• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.439-439
• /
• 2022

인공위성은 위성통신, 기상 등 다양한 분야에서 활용되고 있지만 재난과 위성영상 특성 매칭의 제약으로 재난 상황에서는 제한적으로 사용되었다. 국내외 위성 갯수의 증가로 위성영상을 준-실시간으로 확보 가능함에 따라 활용할 수 있는 범위가 증가하여 최근에는 재난·재해에 신속하게 대비하기 위한 연구가 활발히 진행되고 있다. 본 연구는 재난 발생 지역의 위성 영상 확보를 위해 촬영된 영상과 미래시점의 촬영 예정인 영상의 촬영 예정 시간 및 영역을 빠른 시간 내 분석하여 최적 위성영상 확보에 기반이 되고자 한다. 행정안전부에서 분류한 재난·재해 유형에 따라 재난 예측, 탐지, 사후처리를 위한 위성자료의 확보를 위하여 다양한 위성과 탑재된 센서들의 궤도, 공간 해상도, 파장대 등의 위성영상의 적시성을 분석하여 최적 위성을 정의하였다. 위성 궤도 시뮬레이션은 TLE(Two Line Element) 정보를 이용하는 SGP4(Simplified General Perturbations version 4) 모델에 적용하여 개발하였다. 최신 TLE 정보를 이용하여 위성 궤도 정보 및 센서 정보(공간 해상도, Swath width, incidence angle IFOV 등)을 적용하였다. 수집된 위성 궤도 정보를 기반으로 위성의 궤도를 예측하여 예측된 위치에서의 촬영 영역을 산정하는 분석 기능을 수행하여 최종 시뮬레이션 데이터를 생성한다. 개발된 위성 궤도 시뮬레이션 알고리즘을 토대로 태풍 미탁 사례에 적용하였다. 위성 궤도 시뮬레이션 알고리즘을 태풍 미탁 사례에 적용한 결과 다종 위성리스트 중 위성 궤도 분석을 통해 최단기간 획득 가능한 위성 중 정지 궤도 기상위성인 Himawari-8, GK-2A는 태풍 경로 모니터링, 광학 위성인 Sentinel-2, PlanetScope는 건물 피해 지역, SAR 위성인 Sentinel-1, ICEYE는 홍수 지역을 탐지하는데 최적 위성 영상으로 분석되었다.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.1
• /
• pp.36-43
• /
• 2020

BACKGROUND: Wicheon watershed has the largest irrigation area among the mid-watershed of Nakdong river. However, no investigation of irrigation water quality has been conducted on the Wicheon watershed, which evaluates the effects on the soil quality and crop cultivation. Therefore, this study aims to provide various assessments of water quality of Wicheon watershed as the scientific basic data for efficient agricultural activities. METHODS AND RESULTS: Water sampling was performed in five locations of the first tributaries of Wicheon. Wicheon watershed showed clean water quality with very low organic matters and safe water quality from metals at all points of investigation. It was estimated that the natural chemical components of Wicheon watershed were originated from water-rock interaction in Gibbs diagram. All samples were concentrated in the type of Ca-HCO₃-Cl in the Piper diagram. The quality of irrigation water was evaluated with sodium adsorption ratio (SAR), residual sodium carbonate (RSC), permeability index (PI), and percent sodium (%Na). The values of these water quality indices were in the range of 0.37-0.67, -2.11--0.24, 41.13-84.52% and 11.28-21.84%, respectively, and were classified as good grades at all sites. CONCLUSION: The water quality of Wicheon watershed was very low in salt, indicating good irrigation water suitable for growing agricultural products. We hope that the results of this study will be used as the basic data for the cultivation of agricultural products and promotion of their excellence.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.1
• /
• pp.12-25
• /
• 2009

The aim of this study is to analyze the periodical and spatial characteristics of urban crime and to find out the factors that affect the crime occurrence. For these, crime data of Masan City was examined and crime occurrence pattern is ploted on a map using crime density and criminal hotspot analysis. The spatial relationship of crime occurrence and factors affecting crime were also investigated using ESDA (Exploratory Spatial Data Analysis) and SAR (Spatial Auto-Regression) model. As a result, it was found that crimes had strong tendency of happening during a certain period of time and with spatial contiguity. Spatial contiguity of crimes was made clear through the spatial autocorrelation analysis on 5 major crimes. Especially, robbery revealed the highest spatial autocorrelation. However as a autocorrelation model, Spatial Error Model(SEM) had statistically the highest goodness of fit. Moreover, the model proved that old age population ratio, property tax, wholesale-retail shop number, and retail & wholesale number were statistically significant that affect crime occurrence of 5 most major crimes and theft crime. However population density affected negatively on assault crime. Lastly, the findings of this study are expected to provide meaningful ideas to make our cities safer with U-City strategies and services.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.65-65
• /
• 2002

