• Smart Structures and Systems
• /
• v.4 no.5
• /
• pp.685-696
• /
• 2008

This paper deals with the numerical model of a bracing-friction damper system and its deployment using the optimal slip load distribution for the seismic retrofitting of a damaged building. The Slotted Bolted Connection (SBC) type friction damper system was tested to investigate its energy dissipation characteristic. Test results coincided with the numerical ones using the conventional model of a bracing-friction damper system. The placement of this device was numerically explored to apply it to the assumed damaged-building and to evaluate its efficiency. It was found by distributing the slip load that minimizes the given performance indicies based on structural response. Numerical results for the damaged building retrofitted with this slip load distribution showed that the seismic design of the bracing-friction damper system under consideration is effective for the structural response reduction.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.3
• /
• pp.40-47
• /
• 2018

Reducing aircraft speed is the important task in the Rejected Takeoff and/or landing process. It is known that the effect of the Speedbrake is most important factor during the rejected takeoff maneuver in particular near V1 on the critical field length runway. The B747 designer created Automatic Speedbrake Control System to relieve pilot workload, improves brake operation and ensures proper Speedbrake operation for rejected take off. However, those who make the Rejected Takeoff procedure ignored the Automatic function and made it does all manual operations. This lets procedures difficult, complicated, and a cause of confusion and pilot error. This study was conducted to commentary the mechanism and function of the Automatic Speedbrake Control System of B747-8 and to propose appropriate B747-8 Rejected Take off procedures for its function to reduce the workload of pilots and contribute to reduce the possibility of pilot error during Rejected Takeoff.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.156-157
• /
• 2018

의료분야에서 원격판독은 보편화되어 있다. 하지만 이러한 원격판독에 필요한 전송과 관리 시스템은 부족하다. 본 논문에서는 가정용 카메라 모듈을 구성하고 이를 통해 모바일 애플리케이션으로 영상 스트리밍 및 사진 촬영을 하여 촬영된 사진을 치과로 전송하고 원격으로 검진할 수 있는 카메라 모듈 및 애플리케이션의 영상 전송을 위한 방법론을 제시한다. 안드로이드 애플리케이션과 카메라 모듈의 스트리밍 과정에는 여러 가지 문제가 발생한다. 모듈에서의 촬영 영상과 애플리케이션의 스트리밍 영상 간의 딜레이가 존재하는 것과 스트리밍 도중에 영상이 검은 화면으로 나왔다가 다시 돌아오거나 화절 저하 현상이 일어나는 것이다. 이러한 문제점들을 개선하고 최적화 할 수 있도록 한다.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.391-393
• /
• 2007

The rotor speed and flux information is most important in the vector control. The accuracy of flux observers for induction machine inherently depends on parameter sensitivity. The control strategy is using online flux observer for flux estimation. In the proposed system, the speed control characteristics using a online flux observer control isn't affected by a load torque parameter disturbance. Simulation results are presented to prove the effectiveness of the adaptive sliding mode controller for the drive variable load of induction motor.

• Annual Conference of KIPS
• /
• 2009.11a
• /
• pp.35-36
• /
• 2009

터치스크린 구동을 위해서는 터치된 위치의 아날로그 신호를 디지털 값으로 변환해 주는 ADC의 모드와 인터럽트 요청 발생을 위한 ADC의 채널에 연결된 스위치의 활성화 여부를 설정해야 한다. 본 논문은 터치스크린 LCD 모듈인 LP35가 부착된 LN2440SBC 임베디드 보드의 터치스크린 구동을 위한 초기화 방법과 터치스크린의 위치 좌표를 LCD의 픽셀 좌표로 변환해주는 좌표 보정 방법을 설명한다. 터치스크린의 구동은 크게 인터럽트 요청 대기/처리 상태로 구분된다. ADC 모드와 채널 스위치의 활성화 여부를, 인터럽트 요청 대기 상태에서는 인터럽트의 요청을 대기하며, 인터럽트 발생시 터치된 위치에 대한 아날로그 신호를 자동으로 디지털 값으로 변환하도록 설정하고, 인터럽트 요청 처리 상태에서는 인터럽트 요청을 처리하는 동안 새로운 인터럽트 요청을 마스킹(masking)하도록 설정한다. 좌표 보정은 터치된 위치 좌표 2개와 이에 대응되는 2개의 픽셀 좌표를 구하고, 이 좌표 값들을 이용하여 좌표 보정 일차 함수를 구함으로써 구현한다.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.478-481
• /
• 2005

