• The korean journal of orthodontics
• /
• v.43 no.1
• /
• pp.29-34
• /
• 2013

Objective: To examine the prophylactic potential of 3 orthodontic bonding adhesives: Fuji Ortho SC, Illuminate, and Resilience. Methods: Thirty-six Wistar Wag rats were randomly divided into 4 groups consisting of 9 rats each. One of the groups received no treatment and was used as a control. In the other groups, individual bands coated with one of the 3 adhesives were cemented to the lower incisors. Enamel samples were obtained after 6 and 12 weeks and analyzed using scanning electron microscopy in combination with energy dispersive spectrometry. Results: Six weeks after band cementation, no fluoride was found in the enamel of the lower incisors. After 12 weeks, there was no fluoride in the enamel of teeth coated with the Resilience composite. However, in the case of the Illuminate composite and the resin-modified glass ionomer Fuji Ortho SC cement, the depth of fluoride penetration reached $2{\mu}m$ and $4.8-5.7{\mu}m$, respectively. Conclusions: Fluoride ions from orthodontic adhesives can be incorporated into the surface layer of the enamel. Orthodontists may apply orthodontic adhesives, such as the Fuji Ortho SC, to reduce the occurrence of caries during orthodontic treatment with fixed appliances.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.8-15
• /
• 2011

LTE-Advanced aims at peak data rates of 1Gbits/s for the downlink and 500 Mbits/s for the uplink, which can be accomplished only by using wide spectrum allocation of 100MHz as well as advanced multiple input multiple output antenna techniques to the uplink. This paper analyzes the uplink precoding techniques which include LTE codebook of downlink, singular value decomposition codebook, and equal gain transmission codebook over LTE defined single carrier frequency division multiplexing systems. Finally considering nonlinear transmit power amplifier model, it is shown that link-level performance of EGT is superior to those of any other precoding schemes.

• Journal of Ginseng Research
• /
• v.21 no.1
• /
• pp.39-42
• /
• 1997

Dynamic parameters of biochemistry including the contents of soluble carbohydrate (SC) , crude fat (CF) , fatty arid (FA) and soluble protein (SP) in American send (Panax qufnquelolium L.) seed are reported in the present paper. When embryo ratio (ER) increased from 7.31 to 20.48%, the SC content decreased from 4.08 to 1.16%. After that, SC content changed little. The CF content decreased successively from 34.50 to 14.40% from the beginning to the end during the embryo afterripening. The changes of FA content did not correlate with that of ER and the changing range of SP content was not large during the seed stratification. All of these may provide some information for understanding the dormancy mechanisms of American seng seed.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.151-156
• /
• 2015

In order to improve the properties of high-temperature superconducting wire for superconducting cable system, we optimized the electro-polishing (EP), ion-beam assisted deposition (IBAD), superconducting (SC) layer, and baking (heat) treatment. The buffer layer was deposited on electro-polished substrate with RMS roughness ($R_{RMS}$) less than 5 nm. The IBAD process was carried out at $V_{beam}$: 1100 V and $V_{accel}$: 850 V that resulted in highly crystalline film of $LaMnO_3$. Chemical composition of SC layer is key to higher critical current, and we found that composition can be determined by surface color of SC layer. We adopt a proprietary contorl system based on RGB analysis of the surface and achieved critical current of 150 A/4 mm-width. The proposed baking treatment resulted in decreasing of about 10% of fraction defects.

• Korean Journal of Pharmacognosy
• /
• v.43 no.1
• /
• pp.59-65
• /
• 2012

Atopic dermatitis (AD) is a common chronic inflammatory disease of preceding the development of allergic disorders. The incidence of AD is increasing and it causes problems with administrative costs. Therefore, no side effects, easyto- use development of AD treatment is needed. The aim of this study was to evaluate whether PBMCAT, a functional extract from herbal complex was effective to treat the AD mice. AD was induced by patching ovoalbumin on the backside in BALB/ c mouse and then mice were topically treated with PBMCAT. Elidel $cream^{(R)}$ (pimecrolimus, PL) was used as a control. Scratching counts (SC) and clinical skin severity (CSS) were measured, and total serum IgE level was also measured. After inducing AD, SC and CSS were increased. The total serum IgE level was also increased in AD-induced mice. Treatment with PBMCAT significantly decreased SC, CSS, and serum IgE concentration in mice. Especially, treatment of PBMCAT 0.1% in BALB/c mice more effected than PL. These results suggest that the ointment of PBMCAT may enhance the process of AD healing by influencing phase of allergic reacting.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.324-330
• /
• 2019

