• 전자공학회논문지SC
• /
• 제46권3호
• /
• pp.8-14
• /
• 2009

본 논문은 성능 향상을 위하여 IMC 제어 구조를 갖는 PID 제어기 설계를 제안했다. 내부 모델은 최종값 정리와 유전자 알고리즘을 이용하여 2차의 지연시간을 갖는 모델로 동정 하였다. 그리고 제어기 파라미터 값은 성능지수 (IAE, ITAE)값이 최소가 되도록 내부 모델과 수치적 계산에 의해서 자동 동조된다. 시뮬레이션을 통하여 다양한 공정에 대하여 본 논문에서 새롭게 제안된 방법이 기존의 방법보다 우수함을 확인 할 수 있었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.88-89
• /
• 2000

The properties for self-frequency doubling (SFD) is unique phenomena for a small number of special single crystals. It is known that there are serious limitations to vary the concentration of active ions, for example high doping of active ions from 1 to 50 atomic %, in nonlinear materials. Until now, the Nd:YAl$_3$(BO$_3$)$_4$ (YAB) and Nd:(Ce,Gd)Sc$_3$(BO$_3$)$_4$ (CSB) crystals with high doping rates are well studied for the application of SFD purpose. They have much useful SFD properties, but also have big problems in crystal growth. In case of YAB crystal, it can be grown by solution melt method with very low growth rates and easy occurrence of inclusions. In case of CSB crystal, it has optically heterogeneity problems because of disarrangement of ions in huntite structure [1]. These problems make above crystals not so attractive for optical applications. Some popular nonlinear materials, such as LiNbO$_3$(LN), KTiOPO$_4$(KTP), LiB$_3$O$_{5}$ (LBO) crystals, are impossible to substitute by Rare Earth activators because of their crystallo-chemical problems of structure. When we dope active ions with the requisite concentrations for laser generation, it results in decreasing of optical quality of crystals or destroying of acentrosymmetric structure. (omitted)d)

• 대한건축학회논문집:구조계
• /
• 제35권7호
• /
• pp.147-156
• /
• 2019

The purpose of this study is to consider structural issues and analyze construction sequences when constructing hanging floors supported by Mega truss. Since suspended structures were supported by the Mega truss, vertical load on suspended structures was needed to transfer from low to high. Deflection management of structures was the primary point under construction. The results of this study were as follows; The steel structures, which has relatively lighter self-weight, were constructed upwards after the base floor steel truss erection. Concrete Placing, which has relatively heavier self-weight, were performed in two phases to minimize structure's deflection. Slab was placed downwards from the top floor to lower floor whereas column was places upwards. Deflection measurements were carried out at every construction sequences.

• 대한건축학회논문집:구조계
• /
• 제35권6호
• /
• pp.121-128
• /
• 2019

There is a big move to build zero-energy buildings in the form of passive houses that reduce energy waste worldwide. Korea has set a goal of reducing its greenhouse gas emissions by 37% by 2030 through the activation of green buildings, such as strengthening the energy levels of new buildings and improving the energy efficiency of existing buildings. The use of insulation with high insulation performance is one of the key technologies to realize this, and vacuum insulation is the next generation insulation that blocks the energy flow of the building. In this study, we measured the bonding structure of dry and wet processing glass fiber core materials and compared the insulation performance of vacuum insulation panel. In addition, the insulation performance of vacuum insulation panel was measured according to the thickness of the laminated core. It can be confirmed that the lamination structure of the core and the lamination thickness are important factors for the heat insulating performance of the vacuum insulating panel.

• Transactions on Electrical and Electronic Materials
• /
• 제4권6호
• /
• pp.17-20
• /
• 2003

This paper describes the effect of halogenic gettering during oxide passivation of commercial solar cell with the $N^{+}$-P-$N^{+}$ structure. In order to study the effect of halogenic gettering on $N^{+}$-P-$N^{+}$ structure mono-crystalline silicon solar cell, we performed conventional POCl$_3$ diffusion for emitter formation and oxide passivation in the presence of HCl vapors. The $N^{+}$-P-$N^{+}$ structure based silicon solar cells were found to have higher short circuit current and minority carrier lifetime. Their performance was also found to be superior than the conventional $N^{+}$-P-$N^{+}$ structure based mono-crystalline silicon solar cell. The cell parameters of the $n^{+}$-p-$p^{+}$ and $n^{+}$-p-$n^{+}$ structure based cells, passivated by HCl assisted oxidation were measured. The improvement in $I_{sc}$ was attributed to the effect of the increased diffusion length of minority carriers, which came from the halogenic gettering effect during the growth of passivating oxide. The presence of chlorine caused gettering of the cells by removing the heavy metals, if any. The other advantage of the presence of chlorine was the removal of the diffusion induced (in oxygen environment) stacking faults and line defects from the surfaces of the silicon wafers. All these effects caused the improvement of the minority carrier lifetime, which in-turn helped to improve the quality of the solar cells.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.65-68
• /
• 2003

