparison with two survey results, not every sensibility is same result shown as the first survey and the second survey, but the tactile sensibilities such as 'artistic', 'luxurious', 'sensuous', 'romantic' and 'mysterious' can be experienced by via visual materials of ceramic surfaces.

• Science of Emotion and Sensibility
• /
• v.17 no.3
• /
• pp.129-142
• /
• 2014

Due to the increase of the aged population and population of the disabled today, there is a growing demand for rehabilitation medical instruments. Furthermore, there is a growing demand for evaluation indices for services that should be provided for uses of the rehabilitation medical instruments. In order to evaluate rehabilitation medical instrument designs in this study, the basic index for design evaluations shall be identified to search for assessment plans. Through this, new evaluation indices will be deduced through discussions and analysis of rehabilitation medical experts, biomedical engineers, and designers. The results of this study are summarized as follows. First, the existing design evaluation indices were collected and analyzed to construct 10 rehabilitation medical instrument design evaluation indices and 44 sub-evaluation items. These will be important evaluation standards for designing rehabilitation medical instruments in the future. Second, the design evaluation indices that must be taken into consideration when developing health care rehabilitation medical instruments are the 10 design evaluation indices of usability, cognition, safety, learning, motility, durability, economic feasibility, space, aesthetics and environmental aspects. Third, design evaluation indices of environment, space, cognition, usability, economic feasibility and aesthetics are indices that must be taken into consideration for product design, while learning, safety, motility and durability are factors that must be given special consideration for rehabilitation medical instrument design evaluation indices. Fourth, if existing product design evaluation indices placed importance on environment, space, cognition, usability, economic feasibility and aesthetics of products for design evaluation indices, rehabilitation medical instrument design evaluation indices placed importance on learning, safety, motility and durability on top of usability and economic feasibility, which are the differences between the design evaluation indices of rehabilitation medical instrument and other product designs. The 10 rehabilitation medical device design evaluation indices and 44 sub-evaluation items were carried out in this study. This research is only on the overall rehabilitation medical device design evaluation indices. In future research, the evaluation indices will be applied in the actual rehabilitation medical design device through production of prototypes, while making revisions and supplementations where necessary.

• Journal of Educational Research in Mathematics
• /
• v.24 no.3
• /
• pp.333-357
• /
• 2014

This study resulted from a study regarding creative STEAM System based upon an experiment with the center of gravity. The results of the study are constructed by a fusion of mathematics and physics, showing that they are the same as mathematical calculations. Also, students can find that center of gravity of an object is in equilibrium on a metal rod when the center of gravity exactly is placed on the rod. The fact that an experimental results are correspond to calculations can maximize the effectiveness of teaching. And also this study has the following effectiveness. First, the exact construction and calculations arouses good competition among students. Second, this experiment can give students a motivation for study and increase their thinking in classes because the theoretical background of center of gravity experiment is basically attributed to math and science classes in school. This study includes three different types of center-of-gravity experiments. One is a simple type of experiment in which center of gravity exists inside of an object. Another is a complicated one in which the center of gravity is also inside of an object. However, the third type is an experiment in where the center of gravity is outside of an object. Therefore, it gives students an opportunity to discuss how to confirm equilibrium on a metal rod when the object has its center of gravity outside. Having discussions in class will allow students to have a critical way of thinking. In addition, searching for a way to solve a problem will increase creativity of students as well. And the last type is finding the center of gravity of a big acrylic panel where multiple objects are on the panel. According to the survey and interview conducted by students who participated in this program, teaching based on creative STEAM system helps students to get a better understanding and more fast acquisition of knowledge. We can expect that a well-planned creative STEAM system through a continuous study will be both effective and efficient in educating critical and creative students.

