• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.340.2-340
• /
• 2002

• Journal of Korean Society of Steel Construction
• /
• v.22 no.5
• /
• pp.487-496
• /
• 2010

The structural damping ratios for seismic design of nuclear power plant structures are specified in Regulatory guide 1.61 of the United States NRC for RC structures of 4%(OBE) and 7%(SSE), and for steel structures of 3%(OBE) and 4%(SSE), but not for steel-plate concrete (SC) structures that have been developed recently. The objective of this study is to investigate the damping ratios of SC structures by identifying the relative differences in the damping ratios between RC and SC structures. An experimental study was performed on four specimens, RC-S, RC-M, SC-S and SC-M, where S stands for shear-governed and M for moment-governed. The conducted method was free vibration testing by rupturing a brittle steel plate that linked the actuator and the mass center. The test results were analyzed to determine fundamental frequencies and damping ratios at various load levels. By examining the relative differences in damping ratios of four specimens, it is proposed for SC structures to use the same damping ratio of 4% as RC one at OBE, but 1% less damping ratio than RC one resulting in 6% at SSE.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.387-412
• /
• 2003

Influence of gelatinase on basement membrane (BM) structure was investigated by using a skin equivalent (SE) model. The results showed that (1) gelatinase produced by cells degraded the BM and (2) the addition of matrix metalloproteinase-specific inhibitor to the SE medium accelerated the formation of BM structure, indicating that gelatinase is involved in BM impairment. The activity of gelatinase was also studied in healthy human facial skin tissues. The result of in situ zymography revealed gelatinase activity around the basal layer of the epidermis, where BM integrity was severely compromised. Therefore, this enzyme was suggested to be associated with BM decomposition in human facial skin. To assess the behavior of gelatinase in stratum corneum (SC) non-invasively, an immunological study was performed. Since positive immunostaining of pro-gelatinase B was observed in SC stripped from sun-exposed skin, whereas no positive staining detected in SC of non-irradiated skin, gelatinase in the epidermis could be non-invasively detected by measuring gelatinase in SC. Gelatinase in SC of healthy female volunteers was monitored using a special film that sensitively and conveniently detects gelatinase. Ninetr percent of SC from facial skin (l00 women, 40's-50's) was gelatinase-positive. On the other hand, SC from non-irradiated skin was negative. These results strongly suggest that (1) gelatinase is constantly produced in the facial epidermis of most middle-aged woman during their daily life, and (2) the enzyme might be involved in the aging-related degeneration of both BM and the matrix fibers of the upper layer of the dermis, acting as a very important aging factor. Strong inhibitory activity against gelatinase was found in turmeric extract and identified curcumin as the major ingredient. Topical application of cream containing turmeric extract significantly decreased the number of gelatinase-positive SC clusters in human facial skins. These results indicated that turmeric is an effective ingredient to prevent skin from photo aging by suppressing chlonically upregulated gelatinase activity by UV and to improve skin condition.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.993-999
• /
• 2001

Phase formation and proton conduction in BaO doped LaSc $O_3$with perovskite structure were studied. L $a_{0.6}$B $a_{0.4}$Sc $O_{2.8}$, viz. 40at% $Ba^{2+}$ ion doped composition, showed a single cubic phase, while the other compositions doped less than 30 at% $Ba^{2+}$ ion showed the cubic phase and the orthorhombic one. Above $650^{\circ}C$ oxygen ion conduction was dominant in $N_2$atmosphere and below this temperature proton conduction was observed in wet atmosphere. All compositions were found to be the pure proton conductors below 30$0^{\circ}C$. The proton conductivity (bulk) of L $a_{0.6}$B $a_{0.4}$Sc $O_{2.8}$ was higher than those of any other composition.osition.ion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.19-26
• /
• 2021

The lattice structure is attracting attention from industry because of its excellent strength and stiffness, ultra-lightweight, and energy absorption capability. Despite these advantages, widespread commercialization is limited by the difficult manufacturing processes for complex shapes. Additive manufacturing is attracting attention as an optimal technology for manufacturing lattice structures as a technology capable of fabricating complex geometric shapes. In this study, a unit cell was formed using a three-dimensional coordinate method. The relative density relational equation according to the boundary box size and strut radius of the unit cell was derived. Simple cubic (SC), body-centered cubic (BCC), and face-centered cubic (FCC) with a controlled relative density were designed using modeling software. The accuracy of the equations for calculating the relative density proposed in this study secured 98.3%, 98.6%, and 96.2% reliability in SC, BCC, and FCC, respectively. A simulation of the lattice structure revealed an increase in compressive yield load with increasing relative density under the same cell arrangement condition. The compressive yield load decreased in the order of SC, BCC, and FCC under the same arrangement conditions. Finally, structural optimization for the compressive load of a 20 mm × 20 mm × 20 mm structure was possible by configuring the SC unit cells in a 3 × 3 × 3 array.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.455-458
• /
• 2009

