DOI QR코드

DOI QR Code

A review on BRB and SC-BRB members in building structures

  • Haider, Syed Muhammad Bilal (Department of Civil and Environmental Engineering, Incheon National University) ;
  • Lee, Dongkeun (Department of Civil and Environmental Engineering, Southern University and A&M College)
  • Received : 2021.02.27
  • Accepted : 2021.10.21
  • Published : 2021.12.10

Abstract

Buckling restrained bracing (BRB) was firstly introduced in Japan construction industry in year 1989. With time, BRB performance has been advanced to self-centering BRB (SC-BRB) which has exceptional energy dissipation, addressing the improvement in the structure performance in post-seismic affect. Although the BRB performance specifications are defined in design codes of several countries, specific design provisions are not generally provided since BRBs are usually considered a manufactured device. Furthermore, most of review papers focused on BRB rather than SC-BRB. Thus, this paper explores the background of both BRB and SC-BRB. The importance of self-centering components in BRB and literature related to it have been studied. This review study also highlights the significance of corrosion-resistance materials in the configuring BRB and SC-BRB since most of such members are made of carbon steel that is susceptible to corrosion.

Keywords

Acknowledgement

The authors appreciate the meaningful advice of Dr. Young-Chan You.

References

  1. Abou-Elfath, H., Ramadan, M. and Alkanai, F.O. (2017), "Upgrading the seismic capacity of existing RC buildings using buckling restrained braces", Alex. Eng. J., 56(2), 251-262. https://doi.org/10.1016/j.aej.2016.11.018.
  2. Aguaguina, M., Zhou, Y. and Zhou, Y. (2019), "Loading protocols for qualification testing of BRBs considering global performance requirements", Eng. Struct., 189, 440-457. https://doi.org/10.1016/j.engstruct.2019.03.094.
  3. AISC (2010), AISC 341-10, Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, IL.
  4. Al-Sunna, R., Pilakoutas, K., Hajirasouliha, I. and Guadagnini, M. (2012), "Deflection behaviour of FRP reinforced concrete beams and slabs: An experimental investigation", Compos. Part B: Eng., 43(5), 2125-2134. https://doi.org/10.1016/j.compositesb.2012.03.007.
  5. Alashkar, Y., Nazar, S. and Ahmed, M. (2015), "A comparative study of seismic strengthening of RC buildings by steel bracings and concrete shear walls", Int. J. Civil Struct. Eng. Res., 2(2), 24-34.
  6. AISC (2011), Seismic Provisions for Structural Steel Buildings, ANSI/AISC 341-10.
  7. Ammar, M.A. (2014), "Bond durability of Basalt Fibre-Reinforced Polymers (BFRP) bars under freeze-and-thaw conditions", Masters of Science, Universite Laval, Canada.
  8. Amran, Y.H.M., Alyousef, R., Rashid, R.S.M., Alabduljabbar, H. and Hung, C.C. (2018), "Properties and applications of FRP in strengthening RC structures: A review", Struct., 16, 208-238. https://doi.org/10.1016/j.istruc.2018.09.008.
  9. Angst, U.M. (2018), "Challenges and opportunities in corrosion of steel in concrete", Mater. Struct., 51(1), 1-20. https://doi.org/10.1617/s11527-017-1131-6
  10. Atlayan, O. and Charney, F.A. (2014), "Hybrid buckling-restrained braced frames", J. Constr. Steel Res., 96, 95-105. https://doi.org/10.1016/j.jcsr.2014.01.001.
  11. Chi, H. and Liu, J. (2012), "Seismic behavior of post-tensioned column base for steel self-centering moment resisting frame", J. Constr. Steel Res., 78, 117-130. https://doi.org/10.1016/j.jcsr.2012.07.005.