• Development and Reproduction
• /
• v.10 no.3
• /
• pp.159-168
• /
• 2006

Rodents and many other mammals have two chemosensory systems that mediate responses to pheromones, the main and accessory olfactory system, MOS and AOS, respectively. The chemosensory neurons associated with the MOS are located in the main olfactory epithelium, while those associated with the AOS are located in the vomeronasal organ(VNO). Pheromonal odorants access the lumen of the VNO via canals in the roof of the mouth, and are largely thought to be nonvolatile. The main pheromone receptor proteins consist of two superfamilies, V1Rs and V2Rs, that are structurally distinct and unrelated to the olfactory receptors expressed in the main olfactory epithelium. These two type of receptors are seven transmembrane domain G-protein coupled proteins(V1R with $G_{{\alpha}i2}$, V2R with $G_{0\;{\alpha}}$). V2Rs are co-expressed with nonclassical MHC Ib genes(M10 and other 8 M1 family proteins). Other important molecular component of VNO neuron is a TrpC2, a cation channel protein of transient receptor potential(TRP) family and thought to have a crucial role in signal transduction. There are four types of pheromones in mammalian chemical communication - primers, signalers, modulators and releasers. Responses to these chemosignals can vary substantially within and between individuals. This variability can stem from the modulating effects of steroid hormones and/or non-steroid factors such as neurotransmitters on olfactory processing. Such modulation frequently augments or facilitates the effects that prevailing social and environmental conditions have on the reproductive axis. The best example is the pregnancy block effect(Bruce effect), caused by testosterone-dependent major urinary proteins(MUPs) in male mouse urine. Intriguingly, mouse GnRH neurons receive pheromone signals from both odor and pheromone relays in the brain and may also receive common odor signals. Though it is quite controversial, recent studies reveal a complex interplay between reproduction and other functions in which GnRH neurons appear to integrate information from multiple sources and modulate a variety of brain functions.

• Microbiology and Biotechnology Letters
• /
• v.40 no.3
• /
• pp.220-225
• /
• 2012

In order to investigate the ethanol fermentation properties of alcohol yeasts a laboratorial strain (CEN.PK2-1D) and two industrial alcohol yeasts (JHS100 and JHS200) of Saccharomyces cerevisiae were cultured in a pure YP medium with 300 g/L glucose and cassava hydrolysate. Spot assay and cell viability tests showed that both the JHS100 and JHS200 strains exhibited higher ethanol tolerance than the CEN.PK2-1D strain. The JHS100 strain demonstrated the highest cell growth, glucose consumption and ethanol production. In particular, an anaerobic batch fermentation of the JHS100 strain using cassava hydrolysate with 250 g/L glucose resulted in a 106.1 g/L ethanol concentration, 0.42 g/g ethanol yield and 3.15 g/L-hr ethanol productivity, which were 53%, 13%, 53% higher than the corresponding values for the CEN.PK2-1D strain. By changing the pure YP medium to cassava hydrolysate, 19% and 17% decreases in ethanol yield and productivity for the CEN.PK2-1D strain were observed, whereas the cultures of the JHS100 and JHS200 stains showed similar ethanol productivities and only an 8% decrease in ethanol yield. Furthermore, the JHS100 and JHS200 stains produced lower levels of glycerol and acetate byproducts than the CEN.PK2-1D strain. Consequently, the outstanding ethanol fermentation performance of the industrial strains might be owing to rapid cell growth, high ethanol tolerance, low nitrogen requirements and the low formation of by-products.

• Microbiology and Biotechnology Letters
• /
• v.42 no.1
• /
• pp.58-66
• /
• 2014

In the course of study for a use for non-edible parts of broccoli (Brassica oleracea L), and the development of processed food utilizing these parts, edible floret and non-edible stalk were extracted with ethanol and different organic solvent fractions were prepared. With 10 different extracts and fractions, their useful components and various biological activities, such as antioxidant, antimicrobial and anti-proliferation activity, were investigated. The stalk has more abundant water soluble carbohydrate when compared with the floret, and floret has higher hexane-soluble pigments. Analysis of total flavonoid and total polyphenol contents showed that the floret has 1.5~1.99 times higher concentrations than the stalk. Among the fractions, ethylacetate (EA) fractions have the highest amount of total flavonoid and total polyphenol. The stalk and floret possessed 9.45 and 42.01 mg-total flavonoid/g, respectively. In the antioxidation activity assay, the EA fraction of floret showed strong radical scavenging activity and reducing power, while the n-hexane fraction of the stalk exhibited nitrite scavenging activity. In the antimicrobial activity assay, the EA fraction of floret showed a strong and broad-range of antibacterial activity, irrespective of gram positive or gram negative bacteria. In a while, the hexane and EA fractions revealed anti-proliferative effects against the human colorectal cancer cell HCT-116. Strong anti-proliferative activities were found in the hexane fraction of stalk (18.4% of cell viability), and the n-butanol fraction of floret (6.9% of cell viability). Our results suggest that the further study of the characterization of active fractions and the identification of active components from different parts of broccoli are needed to develop functional foods or novel plant-derived medicines.

