• 상하수도학회지
• /
• 제26권6호
• /
• pp.797-805
• /
• 2012

Contribution of immobilized media with bacteria to the odor removal was evaluated in a lab scale bio-filter compared to that with sponge or ceramic media without the immobilized bacteria. Candida tropicalis for volatile organic compounds and ammonium oxidizing bacteria (AOB) for inorganic compounds were used as seeds in lab-scale bio-reactors. Three different type of media in the bio-reactors that immobilized bioreactor (IBR), sponge bioreactor (SBR), and ceramic bioreactor (CBR) were examined, respectively. An empty bed contact time (EBCT) of the bio-filters was fixed as 60 seconds, and the inlet concentration of toluene was changed from 20 ppm to 200 ppm to observe the removal efficiency depending on the concentrations. As a result, the maximum elimination capacities of IBR, SBR, and CBR were 166 $g/m^3/hr$, 138 $g/m^3/hr$, and 138 $g/m^3/hr$, respectively. In addition, toluene as an organic compound and ammonia as an inorganic compound were applied together with different inlet concentrations varied from 80 ppm to 250 ppm of toluene and from 2.5 ppm to 40 ppm of ammonia. The toluene maximum elimination capacities in IBR, SBR, and CBR were 97.4 $g/m^3/hr$, 59.5 $g/m^3/hr$, and 81.9 $g/m^3/hr$, respectively. The ammonia maximum elimination capacities were reached as 7.2 $g/m^3/hr$ in IBR, 6.6 $g/m^3/hr$ in SBR, and 7.0 $g/m^3/hr$ in CBR.

• Elastomers and Composites
• /
• 제53권2호
• /
• pp.39-47
• /
• 2018

Styrene-butadiene rubber (SBR) is widely used in tire treads due to its excellent abrasion resistance, braking performance, and reasonable cost. Depending on the polymerization method, SBR is classified into solution-polymerized SBR (SSBR) and emulsion-polymerized SBR (ESBR). ESBR is less expensive and environmentally friendlier than SSBR because it uses water as a solvent. A higher molecular weight is also easier to obtain in ESBR, which has advantages in mechanical properties and tire performance. In ESBR polymerization, a surfactant is added to create an emulsion system with a hydrophobic monomer in the water phase. However, some amount of surfactant remains in the ESBR during coagulation, making the polymer chains in micelles clump together. As a result, it is well-known that residual surfactant adversely affects the physical properties of silica-filled ESBR compounds. However, researches about the effect of residual surfactant on the physical properties of ESBR are lacking. Therefore, in this study we compared the effects of remaining surfactant in ESBR on the mechanical properties of silica-filled and carbon black-filled compounds. The crosslinking density and filler-rubber interaction are also analyzed by using the Flory-Rehner theory and Kraus equation. In addition, the effects of surfactant on the mechanical properties and crosslinking density are compared with the effects of TDAE oil (a conventional processing aid).

• 접착 및 계면
• /
• 제1권1호
• /
• pp.30-37
• /
• 2000

고무-섬유로 이루어진 고무복합체 제조공정을 단순화하기 위한 직접블렌딩 기술을 본 연구에서 제시하였다. 직접블렌딩 방법은 레소시놀, 헥사메틸테트라민, NaOH로 이루어진 결합체를 고무혼합물 배합공정에 직접 혼합하여 보강섬율의 접착제 처리공정을 생략할 수 있는 방법이다. 이러한 직접블렌딩 메커니즘을 규명하기 위해 결합체를 직접 고무혼합물에 블렌딩한 경우와(Case I) 결합체를 수용액 상에서 반응시켜 경화물을 얻은 후 이를 분쇄하여 고무혼합물에 배합하는 경우를(Case II) 비교하였다. 모폴로지 분석결과에 의하면 Case II의 경우 결합체와 매트릭스 고무 사이에 뚜렷한 계면이 발생하였지만, Case I의 경우 적절한 가공조건 아래서 결합제와 매트릭스 고무 사이의 반응에 의해 새로운 상이 생성됨을 알 수 있었다. 또한, SBR-나일론 고무복합체의 최적 성능을 위한 결합제의 최적 조성은 레소시놀과 헥사메틸렌테트라민의 mole비가 1.2:1인, 즉 레소시놀과 포름알데히드의 mole비가 1:5인 조성이었다.