The PMU (Payload Management Unit) is the main subsystem for the management, control and power supply of the MSC (Multi-Spectral Camera) Payload operation. It is the most important function for the electro-optical camera system that performs the Non-Uniformity Correction (NUC) function of the raw imagery data, rearranges the data from the CCD (Charge Coupled Device) detector and output it to the Data Compression and Storage Unit (DCSU). The NUC board in PMU performs it. In this paper, the NUC board system is described in terms of the configuration and the function, the efficiency for non-uniformity correction, and the influence of the data compression upon the peculiar feature of the CCD pixel. The NUC board is an image-processing unit within the PMU that receives video data from the CEV (Camera Electronic Unit) boards via a hotlinkand performs non-uniformity corrections upon the pixels according to commands received from the SBC (Single Board Computer) in the PMU. The lossy compression in DCSU needs the NUC in on-orbit condition.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1008-1009
• /
• 2006

There is an application which uses smoothing reacter connecting each of the phases in order to make the system smaller comparison with an application using the insulating transformer in the utility interactive photovoltaic generation system using the PWM converter. In this case, there might be the occurence of the unbalance of output voltage, by the difference of smoothing reactor, connected on each of the lines. Therefore this study proposes that the method which maintains the balance and compensates the unblance which occured by the different volume of the smoothing reactor connected on each of the lines.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1004-1005
• /
• 2006

This paper investigates a speed sensorless control of induction motor. The control strategy is based on MRAS (Model Reference Adaptive System) using load-torque observer as a reference model for flux estimation. The speed response of conventional MRAS controller characteristics is affected by variations of load torque disturbance. In the proposed system, the speed control characteristics using a load-torque observer control isn't affected by a load torque disturbance. Simulation results are presented to prove the effectiveness of the adaptive sliding mode controller for the drive variable load of induction motor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.489-497
• /
• 2010

This paper presents the design of hardware platform, which is a test bed for the navigation system and hovering type AUV (Autonomous Underwater Vehicle) under the OCP (Open Control Platform). The developed AUV test bed consists of two hulls, four thrusters, and the navigation system which uses a SBC2440II with IMU (Inertial Measurement Unit). And the SMC (Sliding Mode Control) is chosen for the diving and steering control of the AUV. This paper uses ACE/TAO RTEC (Real-Time Event Channel) as a middleware platform in order to control and communicate in the developed AUV test bed. In this paper, two computers are used and each of them is dedicated for the specific purpose, the first computer is used as the SMC module and the middleware platform for the ACE/TAO RTEC and the second computer is used for the sensor controller. We analyze the performance of the AUV test bed under the OCP.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.79-86
• /
• 2010

Causing by economic stagnation and financial management difficulty of the domestic small and medium business company, the actual condition which enlarges the plan of politic funds increased from the government. The government authority as the SBC (small and medium business promotion corporation) evaluates the domestic small and medium business company, and directly executes a governmental politic funds. Financial analysis is a important factor of enterprise evaluation among various valuation bases. However because of applying to the whole domestic manufacturing industry on financial evaluation, Current financial evaluation index effectively cannot reflect the feature of a regional industry. A whole manufacturing industry index considers a standard for the comparison evaluation of domestic manufacturing industry and compares with the other industries and the world-wide nation industry change, But, there is a difference from indexes of corresponding industry in specific regions. This paper proposes a model of evaluation index for the efficient execution of politic funds. We considers three manufacturing industries for proposed model which are shipbuilding, machine tool and airline industries in Gyeongsangnam-do region.