• Microbiology and Biotechnology Letters
• /
• v.42 no.2
• /
• pp.162-169
• /
• 2014

In the course of study for the development of functional food using red beans (azuki beans, Phaseolus radiatus L.), the ethanol extracts from raw-red bean (RRB) and boiled-red bean (BRB) were prepared, and the components and various biological activities of both were compared. It was observed that the extraction yield, and the total polyphenol content, of the BRB were 1.2 times higher than that of the RRB. However, the contents of total flavonoid, total sugar and reducing sugar in the BRB were 30, 27.9 and 30.8% respectively when compared with those of RRB. In relation to antioxidative activity, both RRB and BRB exhibited moderate DPPH anion, ABTS cation, and nitrite scavenging activities and reducing power, though in all cases RRB demonstrated stronger activities than BRB. The extracts of RRB and BRB did not reveal any antimicrobial activities. In a ${\alpha}$-amylase inhibitory activity assay, RRB was higher than BRB, while BRB showed higher ${\alpha}$-glucosidase inhibitory activity than RRB. A strong and particular activity was observed in an anti-thrombosis activity assay of RRB. The extract of RRB demonstrated strong inhibitions against prothrombin and blood coagulation factors, with moderate thrombin inhibition. However, the extract of BRB did not exhibit any significant anti-thrombosis activity. Our results indicate that RRB has different, but useful biological activities, and loss or elimination of the biologically active substances in RRB occurs during the production of BRB. Therefore, to develop more functional foods from red beans, a study of suitable boiling, heating and drying processes is essential, and the efficient re-use of boiled waste water from the boiling process is necessary. These results could be applied to the further development of functional red bean beverages and sweat red bean pastes.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1159-1170
• /
• 2000

It is necessary to improve the ambient air quality through the proper treatment and control of pollutants by designating air pollutants to regulatory ones. Especially, human took a concern for particulate matters which raised visibility reduction, public health effects and injury of property for urban areas. In order to reduce the effect of particulate matters, we need to establish proper control strategies based on the concentration characteristics of particulate matters. In this study. to evaluate the characteristics of $PM_{2.5}$ and $PM_{10}$. thirty-eight samples of $PM_{2.5}$ and $PM_{10}$ were collected at Nam-Gu sampling site where continuous air monitoring system has been operated, from May, 1999 to November, 1999, and their concentrations for the mass and anion components($Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$) were analyzed. The important conclusions obtained in this study were as followings. Total average mass concentrations of $PM_{2.5}$ and $PM_{10}$ were 35.016 and $50.293{\mu}g/m^3$ respectively. and $PM_{2.5}/PM_{10}$ ratio was calculated 0.692. Total average concentrations of anion components in $PM_{2.5}$ were $1.581(Cl^-)$, $3.690(NO_3{^-})$ and $12.825(SO_4{^{2-}}){\mu}g/m^3$ and those in $PM_{10}$ were $2.471(Cl^-)$, $5.819(NO_3{^-})$ and $14.414(SO_4{^{2-}}){\mu}g/m^3$ respectively. From the correlations analysis. the correlation coefficient between mass concentration of $PM_{2.5}$ and $PM_{10}$ was calculated as 0.945. The correlation coefficients between $PM_{2.5}$ and anion components were analyzed as $Cl^-$(0.025), $NO_3{^-}$(0.788) and $SO_4{^{2-}}$(0.500) respectively, and the correlation coefficients between $PM_{10}$ and anion components were analyzed as $Cl^-$(-0.019), $NO_3{^-}$(0.806) and $SO_4{^{2-}}$)(0.535) respectively.