• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.177-180
• /
• 1998

높은 Q가 요구되는 고주파 신호 처리용 필터 설계에서는 흔히 SC 필터를 사용하고 있다. 처리하고자 하는 신호가 고주파수이고, 선택도 Q 값이 매우 높은 경우에는, SC 필터에 사용하는 증폭기의 성능이 빠르고, 직류 성분 이득이 커야만 한다. 이와 같은 속도와 이득이 요구됨에 따라 일반적인 범용 증폭기는 이득이 충분치 못하여 사용이 제한되고, 설사 범용 증폭기를 이용하여 필터를 구성하였다 해도 그 특성에 많은 제한을 줄 수밖에 없다. 또한 GaAS MESFET op amp의 경우, 최근의 논문에서도 60[dB] 이상의 이득이 제안된 바 없으므로, 필터 구성시 또 다른 설계 기술이 요구된다. 따라서 본 논문에서는 GaAS MESFET 능동 SC 적분기의 유한한 이득과 offset 전압을 보정한 새로운 구조의 적분기를 제안한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.284-285
• /
• 1998

ISO TC108/SC2에서 취급하는 기계, 차량 및 구조물에 발생되는 기계진동과 충격의 측정 및 평가 기준에 대하여 살펴보았다. SC2내에는 현재 7개의 Working Group(WG)이 23개 기준에 대하여 보완 및 개정작업을 지속하고 있다. 이들 기준의 적용대상은 회전기계, 선박, 철도차량, 자동차 및 건물로서 본문에서는 기준 내용을 요약하고 개정과정도 일부 소개한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.67-76
• /
• 2014

In this study, the behavior of Steel Plate Concrete (SC) walls subjected to shear and axial forces to investigate the effects of shape and arrangement spacing of studs on the design of SC walls was analytically reviewed. For this purpose, 9 cases of finite element analyses considering the different shape and spacing of studs in SC wall were performed. The results showed that the steel plate was yielded at the lower load than the second yielding shear force of the design skeleton curve when the spacing of stud is excessively far from each other. It is also found that the shape of the stud did not affect the shear behavior of SC wall but, the spacing influenced to its composite action. In this study, it was also proven that the inclined shaped stud resists more effectively to the bucking load than the general shaped stud in SC wall.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.72-76
• /
• 1996

The magnetostrictive characteristics of three different forms of magnetostrictive transducers made of 2605SC and 2826MB metallic glasses were measured. In both cases, the two-end-point bonding configuration exhibited the best characteristics. With the two-end-point bonding we measured the effective magnetostrictive coefficient $C_{eff}$ of $1.2{\times}^{-5}Oe^{-2}$, the saturation magnetostriction ${\lambda}_s$ of $7.4{\times}10^{-4}$ and the minimum detectable magnetic field $H_{min}$ of $1.6{\times}10^{-7}Oe$/ √Hz for the 2605SC metallic glass ribbon. Also for the 2826MB metallic glass ribbon, Ceff and ${\lambda}_s$ were $7.6{\times}10^{-6}Oe^{-2}$ and $3.4{\times}10^{-4}$ respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.119-126
• /
• 2022

This study proposed a BCM(Binding Column Method) that can reinforce the insufficient seismic force of piloti buildings that are not designed for seismic resistance. In addition, 4 reinforcement specimens and 1 reference specimen were manufactured for the proposed seismic reinforcement method. The effect of improving seismic performance before and after reinforcement was examined through repeated loading tests. As a result of experiment, seismic reinforcement specimen with BCM system showed hysteretic characteristics of a large ellipse with great energy dissipation ability and increased strength and stiffness, while reference specimen showed rapid reduction in strength and brittle shear failure column. In addition, it can be seen that the reinforcing effect is improved as the gap is narrow, the torque is large, and the thickness of the L-shaped steel sheet is thicker. The SC4 specimen showed the best seismic performance reinforcement effect.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.3
• /
• pp.99-103
• /
• 2005

Lead scandium tantalate powders were prepared by a molten salt synthesis method using NaCl-KCl as a flux. Variations in phase formation and particle morphology were investigated for the temperature range from $700^{\circ}C\;to\;800^{\circ}C$. $Pb(Sc_{1/2}Ta_{1/2})O_3$, with pure perovskite phase was formed at $750^{\circ}C$ fur 2 hrs and the prepared powder had the cubic-like morphology and the average particle size below $0.5{\mu}m$. The results were discussed with respect to DTA, X-ray diffraction, and microstructural characterization data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.35-42
• /
• 2015

This study analytically reviewed the behavior of Steel Plate Concrete(SC) walls subjected to cyclic loads to investigate the effects of shape and arrangement spacing of studs on the behavior of SC walls. To perform it, 9 cases of finite element analyses considering the different shape and spacing of studs in SC wall were carried out. As the results, the skeleton curves were obtained from the load-displacement history curves and the ultimate and yielding forces were increased as the spacing of studs decrease. In addition, the strength of inclined studs are shown to be bigger compared to that of general studs. The damping ratios are increased as the decrease of strength ratio. Finally, as the decrease of stud spacings, the cumulative dissipated energy was increased and the seismic performance was improved.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.236-242
• /
• 2010

The porcelain fused metal was made through the progressive fused process of porcelain on substructure of metal material. The substructure was made using novel SLM method. The objective of this study was to observe the color change of porcelain using spectrophotometer equipment according to porcelain fused step and production methods after conducting the process of casting and SLM method of the substructure. The color change by step was indicated that fused opaque porcelain groups(CN1, CC1, CT1, SC1, ST1) had color difference(${\Delta}E$=30) by comparison with fused body porcelain groups(CN2, CC2, CT2, SC2, ST2) and fused glazing porcelain groups(CN3, CC3, CT3, SC3, ST3) (p<0.05). and there was no color difference between the substrates(CN, CC, CT) made by the casting method and the substrates(SC, ST) made by the SLM method. so, the color change was expressed by fused change of porcelain, and this study showed that the color of porcelain fused metal made by the SLM method can be applied clinical trials.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.285-288
• /
• 2002

In this paper, standardization activities and trends of ISO TC 108/SC 2 (measurement and evaluation of mechanical vibration and shock as applied machines, vehicles and structures) are reviewed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.333.2-333
• /
• 2002

In this paper, standardization activities and trends of ISO TC 108/SC 2(Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures) are reviewed.