In remote sensing, images are acquired over the same area by sensors of different spectral ranges (from the visible to the microwave) and/or with different number, position, and width of spectral bands. These images are generally partially redundant, as they represent the same scene, and partially complementary. For many applications of image classification, the information provided by a single sensor is often incomplete or imprecise resulting in misclassification. Fusion with redundant data can draw more consistent inferences for the interpretation of the scene, and can then improve classification accuracy. The common approach to the classification of multisensor data as a data fusion scheme at pixel level is to concatenate the data into one vector as if they were measurements from a single sensor. The multiband data acquired by a single multispectral sensor or by two or more different sensors are not completely independent, and a certain degree of informative overlap may exist between the observation spaces of the different bands. This dependence may make the data less informative and should be properly modeled in the analysis so that its effect can be eliminated. For modeling and eliminating the effect of such dependence, this study employs a strategy using self and conditional information variation measures. The self information variation reflects the self certainty of the individual bands, while the conditional information variation reflects the degree of dependence of the different bands. One data set might be very less reliable than others in the analysis and even exacerbate the classification results. The unreliable data set should be excluded in the analysis. To account for this, the self information variation is utilized to measure the degrees of reliability. The team of positively dependent bands can gather more information jointly than the team of independent ones. But, when bands are negatively dependent, the combined analysis of these bands may give worse information. Using the conditional information variation measure, the multiband data are split into two or more subsets according the dependence between the bands. Each subsets are classified separately, and a data fusion scheme at decision level is applied to integrate the individual classification results. In this study. a two-level algorithm using hierarchical clustering procedure is used for unsupervised image classification. Hierarchical clustering algorithm is based on similarity measures between all pairs of candidates being considered for merging. In the first level, the image is partitioned as any number of regions which are sets of spatially contiguous pixels so that no union of adjacent regions is statistically uniform. The regions resulted from the low level are clustered into a parsimonious number of groups according to their statistical characteristics. The algorithm has been applied to satellite multispectral data and airbone SAR data.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_3
• /
• pp.1749-1760
• /
• 2022

In modern society, human and social damages caused by natural disasters and frequent disaster accidents have been increased year by year. Prompt access to dangerous disaster sites that are inaccessible or inaccessible using state-of-the-art Earth observation equipment such as satellites, drones, and survey robots, and timely collection and analysis of meaningful disaster information. It can play an important role in protecting people's property and life throughout the entire disaster management cycle, such as responding to disaster sites and establishing mid-to long-term recovery plans. This special issue introduces the National Disaster Management Research Institute (NDMI)'s disaster management technology that utilizes various Earth observation platforms, such as mobile survey vehicles equipped with close-range disaster site survey sensors, drones, and survey robots, as well as satellite technology, which is a tool of remote earth observation. Major research achievements include detection of damage from water disasters using Google Earth Engine, mid- and long-term time series observation, detection of reservoir water bodies using Sentinel-1 Synthetic Aperture Radar (SAR) images and artificial intelligence, analysis of resident movement patterns in case of forest fire disasters, and data analysis of disaster safety research. Efficient integrated management and utilization plan research results are summarized. In addition, research results on scientific investigation activities on the causes of disasters using drones and survey robots during the investigation of inaccessible and dangerous disaster sites were described.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.5
• /
• pp.673-681
• /
• 2024

The purpose of this study was to estimate the flood flow and the range of inundation in the downstream area of the Aprokgang(Riv.) that occurred in 2024 using satellite images. The study area was the Aprokgang(Riv.) watershed, the longest river in North Korea. Satellite image Sentinel-1A(SAR-C) data was used for flood analysis before and after the flood. As a result of the analysis of the inundation range using satellite images, it was confirmed that there was a change in the water surface before and after the flood. However, the image after the flood was taken six days after the peak discharge of the flood, so there are limitations in extracting the accurate extent of the flooding. As a result of the analysis using satellite precipitation and ground observed rainfall, the rainfall exceeded 500-year rainfall amount, and the peak-flow was simulated as 85,102 m³/s. As a result of analyzing the inundation range by using the contour lines from AW3D30, it was determined that the inundation occurred around the 15 m contour line. In the future, it is need to conduct a study that can extract more scientifically the inundation range through the use of the inundation analysis model.

