• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.35-41
• /
• 2014

PURPOSES : Surface treatment is a favorable method in the pavement preventive maintenance. This study (Part I) aimed to develop the low viscosity filling material for waterproof characteristics and high penetrable and weather resistance, and a series of companion study (Part II) presents the coating characteristics and performance analysis using field and lab tests. METHODS : Hydrophobic characteristics of the advanced surface treatment material are observed and measured the filling depth and the permeability for sand and asphalt pavement specimen using the water absorption test and permeability test, X-RAY CT test. Color difference for the weather resistance using ultraviolet ray accelerated weathering test is compared with asphalt pavement specimens. RESULTS : The developed material shows the decreased water absorption and increased impermeable effect because of the hydrophobic characteristics. It is found that the filling depth is about 6mm and weather resistance is better than asphalt pavement specimen. CONCLUSIONS : The advanced hydrophobic - low viscosity filling treatment material is developed in this study (Part I) to improve the waterproof characteristics and high filling capacity and weather resistance for the pavement preventive maintenance.

• Journal of Ginseng Research
• /
• v.9 no.1
• /
• pp.36-41
• /
• 1985

The study was conducted to investigate the changes of soil physico-chemical properties between soils of preplanting fields and 2 years old ginseng fields, and compare the missing plant rate among the 2 years 016 ginseng fields. 1, The missing plant rate of 2 years old ginseng was high in sand loam while low in clay loam soil texture, soil porosity and NO3-N were remarkably increased in 2 years old ginseng field than preplanting soil, as the clay content was increased, soil porosity seemed to be increased but exchangeable nitrogen decreased. 2. The preplanting soil management methods did not significantly influenced on the missing plant rate and soil porosity in 2 years old ginseng fields, However NO3-N content and Fusarium density seemed to be decreased as the plow frequency was increased, exchangeable nitrogen content, whereas, seemed to be increased with more organic matter. 3. Differences of clay content (below 15% and above 20% of clay content) was significantly influenced on soil porosity, bulk density, total nitrogen, organic matter and P2O5 content. 4, Missing rate showed negative correlation with clay, soil moisture, and organic matter content but positive corelation with NO3-N in 2 years old ginseng fields.

• The Korean Journal of Quaternary Research
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2003

One hundred fifty six pieces of woods were excavated at the muddy sand layer (post-glacial age: about 8,800 bp) above the upper peat layer from Sarori, Chungwongun, Korea in the central Korea. Due to the deteriorated structure of peat woods, all samples were embedded in PEG(polyethylene glycol) 2000 and then sectioned using a rotary microtome. Only two species were found; Alnus spp.(95%) and Ulmus spp.(5%). No conifers were found. Species composition indicates that the climate condition of central Korean peninsula around 8,800 bp was little wetter condition. The sampled region at the Sarori appeared to be a swamp or riverside.

• Journal of Forest and Environmental Science
• /
• v.26 no.2
• /
• pp.117-129
• /
• 2010

The present study was undertaken in moist temperate forest of Mandal-Chopta area in the Garhwal region of Uttarakhand, India. The aim of the present study was to assess the physical properties of soils in relation to the forest structure and composition. Twelve forest types according to the altitude, slope aspect and species compositions were selected for the study. Physical properties of soil i.e., soil colour, soil texture (per cent of sand, silt and clay), moisture content, water holding capacity, porosity, bulk density (gm/$cm^3$) and void ratio were analyzed for three different depths viz., (i) 'upper' (0-10 cm), (ii) 'middle' (11-30 cm) and (iii) 'lower' (31-60 cm) in all the selected forest types. Phytosociological and diversity parameters viz. total basal cover ($Gha^{-1}$), stem density ($Nha^{-1}$), tree species richness, Simpson concentration of dominance and Shannon-Wiener diversity index were also calculated for each forest type. This study also provides the comparisons between the results of physical analysis of the present study with numerous other previous studies in the temperate Himalayan region of the Uttarakhand.