• Elastomers and Composites
• /
• 제58권4호
• /
• pp.179-190
• /
• 2023

The effect of the particle size and silica structure on the wear behavior of Silica/Styrene-Butadiene Rubber (SBR) compounds was investigated using a blade-type abrader and the findings were compared with those obtained with an Akron abrader. The compensated characteristic parameter (Ψ_c), which was the contributory factor of the combined effect of the particle size and filler structure, was introduced. This parameter was found to exhibit a linear relationship with the Young's modulus. The Young's modulus correlated more with Ψ_c than the uncompensated characteristic parameter (Ψ) modeled for carbon black. The wear rate and volume loss measured using a blade-type abrader and Akron abrader were respectively observed to be inversely proportional to Ψ_c, that is, the wear resistance of Silica/SBR compound improved as the particle size became smaller and the silica structure became intricate. The coefficient of determination (R²) obtained from the linear relationship between Ψ_c and wear rate was higher than those between Ψ_c and volume loss for the Silica/SBR compound. Thus, the blade-type abrader exhibited high potential to be used for accurately evaluating the effect of particle size and structural properties of silica on the wear behavior of SBR compounds.

• Elastomers and Composites
• /
• 제17권4호
• /
• pp.215-225
• /
• 1982

The purpose of this study is to get comparitive results on the combined accelerator systems comprised of MBT, MBTS, DPG and CBS with TMTD, TMTM and Zn-MDC to SBR compound. Vulcanization characterstics and physical properties of the combined accelerators have been studied by means of the Mooney viscometer, the Monsanto disc rheometer, tensile testing machine, aging chamber and so on. According to the test results, DPG, MBT and Zn-MDC system have show faster Mooney scorch time and optimum cure time than other systems. The Vulcanizate comprise of DPG, MBT and TMTD accelerator system has taken adventage of tensile strength, elongation, 100% modulus, resilience, compresion set.

• Elastomers and Composites
• /
• 제17권2호
• /
• pp.77-90
• /
• 1982

The purpose of this study is to get comparative results on the combined antioxidant systems comprised of MHPPD with IPPD, MHPPD with PBN and MHIPPD with MB when they are individually added to NR and SBR compound. Vulcanization characterstics and physical properties of the combined antioxidants have been studied by means of the Mooney viscometer, the Monsanto disc rheometer and so on. According to the test results, MHPPD with IPPD system has shown faster cure rate, better optimum cure time and shorter scorch time than other systems. The vulcanizate comprised of the MHPPD with IPPD antioxidant system has taken advantage of heat resistance, fluid resistance and antiozone resistance.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.409-420
• /
• 2007

ASM No. 1 is a very useful model to analyze wastewater treatment system removing organic carbon and nitrogen material. But it isn't adequate to control the wastewater treatment system with real time since it has many material divisions and parameters. So, the purpose of this study is the simplification of ASM No. 1 to control the wastewater treatment system. ASM No. 1 was changed with the model which has 3 material divisions(COD, $NH_4{^+}$, $NO_3{^-}$) and two phases(Aerobic and Anoxic condition). SBR was running with two phases(Phase I and II). Phase II running 20 minutes with aerobic time was used for deciding model parameters and Phase I running 12 minutes with aerobic time was used for proving the simplified model. The simplified model was compared with ASM No. 1 using data of Phase I and II. As a result of model comparison, the simplified model has enough ability to express the variation of $NH_4{^+}$ compound.