• Computers and Concrete
• /
• v.12 no.5
• /
• pp.651-668
• /
• 2013

Concrete structures need repairing due to various reasons such as deteriorative effects, overloading, poor quality of workmanship and design failures. Cement based repair mortars are the most widely used solutions for concrete repair applications. Various factors may affect the bond strength between concrete substrate and repair mortars. In this paper, the effects of polymer additives, strength of the concrete substrate, surface roughness, surface wetness and aging on the bond between concrete substrate and repair mortar has been investigated. Full factorial experimental design is employed to investigate the main and interaction effects of these factors on the bond strength. Analysis of variance (ANOVA) under design of experiments (DOE) in Minitab 14 Statistical Software is used for the analysis. Results showed that the interaction bond strength is higher when the application surface is wet and strength of the concrete substrate is comparatively high. According to the results obtained from the analysis, the most effective repair mortar additive in terms of bonding efficiency was styrene butadiene rubber (SBR) within the investigated polymers and test conditions. This bonding ability improvement can be attributed to the self-flowing ability, high flexural strength and comparatively low air content of SBR modified repair mortars. On the other hand, styrene acrylate rubber (SAR) modified mortars was found incompatible with the concrete substrate.

• Structural Engineering and Mechanics
• /
• v.22 no.3
• /
• pp.371-399
• /
• 2006

The theoretical background and capabilities of the developed program, SAR-CWF, for stochastic analysis of 3D reinforced-concrete shear wall-frame structures subject to seismic excitations is presented. Incremental stiffness and strength properties of system members are modeled by extended Roufaiel-Meyer hysteretic relation for bending while shear deformations for walls by Origin-Oriented hysteretic model. For the critical height of shear-walls, division to sub-elements is performed. Different yield capacities with respect to positive and negative bending, finite extensions of plastic hinges and P-${\delta}$ effects are considered while strength deterioration is controlled by accumulated hysteretic energy. Simulated strong motions are obtained from a Gaussian white-noise filtered through Kanai-Tajimi filter. Dynamic equations of motion for the system are formed according to constitutive and compatibility relations and then inserted into equivalent It$\hat{o}$-Stratonovich stochastic differential equations. A system reduction scheme based on the series expansion of eigen-modes of the undamaged structure is implemented. Time histories of seismic response statistics are obtained by utilizing the computer programs developed for different types of structures.

• Steel and Composite Structures
• /
• v.2 no.3
• /
• pp.209-222
• /
• 2002

This paper describes the buckling phenomenon of a tubular truss with unsupported length through a full-scale test and presents a practical computational method for the design of the trusses allowing for the contribution of torsional stiffness against buckling, of which the effect has never been considered previously by others. The current practice for the design of a planar truss has largely been based on the linear elastic approach which cannot allow for the contribution of torsional stiffness and tension members in a structural system against buckling. The over-simplified analytical technique is unable to provide a realistic and an economical design to a structure. In this paper the stability theory is applied to the second-order analysis and design of the structural form, with detailed allowance for the instability and second-order effects in compliance with design code requirements. Finally, the paper demonstrates the application of the proposed method to the stability design of a commonly adopted truss system used in support of glass panels in which lateral bracing members are highly undesirable for economical and aesthetic reasons.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.2
• /
• pp.185-192
• /
• 2017

In this paper, we reviewed major design parameters for a solid type of deployable antenna and its structural design. We performed modal analysis for a single reflector panel made of aluminum and CFRP (carbon fiber reinforced plastic) to confirm the appropriateness of selected materials. We then predicted the elastic modulus of CFRP using the principles of unidirectional composite elasticity stiffness predictions such as the ROM (Rule of Mixture) and HSR (Hart Smith 10% Rule). To optimize the shape of the antenna reflector, a structural stiffness analysis was performed using derived numerical optimization factors. Six structural stiffness analyses were performed using the constructed experimental design method. The resulting optimal shape conditions are proposed to meet the structural stiffness requirements while minimizing weight.