  12. Choi, Y.C., Choi, H.K., Lee, D. and Choi, C.S. (2015), "Shear strength of unreinforced masonry wall retrofitted with fiber reinforced polymer and hybrid sheet", Int. J. Polym. Sci., 2015, Article ID 863057. https://doi.org/10.1155/2015/863057.
  13. Choi, H. and Kim, J. (2006), "Energy-based seismic design of buckling-restrained braced frames using hysteretic energy spectrum", Eng. Struct., 28(2), 304-311. https://doi.org/10.1016/j.engstruct.2005.08.008.
  14. Chou, C.C., Chen, Y.C. and Chen, S.Y. (2013), "Test and computer modeling of steel braces for earthquake-resistant structures: dual-core self-centering brace and sandwiched buckling-restrained brace", 2nd International Conference on Advances in Computer Science and Engineering (CSE 2013) Test, 49-53. https://doi.org/10.2991/cse.2013.13.
  15. Chou, C.C. and Chen, J.H. (2011), "Development of floor slab for steel post-tensioned self-centering moment frames", J. Constr. Steel Res., 67(10), 1621-1635. https://doi.org/10.1016/j.jcsr.2011.04.006.
  16. Chou, C.C. and Chen, Y.C. (2015), "Development of steel dual-core self-centering braces: Quasi-static cyclic tests and finite element analyses", Earthq. Spectra, 31(1), 247-272. https://doi.org/10.1193/082712EQS272M.
  17. Chou, C.C., Chen, Y.C., Pham, D.H. and Truong, V.M. (2014), "Steel braced frames with dual-core SCBs and sandwiched BRBs: Mechanics, modeling and seismic demands", Eng. Struct., 72, 26-40. https://doi.org/10.1016/j.engstruct.2014.04.022.
  18. Chou, C.C. and Chung, P.T. (2014), "Development of cross-anchored dual-core self-centering braces for seismic resistance", J. Constr. Steel Res., 101, 19-32. https://doi.org/10.1016/j.jcsr.2014.04.035.
  19. Chou, C.C., Chung, P.T. and Cheng, Y.T. (2016), "Experimental evaluation of large-scale dual-core self-centering braces and sandwiched buckling-restrained braces", Eng. Struct., 116, 12-25. https://doi.org/10.1016/j.engstruct.2016.02.030.
  20. Chou, C.C., Tsai, W.J. and Chung, P.T. (2016), "Development and validation tests of a dual-core Self-Centering Sandwiched Buckling-Restrained Brace (SC-SBRB) for seismic resistance", Eng. Struct., 121, 30-41. https://doi.org/10.1016/j.engstruct.2016.04.015.
  21. Chou, C.C., Wu, T.H., Beato, A.R.O., Chung, P.T. and Chen, Y.C. (2016), "Seismic design and tests of a full-scale one-story one-bay steel frame with a dual-core self-centering brace", Eng. Struct., 111, 435-450. https://doi.org/10.1016/j.engstruct.2015.12.007.
  22. Chu, X., Qing, M. and Wang, Y. (2019), "Effect of chloride ion on metal corrosion behavior under pinhole defect of coating studied by wbe technology", Corros. Protect., 40(1), 23-27. https://doi.org/10.11973/fsyfh-201901005.
  23. Clark, P., Aiken, I., Kasai, K., Ko, E. and Kimura, I. (1999), "Design procedures for buildings incorporating hysteretic damping devices", Proceedings of the 68th Annual Convention SEAOC, 355-371. Tokyo.
  24. Davis, J.R. (1999), Corrosion of Aluminum and Aluminum Alloys, Asm International.
  25. Ding, Y. and Liu, Y. (2020), "Cyclic tests of assembled self-centering buckling-restrained braces with pre-compressed disc springs", J. Constr. Steel Res., 172, 106229. https://doi.org/10.1016/j.jcsr.2020.106229.
