• 센서학회지
• /
• 제16권1호
• /
• pp.39-43
• /
• 2007

This paper presents characteristics of surface acoustic wave (SAW) gas sensor for detecting volatile gases such as acetone, methanol, and ethanol by measuring phase shift of output signal. A delay-line by combining with a center frequency of 200 MHz was fabricated on S-T Quartz substrates. Using gas chromatography column, the selectivity of the SAW gas sensor were introduced. Experimental results, which show the phase change of output signal under the absorption of volatile gas on sensor surface, were presented. This SAW gas sensor system may be well suited for a high performance electronic nose system.

• 센서학회지
• /
• 제16권5호
• /
• pp.349-354
• /
• 2007

This paper presents characteristics of surface acoustic wave (SAW) gas sensor for detecting volatile gases such as ethanol gas by measuring the phase shift of output signal. A delay-line with a center frequency of 400 MHz was fabricated on $128^{\circ}$ Y-Z $LiNbO_{3}$ substrates. Experimental results, which showed the phase change of the output signal under the absorption of volatile gas on sensor surface, were presented. The sensitivities of SAW delay lines coated with polyurethane films were greatly increased compared to those for uncoated devices. This SAW gas sensor system may be well suited for a high sensitivity electronic nose system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.144-146
• /
• 1992

Surface acoustic wave(SAW) oscillator offers many attractive features for application to vapor sensors. The perturbation of SAW velocity by the hexafluoropropence plasma polymer thin film has been studied for relative humidity sensing. adsorption of moisture produces rapid aid changes in the properties of the film, resulting in a change in the velocity of surface acoustic waves and, hence, in the frequency of one SAW oscillator. The device used in our experiments have 55 MHZ SAW oscillator fabricated on a LiNbO substrate.

• 한국전자파학회논문지
• /
• 제27권3호
• /
• pp.299-306
• /
• 2016

본 논문에서는 공진기와 인체와의 거리에 따른 근접 전자기장 변화에 의한 공진기 임피던스의 변화를 토대로 사람의 호흡 및 심박신호를 검출할 수 있는 센서를 제안한다. 제안된 생체신호 측정센서는 패치형 공진기가 결합된 발진기, 발진주파수의 2채배 주파수만 통과시키기 위한 다이플렉서, 증폭기, SAW 필터 및 RF 검출기로 구성되어 있다. 호흡과 심박신호와 같은 인체의 주기적인 움직임은 근접 전자기장 영역 안에서 공진기의 임피던스 변화를 야기하며, 발진기의 주파수를 변화시킨다. 감도를 향상시키기 위해 발진주파수의 2채배 주파수 천이를 SAW 필터의 저지대역에 위치시킴으로써, 제안된 센서의 검출 거리를 2배로 확장시킬 수 있다. 제안된 센서의 측정결과, 최대 40 mm까지 호흡 및 심박신호가 안정적으로 측정되는 것을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.368-371
• /
• 2008

Cellulose based Electroactive Paper (EAPap) has been developed as a new smart material due to its advantages of piezoelectricity, large displacement, low power consumption, low cost and flexibility. EAPap can be used fur a surface acoustic wave (SAW) device using the piezoelectric property of EAPap, resulting in the cost effective and flexible SAW device. In this paper, inter digit transducer (IDT) structure using lift-off technique with a finger gap of $10{\mu}m$ was used for micro fabrication of the cellulose EAPap SAW devices. The performance of IDT patterned SAW device was characterized by a Network Analyzer. The feasibility of cellulose EAPap as a potential acoustic device was presented and explained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.563-567
• /
• 2004

In this paper, a remote temperature sensor based on surface acoustic wave is introduced and the issues on design, manufacturing, and test of the sensor are addressed. SAW sensors having single and double electrode are prepared on the 128$^{\circ}$ YX-LiNbO$_3$ Substrate. The frequency responses of SAW sensors on the temperature change are compared. To measure the change of center frequency, two center frequencies on the 3dB and 20dB are measured and compared. Since the center frequency on the temperature change from -30$^{\circ}C$ to 80$^{\circ}C$ is linearly changed, the SAW sensor is applicable to the temperature sensor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.469-470
• /
• 2006

Surface Acoustic Wave(SAW) devices can be used to as wireless sensor elements, called SAW transponders, for measuring shysical quantities such as temperature that do not need any power supply and may be accessed wirelessly. SAW devices were fabricated on Y-Z $LiNbO_3$ piezoelectric substrate with a good temperature coefficient property. The signal response of SAW sensor on the temperature change were compared. To measure the change of SAW velocity. Temperature changed form $20^{\circ}C$ to $400^{\circ}C$ was linearly changed, the SAW sensor is application to the temperature sensor.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.884-887
• /
• 2012

무선 센서 네트워크 기술은 상시적으로 물리정보를 획득할 수 있기 때문에 광범위한 응용분야에서 수요가 증가하고 있다. 또한 무선 센서 네트워크에 적용되는 무선 센서 시스템은 일반적으로 배터리를 장착하여 회로에 전력을 공급해주는 방식을 사용한다. 그러나 센서가 적의 기지근처, 인체 조직내 삽입, 건물의 내벽 등과 같이 배터리를 교체할 수 없는 곳에 위치해 있는 경우, 반영구적인 사용에 제한이 있기 때문에 무전원 무선 센서의 개발이 절실히 필요하다. 특히, 이러한 센서를 새롭게 개발하고 검증하려며 센서의 주파수 특성을 분석해야 하는데 기존에는 단순한 파형만을 분석할 수 있는 일반적인 계측기를 사용할 수밖에 없었다. 따라서 본 논문에서는 기존의 계측기보다 유연성 있고 효율적으로 무전원 무선 센서의 개발과 검증이 가능하도록 신호의 모니터링과 신호발생기를 에뮬레이션하는 NI LabVIEW기반의 SAW System Analyzer와 SAW Reader Emulator 시스템을 설계하고 개발하였다.

• 센서학회지
• /
• 제21권6호
• /
• pp.408-412
• /
• 2012

An in-line dispersive delay line (DDL) demands low and controllable reflectivity of the reflectors, especially if the surface acoustic wave (SAW) propagates all the way along the reflecting structure. The metal reflectors are usually too strong and introduce too much attenuation in such a device. The proposed solution of this problem is to spatially separate the acoustic channels for different frequencies with the help of Fan-shaped Transducers (FIDT) and to use narrow open metal reflectors to reduce reflectivity. Special arrangement of FIDT is performed to use 180-deg. reflection of the SAW. Narrow open metal strips with a metallisation ratio of the order of 20% are used as reflectors with small and controllable reflectivity. Reflectivity of such strips is estimated both theoretically and experimentally. Experimental performance of the proposed DDL is presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.461-462
• /
• 2013

In this paper, a studied the SAW system being developed shipbuilding and plant industry with changing welding method to progress productivity. It studies a SAW system using one sensor instead previous one which is using two sensors. It suggests SAW system which has AC output with high current makes high speed welding and DC output with accurate arcing makes detailed control.