• 전자공학회논문지
• /
• 제51권11호
• /
• pp.26-32
• /
• 2014

단일반송파기반 주파수다중화(SC-FDM) 방식은 각 사용자 입장에서는 단일반송파 전송 방식으로 피크대 평균 전력비(PAPR)가 낮다는 장점이 있어 전송전력에 제한이 있는 3GPP LTE의 상향링크 전송방식으로 채택되었다. 일반적으로 SC-FDM 신호의 수신은 주파수 영역 등화기를 사용하는데 이는 채널에 깊은 널(null)이 존재하는 경우 잉여의 심볼 간 간섭과 잡음의 증폭이 커지는 문제점이 있다. 본 논문에서는 이러한 문제를 개선하기 위하여 주파수 영역 터보 등화기를 사용하는 SC-FDM 수신기를 제안하고 이의 링크레벨 성능을 평가한다. 또한, 성능-복잡도 교환(Tradeoff)을 고려한 적절한 반복 횟수를 제시한다.

• 반도체디스플레이기술학회지
• /
• 제15권2호
• /
• pp.1-5
• /
• 2016

3D printer is the equipment of the system for sequentially layer laminated in the materials. Now 3D printer used in various fields such as, semiconductor, electricity automobile, medical and various types of output method and material. In this paper, we studied about the improvement on warpage due to shrinkage of product from 3D printer of FDM(Fused Deposition Modeling) type, we proposed measures systematically to solve warpage problem using of 6SC(6 Step Creativity) method of practical TRIZ. After experimented with product prototypes experiment, we verified effect about solution.

• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.70-75
• /
• 2018

In this paper, we have studied the deformation problem of the scaffold caused by the FDM type 3D printer. The DOE (Design of experiment) and 3SC was used to solve the deformation problem of the scaffold generated from the adhesion surface between the scaffold and the bed. The methodology was used to derive the solution and the experiment was conducted on the derived solution. As a result of evaluating the experimental results obtained for the solution, it was found that the deformation of the scaffold was much improved. By using the DOE, We were possible to derive the output condition of scaffold.

• 한국음향학회지
• /
• 제35권1호
• /
• pp.1-7
• /
• 2016

본 논문은 서해의 수중음향 통신 네트워크의 물리계층에 적합한 수중음향통신 시스템을 제안한다. 서해정점의 해양 관측정보와 Bellhop 음선 추적프로그램을 이용하여 서해정점의 수중 채널 모델을 구하고 이 수중 채널 모델을 이용하여 통신 변수들을 산출하고 다이버시티 기법이 응용된 CDMA(Code Division Multiple Access)와 SC-FDM(Single Carrier-Frequency Division Multiplexing) 전송방식을 이용한 음향 통신시스템을 설계한다. 설계된 통신시스템의 성능을 검증하기 위해 여러 통신환경에 대한 비트 오류율과 데이터 전송률을 연산하고 이로부터 서해안에서 긴 지연시간을 가지는 수중 채널과 낮은 Eb/No에서 사용가능한 수중 음향통신 기법을 제안한다.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.25-30
• /
• 2019

In this paper, we have analyzed manufacturing problems of the scaffold with pores using FDM 3D printer and PLGA. We suggested the solutions using 3SC practical TRIZ. We selected the final solution used machine learning. We reduced number of experiments using most influential factor after analysis print factors. We printed the scaffold and measured pore size. We created the regression model using python tensorflow. The print condition data of measured pore size was used as training data. We predicted the pore size of printed condition using regression model. We printed the scaffold using the predicted the print condition data. We quantitatively compare the predicted scaffold pore size data and the measured scaffold pore size data. We got satisfactory result.

• Journal of Communications and Networks
• /
• 제9권1호
• /
• pp.34-42
• /
• 2007

Orthogonal frequency division multiplexing (OFDM) combined with time division multiplexing (TDM), in this paper called OFDM/TDM, can overcome the high peak-to-average-power ratio (PAPR) problem of the conventional OFDM and improve the robustness against long time delays. In this paper, the bit error rate (BER) performance of OFDM/FDM in a frequency-selective Rayleigh fading. channel is evaluated by computer simulation. It is shown that the use of frequency-domain equalization based on minimum mean square error criterion (MMSE-FDE) can significantly improve the BER performance, compared to the conventional OFDM, by exploiting the channel frequency-selectivity while reducing the PAPR or improving the robustness against long time delays. It is also shown that the performance of OFDM/FDM designed to reduce the PAPR can bridge the conventional OFDM and single-carrier (SC) transmission by changing the design parameter.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.25-29
• /
• 2017

In this paper, we have studied the deformation problem of the scaffold caused by the FDM type 3D printer. The Practical TRIZ technique was used to solve the deformation problem of the scaffold generated from the adhesion surface between the scaffold and the bed. The Practical TRIZ methodology was used to derive the solution and the experiment was conducted on the derived solution. As a result of evaluating the experimental results obtained for the solution, it was found that the deformation of the scaffold was much improved to the satisfactory level.