  26. Di Sarno, L., Elnashai, A.S. and Nethercot, D.A. (2006) "Seismic retrofitting of framed structures with stainless steel", J. Constr. Steel Res., 62(1-2), 93-104. https://doi.org/10.1016/j.jcsr.2005.05.007.
  27. Dongdong, S. (2015), "Study on corrosion mechanism and evolution of waterborne acrylic acid on coating/metal interface", Beijing University of Science and Technology, Beijing, China.
  28. Dusicka, P. and Tinker, J. (2013), "Global restraint in ultra-lightweight buckling-restrained braces", J. Constr. Steel Res., 17(1), 139-150. https://doi.org/10.1061/(asce)cc.1943-5614.0000320.
  29. Eatherton, M.R., Fahnestock, L.A. and Miller, D.J. (2014), "Self-centering buckling restrained brace development and application for seismic response mitigation", NCEE 2014-10th U.S. National Conference on Earthquake Engineering: Frontiers of Earthquake Engineering.
  30. Eatherton, M., Hajjar, J., Deierlein, G., Ma, X. and Krawinkler, H. (2010), "Hybrid simulation testing of a controlled rocking steel braced frame system", 9th US National and 10th Canadian Conference on Earthquake Engineering 2010, Including Papers from the 4th International Tsunami Symposium, Toronto, July.
  31. Eatherton, M.R., Fahnestock, L.A. and Miller, D.J. (2014), "Computational study of self-centering buckling-restrained braced frame seismic performance", Earthq. Eng. Struct. Dyn., 43(13), 1897-1914. https://doi.org/10.1002/eqe.2428.
  32. Erochko, J., Christopoulos, C. and Tremblay, R. (2015), "Design and testing of an enhanced-elongation telescoping self-centering energy-dissipative brace", J. Struct. Eng., 141(6), 04014163. https://doi.org/10.1061/(asce)st.1943-541x.0001109.
  33. Farghaly, A.A. (2014), "Evaluation of seismic retrofitting techniques used in old reinforced concrete buildings", IOSR J. Eng., 4(6), 14-22. https://doi.org/10.9790/3021-046401422.
  34. Fujimoto, M., Wada A., Saeki, E., Watanabe, A. and Hitomi, Y. (1988), "A study on the unbonded brace encased in buckling restraining concrete and steel tube", J. Struct. Constr. Eng., 34B, 249-258.
  35. Gancedo, J.R., Alonso, C., Andrade, C. and Gracia, M. (1989), "Technical Note: AES study of the passive layer formed on iron in saturated Ca(OH)2 solutions", Corros. Houston Texas, 45, 976-977.
  36. Garden, H.N. and Hollaway, L.C. (1998), "An Experimental study of the influence of plate end anchorage of carbon fibre composite plates used to strengthen reinforced concrete beams", Compos. Struct., 42(2), 175-188. https://doi.org/10.1016/S0263-8223(98)00070-1.
  37. Hollaway, L.C. (2010), "A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties", Constr. Build. Mater., 24(12), 2419-2445. https://doi.org/10.1016/j.conbuildmat.2010.04.062.
  38. Hoveidae, N., Tremblay, R., Rafezy, B. and Davaran, A. (2015), "Numerical investigation of seismic behavior of short-core all-steel buckling restrained braces", J. Constr. Steel Res., 114, 89-99. https://doi.org/10.1016/j.jcsr.2015.06.005.
  39. Hoveidae, N. (2019), "Multi-material core as self-centering mechanism for buildings incorporating BRBs", Earthq. Struct., 16(5), 589-599. https://doi.org/10.12989/eas.2019.16.5.589.
  40. Hussain, S., Benschoten, P.V., Satari, M.A. and Lin, S. (2006), "Buckling Restrained Braced Frame (BRBF) structures: analysis, design and approvals issues", The 75th SEAOC Annual Convention, September.
