Journal of the Semiconductor & Display Technology (반도체디스플레이기술학회지)

The Korean Society Of Semiconductor & Display Technology (한국반도체디스플레이기술학회)
권호 표지

A Study on Manufacturing Condition of PLGA Scaffold Using 3SC Practical TRIZ and Design of Experiments

3SC 실용트리즈와 실험계획법을 이용한 PLGA인공지지체 제작조건에 관한 연구

  • Lee, Song-Yeon (Mechatronics Engineering, Graduate School of Korea University of Technology and Education) ;
  • Huh, Yong Jeong (Department of Mechatronics Engineering, Korea University of Technology and Education)
  • 이송연 (한국기술교육대학교대학원 메카트로닉스공학과) ;
  • 허용정 (한국기술교육대학교 메카트로닉스공학부)
  • Received : 2018.12.10
  • Accepted : 2018.12.22
  • Published : 2018.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we have studied the deformation problem of the scaffold caused by the FDM type 3D printer. The DOE (Design of experiment) and 3SC was used to solve the deformation problem of the scaffold generated from the adhesion surface between the scaffold and the bed. The methodology was used to derive the solution and the experiment was conducted on the derived solution. As a result of evaluating the experimental results obtained for the solution, it was found that the deformation of the scaffold was much improved. By using the DOE, We were possible to derive the output condition of scaffold.

Keywords

References

  1. Dong-Woo Cho and Seung-Jae Lee, "Scaffold Technic Trend of Tissue Engineering," J. of Korean Institute of Electrical and Electronic Material Engineering, Vol. 18, No. 5, pp. 32-38, (2005).
  2. Min-Woo Sa, Seon-Woong Choi, Jae-Wook Lee and Jong-Yeong Kim, "Fabrication of PCL Scaffolds According to Various Pore Patterns Using Polymer Deposition System and Design of Experiments," J. of Korean Society of Mechanical Engineering, Vol. 41, No. 7, pp. 645-653, (2017).
  3. Min-Woo Sa, Hae-Ri Shim and Jong-Yeong Kim, "Experimental Research of ZrO2/BCP/PCL Scaffold with Complex Pore Pattern for Bone Tissue," J. of Korean Society of Mechanical Engineering, Vol. 39, No. 11, pp. 1153-1159, (2015). https://doi.org/10.3795/KSME-A.2015.39.11.1153
  4. Sung-Woo Ha and Jong-Yeong Kim, "Fabrication and Evaluation of Hybrid Scaffold by Nano-Micro Precision Deposition System," J. of Korean Society of Mechanical Engineering, Vol. 38, No. 8, pp. 875-880, (2014). https://doi.org/10.3795/KSME-A.2014.38.8.875
  5. Min-Woo Sa, Hae-Ri Shim and Jong-Yeong Kim, "A Study on Fabrication of 3D Porous Scaffold Combined with Polymer Deposition System and a Salt Leaching Method," J. of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 86-92, (2016). https://doi.org/10.14775/ksmpe.2016.15.5.086