• The Mathematical Education
• /
• v.48 no.3
• /
• pp.287-302
• /
• 2009

This study investigated how 5th grade students found and understood triangle congruence conditions (SSS, SAS, ASA). In particular, this study focused on children's processes of discovering triangle congruence conditions and the obstacles which they encountered in the process of making sense of these conditions. Our data indicates that inquiring the cases in which less than three factors of triangle are given is helpful for children to guess triangle congruence conditions and understand the minimal characteristic of these conditions. And the degree of difficulty of discovering each congruence condition is different. Children discovered SAS condition and ASA condition easily, but it was hard for them to discover and understand that SSS was also a triangle congruence condition because they connected the length of a given side with the use of a scaled ruler not a compass.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.608-611
• /
• 2003

A large part of the embedded system, compared with the PC, have low performance CPU and small memory. So the embedded operating system fits the condition of that hardware system. A Single Address Space (SAS) OS has the operating system and all applications in the single address space. The SAS architecture enhances sharing and co-operation, because addresses have a unique interpretation. Thus, pointer-based date structures can be directly communicated and shared between programs at any time, and can be stored directly on storage. The key point of the SAS OS on the embedded system is the low overhead inter-action between programs in process and usage. So SAS OS can be ported on the low performance CPU. In this paper, we design the SAS OS (named emNOS, Embedded Network Operating System) on the ARMTTDMI processor. Finally we show the benefits of the SAS OS on the embedded system.

• 한국항공운항학회:학술대회논문집
• /
• 2004.11a
• /
• pp.279-284
• /
• 2004

• Proceedings of the Korea Contents Association Conference
• /
• 2017.05a
• /
• pp.103-104
• /
• 2017

Objectives: The manufacturing industry was the one with the most repeated occurrence industrial disasters, and it is important to study the safety environment known by workers in the industry in order to prevent industrial accidents. Methods: Research objects were 1,123 male among members of employees who responded to 2015 PSWCI panel report. Research objects underwent affected subjective health and then categorized subjects into some groups according to changes in employment condition during one year. Statistical analyses were performed using the SAS version 9.4 (SAS Institute Inc., Cary, NC, USA). Results: According to results of analysis, manufacturing industry had differences in economic activity and health conditions based on employees conditions. Dynamic change aspects of manufacturing industry condition had differences between sex and cases where going back and forth between temporary condition and unemployment status had higher percentage in male. Conclusions: The results of this study may serve as the refer to taking a bill to improve the level of safety of the work environment felt by employees in the manufacturing industry.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.802-805
• /
• 2003

Structural surface becomes an antenna. The integration of antennas into structural body panels is a new high payoff technology. It emerged from the need to improve structural efficiency and antenna performance. In this paper, we developed new design concept for the structural surface which transmits and receives the electromagnetic signals, and it is termed Surface-Antenna-Structure (SAS). Design procedure was presented including structure design. material selection and design of antenna elements, which was processed according to the communication with KORSAT satellite at Ku-Band (12.25-12.75 GHz). The final demonstration article was 350$\times$200$\times$7.5mm flat antenna panel. Experimental results for antenna performances were in good agreements with design requirements. Also structural analysis was performed with SAS. estimating stress distributions under simply supported condition with Laminated Plate Theories and Wavier Solutions. The SAS concept can be extended to give a useful guide to manufacturers of structural body panels as well as antenna designers. promising innovative future communication technology.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.4
• /
• pp.329-338
• /
• 2022

This paper provides a case study of development testing and evaluation of design goal of Interferometric SAS (Synthetic Aperture Sonar) system that is developing supported by Civil-Military Technology Cooperation Center in offshore fields. For Deep water operating capabilities evaluation, We have surveyed candidate field, bathymetric mapping and target identification over 200 m depth, East Sea. In testing phase, We have provided environmental information of testing field include water column, seabed and weather condition in real time. And to compare excellency of developing InSAS, we have gather commercial imaging sonar system data with same target. This case study will support the Test Readiness Review of future underwater surveillance system developing via investigate marine testing field environment, testing facilities and planning.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.225-229
• /
• 2017

Micron-sized dextran particles, which now attract wide attention as a promising drug delivery systems, can be prepared via the supercritical anti-solvent (SAS) process. In SAS process, dextran particles are obtained as a result of recrystallization of dissolved dextran in dimethyl sulfoxide (DMSO) on addition of supercritical $CO_2$ as an anti-solvent. In this work, with an intention to provide information on the feasible operating conditions of the process, the phase behavior of Dexran/DMSO/$CO_2$ is observed by measuring the cloud point in favor of a variable volume cell. From the experimental study, it is concluded that a feasible operating condition of the SAS process for preparation of dextran particles would be 300.15 K~330.15 K and 90 bar~130 bar, respectively, and solute concentration ranges from 5mg/ml to 20 mg/ml.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.131-135
• /
• 2002