  41. ISO (2014), ISO 15510:2014 Stainless Steels-Chemical Composition.
  42. Jiang, T., Dai, J., Yang, Y., Liu, Y. and Bai, W. (2020), "Study of a new-type of steel buckling-restrained brace", Earthq. Eng. Eng. Vib., 19(1), 239-256. https://doi.org/10.1007/s11803-020-0559-9.
  43. Kanyilmaz, A. (2017), "Role of compression diagonals in concentrically braced frames in moderate seismicity: A full scale experimental study", J. Constr. Steel Res., 133, 1-18. https://doi.org/10.1016/j.jcsr.2017.01.023.
  44. Kiggins, S. and Uang, C.M. (2006), "Reducing residual drift of buckling-restrained braced frames as a dual system", Eng. Struct., 28, 1525-1532. https://doi.org/10.1016/j.engstruct.2005.10.023.
  45. Kimura, K., Yoshioka, K., Takeda, T., Fukuya, Z. and Takemoto, K. (1976), "Tests on braces encased by mortar in-filled steel tubes", Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, 1041, 1-42.
  46. Koch, G.H., Brongers, M.P.H., Thompson, N.G., Virmani Y.P., and Payer, J.H. (2002), "Corrosion costs and pre ventive stratagies in the United States", Mater. Perform., 42, 1-12.
  47. Lanning, J.T. (2014), "Using buckling-restrained braces on long-span bridges near seismic faults", Dissertation, University of California, San Diego.
  48. Lee, D. and Shin, A.H.C. (2016), "Finite element study on the impact responses of concrete masonry unit walls strengthened with fiber-reinforced polymer composite materials", Compos. Struct., 154, 256-268. https://doi.org/10.1016/j.compstruct.2016.07.063.
  49. Lee, D. and Cheng, L. (2011), "Assessing the strengthening effect of various near-surface-mounted FRP reinforcements on concrete bridge slab overhangs", J. Compos. Constr., 15(4), 615-624. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000182.
  50. Lee, D. and Cheng, L. (2013), "Bond of NSM systems in concrete strengthening-Examining design issues of strength, groove detailing and bond-dependent coefficient", Constr. Build. Mater., 47, 1512-1522. https://doi.org/10.1016/j.conbuildmat.2013.06.069.
  51. Lee, D., Cheng, L. and Hui, J.Y.G. (2013), "Bond characteristics of various NSM FRP reinforcements in concrete", J. Compos. Constr., 17(1), 117-129. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000318.
  52. Lin, Y.C., Sause, R. and Ricles, J.M. (2013), "Seismic performance of steel self-centering, moment-resisting frame: hybrid simulations under design basis earthquake", J. Struct. Eng., 139(11), 1823-1832. https://doi.org/10.1061/(asce)st.1943-541x.0000745.
  53. Ling, S., Blomgren, H.E., Barbosa, A.R., Lindt, J.W., McDonnell, E., Berman, J. and Dolan, J.D. (2018), "Full-scale shake table testing of a two-story mass timber building with resilient rocking wall lateral systems", 16th European Conference on Earthquake Engineering, 1-10.
  54. Liu, F., Wang, L. and Lu, X. (2012), "Experimental investigations on the seismic performance of un-retrofitted and retrofitted RC frames", 15th World Conference of Earthquake Engineering, 1-7.
  55. Liu, L. and Wu, B. (2013), "Self-centering buckling-restrained braces", Adv. Mater. Res., 639-640(1), 846-849. https://doi.org/10.4028/www.scientific.net/AMR.639-640.846.
  56. Lopez, W. and Sabelli, R. (2004), "Seismic design of buckling-restrained braced frames", Steel TIPS, 33, 1251-1260. https://doi.org/10.1139/l06-068.
  57. Maheri, M.R. and Sahebi, A. (1997), "Use of steel bracing in reinforced concrete frames", Eng. Struct., 19(12), 1018-1024. https://doi.org/10.1016/S0141-0296(97)00041-2.