• Elastomers and Composites
• /
• 제36권1호
• /
• pp.37-43
• /
• 2001

실리카와 카본블랙으로 보강된 SBR 배합물의 가황 특성과 bound rubber 함량 그리고 가황물의 물성에 보강제의 조성비가 미치는 영향을 연구하였다. 고무 배합물의 보강제 총 함량은 80.0 phr 이다. Bound rubber 함량은 실리카 함랑비가 증가할수록 증가하였고 점도 역시 증가하였는데, 특히 실리카 함량이 60.0 phr 이상일 때는 점도의 증가폭이 두드러지게 높아졌다. 가황시간은 실리카 함량이 증가할수록 느려졌고 가황 속도도 느려졌다. 실리카 함량비가 증가할수록 델타 토크가 증가함에도 불구하고 모둘러스는 감소하는 경향을 보였다. $60^{\circ}C$에서의 tan ${\delta}$ 값은 실리카 함량이 증가할수록 감소하였다.

• Elastomers and Composites
• /
• 제42권2호
• /
• pp.75-85
• /
• 2007

본 연구에서는 폴리에스터 코드와 고무 매트릭스간의 접착을 향상시키기 위한 접착시스템에 관해 조사하였다. 폴리에스터 코드의 표면 활성화를 통해 접착력을 증진시키기 위해 0.03, 0.05, 0.1, 0.2, 0.5, 1 및 5 wt.％ NaOH 용액으로 폴리에스터 코드를 개질하였다. 개질된 폴리에스터 코드와 결합제가 직접블렌딩된 SBR 고무혼합물과의 접착력을 평가한 결과 0.05 wt.％의 NaOH 농도에서 10분 개질 할 때 최대의 접착강도를 나타내었다. 1 wt.％ 이상의 NaOH 농도에서는 과도한 개질로 인한 폴리에스터 코드의 손상으로 인하여 접착력 실험 동안 코드의 파괴가 발생하였다. 또한, 개질한 폴리에스터 코드에 triallylcyanurate(TC) 접착제를 코팅한 후 상온에서 건조하여 접착시키는 경우 보다 $220^{\circ}C$의 고온에서 건조한 후 고무 매트릭스와 접착시킬 경우 가장 우수한 접착력을 나타내었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.293-298
• /
• 2005

선박에서 발생하는 오 ${\cdot}$ 폐수를 처리하기 위하여 생물학적 질소 및 인의 제거공정으로 사용되고 있는 연속 회분식 공정을 이용하여 유기물의 제거 특성과 산소 소모량, 반응조내에서 우점하고 있는 Bacillus sp.균주의 상태를 알아보기 위하여 실험실 규모로 수행하였다. 반응조에서 COD의 제거효율은 98.5%, 암모니아성질소는 90%, 총질소의 제거효율은 95%, 인의 제거효율은 93%로 나타났다. Bacillus sp.를 이용한 SBR를 사용하여 선박폐수에 대하여 안정적인 처리효율을 나타내었다. 선박 오 ${\cdot}$ 폐수 처리 SBR에서 유기물의 제거와 내생호흡에 필요한 산소량 그리고 질소의 제거에 필요한 총 산소량은 0.2$m^{3}$ Air/min이다. 포기시에 SBR 내의 pH는 초기의 8.1에서 30분동안에 pH는 7.0으로 감소하였다. 무산소 단계인 3단계와 4단계에서는 pH는 증가하기 시작하여 최종적으로 pH는 7.3으로 유지되었다. TOC제거량에 대한 슬러지 부하율은 약 0.36kg ${\cdot}$ MLSS/kg ${\cdot}$ TOC으로 나타났으며 낮은 슬러지 발생율과 높은 슬러지 침강성을 나타내었다. 반응조에서 바실러스균의 평균 우점율은 24.2%로 나타났고 각 반응단계에서 안정적인 처리효율을 얻을 수 있어 충분히 우점화 되었다고 판단할 수 있었다.