To recycle raw fly ash (RFA), a waste from thermal power plants, it was used to prepare solid catalysts which have many advantages compared with homogenous catalysts. When biodiesel was produced from soybean oil using RFA, only 1.2% of biodiesel conversion was obtained. A metal hydroxide, NaOH, KOH or $Ca(OH)_2$, was mixed with the acid-treated fly ash (ATFA), and the mixture was calcined at $700^{\circ}C$ for 3 h to prepare the solid catalyst. The solid catalyst prepared by mixing ATFA with NaOH, designated as SC-Na, showed a better performance than those prepared by mixing ATFA with KOH or $Ca(OH)_2$, respectively. The optimal mass ratio of ATFA with NaOH was 1:3, at which the proportion of $Na_2O$ increased to 60.2% in SC-Na, and 97.8% of biodiesel conversion was achieved under optimal reaction conditions (2 w% SC-Na relative to oil and 5 mL-methanol/g-oil at $50^{\circ}C$ for 4 h). Finally, a batch operation was repeatedly carried out to test the feasibility of reusing the solid catalyst, and more than 96% biodiesel conversion was stably achieved for the third round of operations. This study shows that RFA was successfully recycled to solid catalysts through a simple preparation method, and the solid catalyst was reused for the production of biodiesel with high conversion.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.1
• /
• pp.64-68
• /
• 2009

To keep the superconducting (SC) magnet coils of KSTAR at proper operating conditions, not only the coils but also other cold components, such as thermal shields (TS), magnet structures, SC bus-lines (BL), and current leads (CL) must be maintained at their respective cryogenic temperatures. A helium refrigeration system (HRS) with an exergetic equivalent cooling power of 9kW at 4.5K without liquid nitrogen $(LN_2)$ pre-cooling has been manufactured and installed for such purposes. In this proceeding, we will present the commissioning and initial operation results of the KSTAR HRS. Circuits which can simulate the thermal loads and pressure drops corresponding to the cooling channels of each cold component of KSTAR have been integrated into the helium distribution system of the HRS. Using those circuits, the performance and the capability of the HRS, to fulfill the mission of establishing the appropriate operating condition for the KSTAR SC magnet coils, have been successfully demonstrated.

• Korean Circulation Journal
• /
• v.53 no.1
• /
• pp.1-16
• /
• 2023

Recently, single cell RNA sequencing (scRNA-seq) technology has enabled the discovery of novel or rare subtypes of cells and their characteristics. This technique has advanced unprecedented biomedical research by enabling the profiling and analysis of the transcriptomes of single cells at high resolution and throughput. Thus, scRNA-seq has contributed to recent advances in cardiovascular research by the generation of cell atlases of heart and blood vessels and the elucidation of mechanisms involved in cardiovascular development and diseases. This review summarizes the overall workflow of the scRNA-seq technique itself and key findings in the cardiovascular development and diseases based on the previous studies. In particular, we focused on how the single-cell sequencing technology can be utilized in clinical field and precision medicine to treat specific diseases.

• KSBB Journal
• /
• v.16 no.3
• /
• pp.241-245
• /
• 2001

Mass transfer rates have been measured for the extraction of enzyme from aqueous solution into a reverse-micelle phase at $25^{\circ}C$. The 420 mL vessel was carefully designed to maintain a planar interface between the aqueous and solvent phases, so allowing precise measurement of interfacial area, has been investigated. Sodium di-2-ethylhexyl sulfosuccinate(AOT) was the surfactant used. Factors varied included: agitator speed, pH, ionic strength and surfactant concentration. Samples were taken from the solvent phase at 15min intervals, and the amount of enzyme extracted was measured by UV absorption at 280 nm. The observed Sherwood numbers for the aqueous phase $Sh_1$were correlated interms of the aqueous phase Reynolds number $Re_1$, and modified Schmidt number $Sc_1$. $Sh_1=0.664Re_1^{0.5}Sc_1^{0.33}$

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1755-1762
• /
• 2016

In this paper, a small areal dual-output SC(switched capacitor) DC-DC converter with a improved range of an input voltage is presented. The conventional SC DC-DC converter has an advantage of low cost and small chip area. But, it has a narrow input voltage range to convert efficiently. Also, it has a lager chip area and a lower power efficiency from multiple outputs. The proposed SC DC-DC converter improves the power efficiency by using the capacitor array structure which efficiently converts the voltage according to the input voltage. By sharing two switch array, it reduces the number of switches and capacitors from 32 to 25. The proposed SC DC-DC converter was manufactured in a $0.18{\mu}m$ CMOS process. In the simulation, the range of the input voltage is 0.7~ 1.8V, the max. power efficiency is 90%, and the chip area is $0.255mm^2$.