  58. Mahrenholtz, C., Lin, P.C., Wu, A.C., Tsai, K.C., Hwang, S.J., Lin, R.Y. and Bhayusukma, M.Y. (2014), "Retrofit of reinforced concrete frames with buckling-restrained braces", Earthq. Eng. Struct. Dyn., 44(1), 59-78. https://doi.org/10.1002/eqe.
  59. Maley, T.J., Sullivan, T.J. and Corte, G.D. (2010), "Development of a displacement-based design method for steel dual systems with buckling-restrained braces and moment-resisting frames", J. Earthq. Eng., 14, 106-140. https://doi.org/10.1080/13632461003651687.
  60. Mansour, Y.E.I. (2016), "Assessment of seismic retrofitting techniques of RC structures using fragility curves", Int. J. Struct. Civil Eng. Res., 5(3), 175-182. https://doi.org/10.18178/ijscer.5.3.175-182.
  61. Maraveas, C. and Tsavdaridis, K.D. (2019), "Assessment and retrofitting of an existing steel structure subjected to wind-induced failure analysis", J. Build. Eng., 23, 53-67. https://doi.org/10.1016/j.jobe.2019.01.005.
  62. Masri, A.C. and Goel, S.C. (1996), "Seismic design and testing of an RC slab-column frame strengthened by steel bracing", Earthq. Spectra, 12(4), 645-666. https://doi.org/10.1193/1.1585904.
  63. McCafferty, E. (2010), Introduction to Corrosion Science, Springer, Berlin.
  64. Miller, D.J., Fahnestock, L.A. and Eatherton, M.R. (2011), "Self-centering buckling-restrained braces for advanced seismic performance", Structures Congress 2011, 2297-2308.
  65. Miller, D.J., Fahnestock, L.A. and Eatherton, M.R. (2012), "Development and experimental validation of a nickel-titanium shape memory alloy self-centering buckling-restrained brace", Eng. Struct., 40, 288-298. https://doi.org/10.1016/j.engstruct.2012.02.037.
  66. Mochizuki, S., Murata, Y., Andou, N. and Takahashi, S. (1979), "Experimental study on buckling of unbonded braces under axial forces: Parts 1 and 2", Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, 1623-1626.
  67. Nagao, N. and Takahashi, S. (1990), "A study on the elasto-plastic behavior of unbonded composite bracing (Part 1: Experiments on isolated members under cyclic loading)", J. Struct. Eng., 415, 105-115.
  68. Nagao, T., Mikuriya, K., Matsumoto, Y. and Takahashi, S. (1988), "An experimental study on the elastoplastic behavior of unbonded composite bracing (Part 1-4)", Summaries of Technical Papers of Annual Meeting, 2,1326-1329.
  69. Nagao, T., Sera, S., Nakamura, S., Ouchi, H., Otani, K. and Fukutajima, K. (1992), "A study on the RC encased H-section steel brace (Part 1: General description, Part 2: Results and discussion)", Summaries of Technical Papers of Annual Meeting of the Architectural Institute of Japan, Structural Engineering Section II, Tokyo, Japan: AIJ, 2,1773-1776.
  70. Nagao, T. and Takahashi, S. (1991), "A study on the elasto-plastic behavior of unbonded composite bracing (Part 2: Analytical studies)", J. Struct. Constr. Eng., 422(4), 45-56.
  71. Nip, K.H., Gardner, L., Davies, C.M. and Elghazouli, A.Y. (2010), "Extremely low cycle fatigue tests on structural carbon steel and stainless steel", J. Constr. Steel Res., 66(1), 96-110. https://doi.org/10.1016/j.jcsr.2009.08.004.
  72. Nip, K.H., Gardner, L. and Elghazouli, A.Y. (2010), "Cyclic Testing and numerical modelling of carbon steel and stainless steel tubular bracing members", Eng. Struct., 32(2), 424-441. https://doi.org/10.1016/j.engstruct.2009.10.005.