Acetobacter xylinum KJ1 efficiently producing bacterial cellulose(BC) in shaking culture was isolated from a rotten grape. The strain was used to investigate optimum operating conditions for increasing BC production and factorial design model was employed for the optimization. The results of experiments were statistically analyzed by SAS program. Reciprocal effects of each factors(carbon source concentration, shaking speeds(rpm), oxygen pressure, and CSL concentration) and culture condition of BC production were examined by getting regression equation of the dependent variable. Comparisons between experimental results and predicted results about BC concentration were done in total 24 experiments by combination of each factors using SAS program, and the correlation coefficients of BC concentration and BC yield were 0.91 and 0.81, respectively. The agitated cultures were performed in various operation conditions of factors which affected considerably to BC production in jar fermentor. The results showed that BC concentration was 11.67g/ L in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 460rpm : 0.28 : 6%. On the other hand BC yield was 0.42g/g in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 564rpm : 0.21 : 2%. The BC production could be enhanced up to more than 65.3% by factorial design. The result of a verifying experiment under the optimal conditions determined by the factorial design to the BC production showed that the model was appropriate by obtaining BC concentration of 11.02g/L in the optimum condition

• Korean Journal of Environmental Agriculture
• /
• v.20 no.5
• /
• pp.352-357
• /
• 2001

Cadmium (Cd) has been identified as a potential contaminant in agricultural and environmental soils. Ionic condition in the soils is an important factor to influence Cd availability. In this study, the effect of sulfate or nitrate application on Cd sorption in acidic and calcareous soils was investigated. The Cd, sulfate $(SO_4)$, and nitrate $(NO_3)$ sources were solutions of $CdCl_2$, $K_2SO_4$, and $KNO_3$, respectively. The soil-solution system pH was affected by the application of sulfate or nitrate in both acidic and calcareous soil system, but there was not clear pH difference between pre- and simultaneous applications of sulfate or nitrate (PAS/PAN or SAS/SAN). Solution ionic strength (I) values were similar between the acid and calcareous soil systems after applying the Cd even though it was significantly different in the untreated control soils. However after applying the sulfate or nitrate, the I values increased and were always higher with SAS/SAN treatments. Solution Cd concentration also increased with the application of sulfate or nitrate. However, the Cd concentration in soil solution controlled by Cd sorption in the systems was different between PAS/PAN and SAS/SAN treatments only in the calcareous soil system, but not in the acidic soil system. The difference in Cd concentration between SAS/SAN and PAS/PAN in the calcareous systems may be caused by system pH, ionic strength, complexation, and predominately, competition of the $Cd^{2-}$ with the index $K^+$ ion. Potassium ion-Cd competition in the acidic soil system may be minimized because of the abundance of hydrogen ions.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.228-234
• /
• 2002

Acetobacter xylinum KJ1 efficiently producing bacterial cellulose(BC) In shaking culture was isolated from a rotten grape. The strain was used to investigate optimum operating conditions for increasing BC production and factorial design model was employed for the optimization. The results of experiments were statistically analyzed by SAS program. Reciprocal effects of each factors(carbon source concentration, shaking speeds(rpm), oxygen pressure, and CSL concentration) and culture condition of BC production were examined by getting regression equation of the dependent variable. Comparisons between experimental results and predicted results about BC concentration were done in total 24 experiments by combination of each factors using SAS program, and the correlation coefficients of BC concentration and BC yield were 0.91 and 0.81, respectively. The agitated cultures were peformed in various operation conditions of factors which affected considerably to BC production in jar fermentor. The results showed that BC concentration was 11.67 g/L in 80 hours cultivation under the condition of carbon source concentration : shaking speeds(rpm) : oxygen pressure : CSL concentration : 4% : 460 rpm : 0.28 : 6%. On the other hand BC yield was 0.42 g/g in 80 hours cultivation under the condition of carbon source concentration : shaking speeds(rpm) : oxygen pressure : CSL concentration : 4% : 564 rpm : 0.21 : 2%. The BC production could be enhanced up to more than 2.4 times by factorial design. The result of a verifying experiment under the optimal conditions determined by the factorial design to the BC production showed that the model was appropriate by obtaining BC concentration of 11.47 g/L in the optimum condition.