In this research, the effect of Sc on the micro structure and mechanical properties of Al-20Si alloy powders and their extruded bar was investigated. The Al-20wt%Si and Al-20wt%Si-0.6wr%Sc powders were produced by gas atomization. The micro structures of the alloy powders and extrude was examined by optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The alloy powders were subsequently canned, degassed and extruded in order to produce the alloy bulk. It was found that the micro structure of the Al-20Si alloy powder was refined and the mechanical properties was significantly improved by the addition of 0.6Sc.

• Structural Engineering and Mechanics
• /
• v.80 no.5
• /
• pp.609-623
• /
• 2021

Buckling restrained bracing (BRB) was firstly introduced in Japan construction industry in year 1989. With time, BRB performance has been advanced to self-centering BRB (SC-BRB) which has exceptional energy dissipation, addressing the improvement in the structure performance in post-seismic affect. Although the BRB performance specifications are defined in design codes of several countries, specific design provisions are not generally provided since BRBs are usually considered a manufactured device. Furthermore, most of review papers focused on BRB rather than SC-BRB. Thus, this paper explores the background of both BRB and SC-BRB. The importance of self-centering components in BRB and literature related to it have been studied. This review study also highlights the significance of corrosion-resistance materials in the configuring BRB and SC-BRB since most of such members are made of carbon steel that is susceptible to corrosion.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.5
• /
• pp.23-32
• /
• 2012

Research on steel plate concrete (SC) structures for the modularization of nuclear power plants have been performed recently in Korea. In this study, the seismic capacity and stiffness characteristics of unstiffened SC shear walls under the effects of earthquakes were investigated through static pushover tests. Failure modes, sectional strength, and stiffness characteristics of SC structures under lateral loads were inspected by analyzing the experimental results. The strengths obtained by the experiments were also compared with those derived by the design code of the SC structures. One of the main failures of unstiffened SC shear walls was found to be the type of bending shear failure due to the debonding of the steel plate at the concrete interface. The ductility capacity of SC structures was also confirmed to be improved, which is considered to be a confining effect on steel plates in the longitudinal behavior of SC structures.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1284-1288
• /
• 2021

In this work, we propose and design a GaN-based diode with a p-doped GaN (p-GaN) multi-well structure for high efficiency betavoltaic (BV) cells. The short-circuit current density (J_SC) and opencircuit voltage (V_OC) of the devices were investigated with variations of parameters such as the doping concentration, height, width of the p-GaN well region, well-to-well gap, and number of well regions. The J_SC of the device was significantly improved by a wider depletion area, which was obtained by applying the multi-well structure. The optimized device achieved a higher output power density by 8.6% than that of the conventional diode due to the enhancement of J_SC. The proposed device structure showed a high potential for a high efficiency BV cell candidate.

• Korean Medical Education Review
• /
• v.17 no.2
• /
• pp.60-68
• /
• 2015

The majority of medical educators agree that scientific education is critical to the development of physician-scientists. However, the proportion of physicians interested or engaged in research has been decreasing. To overcome this deficit of research oriented physicians, many medical schools in the United States have introduced scholarly concentration (SC) programs into their medical curricula since 2000. In contrast, Korea has very few medical schools with such programs. Research programs at American medical schools were surveyed and investigated in order to better design and develop SC programs appropriate for Korean medical schools. Information on SC programs was gathered by reviewing medical school web sites and related articles. The SC programs of Brown Alpert Medical School, University of Pittsburgh School of Medicine, Duke University School of Medicine, and Stanford University School of Medicine are discussed in depth. The characteristics of each program were organized into seven parts: program description, administrative structure, orientation, curricular content, mentors and mentoring, student evaluation, and challenges. For a successful SC program in Korea we must consider providing guaranteed time for SC programs with necessary modifications in the core medical curriculum, educating and training of mentors, providing orientation and motivating students to pursue research, developing curricula for SC programs, and evaluating the progress of SC projects.