  73. Perez, A. (2010), AD Classics: John Hancock Center/SOM, ArchDaily.
  74. Qingxuan, S., Yanchun, W. and Feng, W. (2020), "Analysis of seismic performance of the new self-centering buckling restrained brace", IOP Conf. Ser.: Earth Environ. Sci., 560(1), 012069. https://doi.org/10.1088/1755-1315/560/1/012069.
  75. Qiu, C.X. and Zhu, S. (2016), "High-mode effects on seismic performance of multi-story self-centering braced steel frames", J. Constr. Steel Res., 119, 133-143. https://doi.org/10.1016/j.jcsr.2015.12.008.
  76. Qu, Z., Xie, J.Z. and Wang, T. (2015), "Experimental tests of reinforced concrete frame subassemblies with buckling restrained braces in Double-K configuration", 6th International Conference on Advances in Experimental Structural Engineering.
  77. Qu, Z., Kishiki, S., Maida, Y., Sakata, H. and Wada, A. (2015), "Seismic responses of reinforced concrete frames with buckling restrained braces in zigzag configuration", Eng. Struct., 105, 12-21. https://doi.org/10.1016/j.engstruct.2015.09.038.
  78. Kumar, G.R., Kumar, S.R.S. and Kalyanaraman, V. (2007), "Behaviour of Frames with Non-Buckling Bracings under Earthquake Loading", J. Constr. Steel Res., 63(2), 254-262. https://doi.org/10.1016/j.jcsr.2006.04.012.
  79. Razak, S.M., Kong, T.C., Zainol, N.Z., Adnan, A. and Azimi, M. (2018), "A review of influence of various types of structural bracing to the structural performance of buildings", E3S Web Conf., 34, 1-9. https://doi.org/10.1051/e3sconf/20183401010.
  80. Reis, E. and Bonowitz, D. (2000), "State of the art report on past performance of steel moment-frame buildings in earthquakes", SAC Rep. No. FEMA 355e, Federal Emergency Management Agency, Washington, DC.
  81. Robinson, K. (2009), "Specifying buckling-restrained brace systems", Modern Steel Constr., 1-3. https://doi.org/10.1016/S1074-5521(00)00091-0.
  82. Sarno, L.D., Elnashai, A.S. and Nethercot, D.A. (2006), "Seismic retrofitting of framed structures with stainless steel", J. Constr. Steel Res., 62(1-2), 93-104. https://doi.org/10.1016/j.jcsr.2005.05.007.
  83. Sarno, L.D. and Manfredi, G. (2010), "Seismic retrofitting with buckling restrained braces: Application to an existing non-ductile RC framed building", Soil Dyn. Earthq. Eng., 30(11), 1279-1297. https://doi.org/10.1016/j.soildyn.2010.06.001.
  84. Song, D., Wan, H., Tu, X. and Li, W. (2020), "A better understanding of failure process of waterborne coating/metal interface evaluated by electrochemical impedance spectroscopy", Prog. Organ. Coating., 142, 105558. https://doi.org/10.1016/j.porgcoat.2020.105558.
  85. Speicher, M.S., DesRoches, R. and Leon, R.T. (2011), "Experimental results of a NiTi Shape Memory Alloy (SMA)-based recentering beam-column connection", Eng. Struct., 33(9), 2448-2457. https://doi.org/10.1016/j.engstruct.2011.04.018.
  86. Takeuchi, T. (2018), "Buckling-restrained brace : History, design and applications", 9th International Conference on Behavior of Steel Structures in Seismic Areas, Christchurch, Newzealand.
  87. Tremblay, R., Bolduc, P., Neville, R. and DeVall, R. (2006), "Seismic testing and performance of buckling-restrained bracing systems", Can. J. Civil Eng., 33(2), 183-198. https://doi.org/10.1139/l05-103.