Recently, there is a growing concern on the photovoltaic effects using organic materials. This is a phenomena which converts the solar energy into the electrical one. We have fabricated a device structure of ITO/PEDOT:PSS/CuPc/$C_{60}$/BCP/Al. The PEDOT:PSS layer is made by spin coating. and the other organic layers are made by thermal vapor deposition. By measuring the current-voltage characteristics with an illumination of light. we have obtained a value of $V_{oc}$=0.358V and $J_{sc}$=0.338mA/$cm^2$. A fill factor and efficiency are about 0.271 and 0.033%, respectively. A 500W xenon lamp(ORIEL) was used for a light source, and the light intensity illuminated into the device was about 10mW.

• 전자공학회논문지SC
• /
• 제37권2호
• /
• pp.69-76
• /
• 2000

dual-modulus 프리스케일러는 제어신호의 값에 따라 입력신호를 두 개의 모듈러스(modulus) 중에서 하나의 값으로 나누는 회로이다. 본 논문에서는 일반적인 ratioed-NAND구조가 아닌, ratioed-NOR구조를 가진 새로운 고속 dual-modulus 프리스케일러를 제안한다. 제안하는 회로는 NMOS를 직렬 연결하는 대신 병렬 연결함으로써 기존 회로보다 더 고속으로 작동한다. 현대 0.65(m 2-poly 2-metal CMOS 공정 파라미터를 사용한 HSPICE 모의 실험 결과, 25℃의 온도와 5V전원전압의 환경에서, 40.7㎽의 전력을 소모하고 최대 동작 주파수는 2.8㎓라는 것을 얻었다. 제안하는 dual-modulus 프리스케일러는 셀룰라 라디오의 입력단에서 주파수 합성을 하는 데에 이용될 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.773-777
• /
• 2016

A betavoltaic battery was prepared using radioactive $^{63}Ni$ attached to a three-dimensional single trenched P-N absorber. The optimum thickness of a $^{63}Ni$ layer was determined to be approximately $2{\mu}m$, considering the minimum self-shielding effect of beta particles. Electroplating of radioactive $^{63}Ni$ on a nickel (Ni) foil was carried out at a current density of $20mA/cm^2$. The difference of the short-circuit currents ($I_{sc}$) between the pre- and post-deposition of $^{63}Ni$ (16.65 MBq) on the P-N junction was 5.03 nA, as obtained from the I-V characteristics. An improved design with a sandwich structure was provided for enhancing performance.

• Nuclear Engineering and Technology
• /
• 제40권6호
• /
• pp.439-450
• /
• 2008

The KSTAR device succeeded in first plasma generation on $13^{th}$ June of 2008 through comprehensive system test and commissioning. Among various kinds of the key factors that decisively affected the project, success in the construction and assembly of the major tokamak structure was most important one. Every engineering aspects of each structure were finally confirmed in the integrated commissioning period, and there were no severe troubles and failures prevented the KSTAR device from operating during the commissioning and the first plasma experiments. As a result, all of the experiences and technologies achieved through the KSTAR construction process are expected to be important fundamentals for future construction projects of superconducting fusion devices. This paper summarizes key engineering features of the major structures and of the machine assembly.

• Current Photovoltaic Research
• /
• 제1권1호
• /
• pp.69-72
• /
• 2013

Combined nano- and micro-wires (CNMWs) Si arrays were prepared using PR patterning and silver-assisted electroless etching. A $POCl_3$ doping process was applied to the fabrication of CNMWs solar cells. KOH solution was used to remove bundles in CNMWs and the etching time was varied from 30 to 240 s. The lowest reflectance of 3.83% was obtained at KOH etching time of 30 s, but the highest carrier lifetime of $354{\mu}s$ was observed after the doping process at 60 s. At the same etching time, a $V_{oc}$ of 574 mV, $J_{sc}$ of $28.41mA/cm^2$, FF of 74.4%, and Eff. of 12.2% were achieved in the CNMWs solar cell. CNMWs solar cells have potential for higher efficiency by improving the post-process and surface-rear side structure.