  88. Tsai, K.C., Lai, J.W., Hwang, Y.C., Lin, S.L. and Weng, C.H. (2004), "Research and application of double-core buckling restrained braces in Taiwan", 13th World Conference on Earthquake Engineering, Vancouver, Canada.
  89. Usami, T. (2012), " Experimental evaluation on seismic performance of steel trusses with different buckling-restrained diagonal members", 15th World Conference on Earthquake Engineering (15WCEE), Curran Associates, Red Hook, NY.
  90. Usami, T., Wang, C.L. and Funayama, J. (2012), "Developing high-performance aluminum alloy buckling-restrained braces based on series of low-cycle fatigue tests", Earthq. Eng. Struct. Dyn., 41(4), 643-661. https://doi.org/10.1002/eqe.1149.
  91. Wakabayashi, M., Nakamura, T., Katagihara, A., Yogoyama, H. and Morisono, T. (1973), "Experimental study on the elastoplastic behavior of braces enclosed by precast concrete panels under horizontal cyclic loading-Parts 1 & 2", Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, 10, 1041-1044.
  92. Wang, C.L., Chen, Q., Zeng, B. and Meng, S. (2017), "A novel brace with partial buckling restraint: An experimental and numerical investigation", Eng. Struct., 150, 190-202. https://doi.org/10.1016/j.engstruct.2017.06.031.
  93. Wang, H., Wu, Y., Sun, X., Ling, J. and Zou, D. (2019), "Corrosion resistance to chloride of a novel stainless steel: The threshold chloride value and effect of surface state", Mater., 12(14), 2235. https://doi.org/10.3390/ma12142235.
  94. Wang, H., Nie, X. and Pan, P. (2017), "Development of a self-centering buckling restrained brace using cross-anchored pre-stressed steel strands", J. Constr. Steel Res., 138, 621-632. https://doi.org/10.1016/j.jcsr.2017.07.017.
  95. Xie, Q. (2005), "State of the art of buckling-restrained braces in Asia", J. Constr. Steel Res., 61(6), 727-748. https://doi.org/10.1016/j.jcsr.2004.11.005.
  96. Xie, Q., Zhou, Z., Huang, J.H. and Meng, S.P. (2016), "Influence of tube length tolerance on seismic responses of multi-storey buildings with dual-tube self-centering buckling-restrained braces", Eng. Struct., 116, 26-39. https://doi.org/10.1016/j.engstruct.2016.02.023.
  97. Xie, Q., Zhou, Z. and Meng, S.P. (2020), "Experimental investigation of the hysteretic performance of self-centering buckling-restrained braces with friction fuses", Eng. Struct., 203, 109865. https://doi.org/10.1016/j.engstruct.2019.109865.
  98. Yang, C.S.W., DesRoches, R. and Leon, R.T. (2010), "Design and analysis of braced frames with shape memory alloy and energy-absorbing hybrid devices", Eng. Struct., 32(2), 498-507. https://doi.org/10.1016/j.engstruct.2009.10.011.
  99. Yoshino, T. and Karino, Y. (1971), "Experimental study on shear wall with braces: Part 2", Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, 11, 403-404.
  100. Zhou, Z., Xie, Q., Lei, X.C., He, X.T. and Meng, S.P. (2015), "Experimental investigation of the hysteretic performance of dual-tube self-centering buckling-restrained braces with composite tendons", J. Compos. Constr., 19(6), 1-13. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000565.
  101. Zhou, Z., Xie, Q., Meng, S.P., Wang, W.Y. and He, X.T. (2016), "Hysteretic performance analysis of self-centering buckling restrained braces using a rheological model", J. Eng. Mech., 142(6), 1-14. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001080.
  102. Zhu, S. and Zhang, Y. (2008), "Seismic analysis of concentrically braced frame systems with self-centering friction damping braces", J. Struct. Eng., 134(1), 121-131. https://doi.org/10.1061/(asce)0733-9445(2008)134:1(121).