• The Korean Journal of Mycology
• /
• v.50 no.4
• /
• pp.319-329
• /
• 2022

In July 2020, wilting symptoms were observed among adzuki bean plants (Vigna angularis var. angularis L.) in the fields in Yeosu, Korea. Infected plants showed yellowing of leaves, browning inside the stems, splitting of stem bark, and wilting. When these plants were uprooted, their roots were found to be brown. The fungal pathogens NC20-737, NC20-738, and NC20-739 were isolated from symptomatic stem and root tissues. These pathogens were identified as a Fusarium fujikuroi species complex based on their morphological characteristics. Molecular identification was performed using the DNA sequence of translation elongation factor 1 alpha and the RNA polymerase II second largest subunit regions. The nucleotide sequences of all three isolates were similar to the F. fujikuroi reference isolates NRRL 13566 and NRRL 5538 of the National Centre for Biotechnology Information GenBank. A pathogenicity test was conducted by the soil inoculation method with cornmeal sand inoculum. Approximately 3 weeks after inoculation, symptoms were observed only in the inoculated adzuki bean seedlings. To the best of our knowledge, this is the first report of Fusarium root rot caused by F. fujikuroi in adzuki beans, both in Korea and worldwide.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.159-159
• /
• 2022

Soil represents a substantial component within the global carbon cycle and small changes in the SOC stock may result in large changes of atmospheric CO₂ particularly over tens to hundreds of years. In this study, we aim to (i) evaluate the SOC stock in the topsoil 0 - 15 cm from soil physical and chemical characteristics and (ii) find the correlation of SOC and soil organic matter (SOM) for national-scale in South Korea. First of all, based on the characteristics of the soil to calculate the soil hydraulic properties, SOC stock is the SOC mass per unit area for a given depth. It depends on bulk density (BD-g/cm³), SOC content (%), the depth of topsoil (cm), and gravel content (%). Due to insufficient data on BD observation, we establish a correlation between BD and SOC content, sand content, clay content parameter. Next, we present linear and non-linear regression models of BD and the interrelationship between SOC and SOM using a linear regression model and determine the conversion factor for them, comparing with Van Bemmelen 1890's factor value for the country scale. The results obtained, helps managers come up with suitable solutions to conserve land resources.

• Advances in materials Research
• /
• v.12 no.4
• /
• pp.287-308
• /
• 2023

The main objective of this article is to highlight the progress made in the development of new materials that have been gradually used by humans until today. Of course, this progress must be associated with other parameters in order to guarantee sustainable development. For this, today, it has become urgent to reduce the consumption of cement by resorting to its partial or total replacement by other similar materials in order to reduce CO₂ emissions in our environment. This should certainly help to develop greener building materials. In this study, it was decided to proceed with the partial or total replacement of Portland cement type CEM II/B-L-42.5N by slate and lime that had not undergone any previous transformation. The results obtained revealed that the mortar whose substitution compared to the replacement of cement (100%) cement and sand (0/4) confers better kinetics than those of the series composed of(100%) cement and fraction rubble (0/1).

• Earthquakes and Structures
• /
• v.26 no.5
• /
• pp.337-348
• /
• 2024

This paper presents a new seismic isolation design for liquid storage tank (LST). The seismic isolation system includes: LST, flexible membrane, sand mat and rolling seismic isolation devices. Based on the mechanical equilibrium theory, the symmetric concave rolling restoring force model of the isolation device is derived. Based on the elasticity theory and restoring force model of the seismic isolation, a simplified mechanical model of LST with the new seismic isolation is established. The rationality of the seismic isolation design of LST is explored. Meanwhile, the seismic response of the new seismic isolation LST is investigated by numerical simulation. The results show that the new seismic isolation tank can effectively reduce the seismic response, especially the control of base shear and overturning moment, which greatly reduces the risk of seismic damage. The seismic reduction rate of the new seismic isolation storage tanks in Class I, II, and III sites is better than that in Class IV sites. Moreover, the seismic isolation device can effectively control the ground vibration response of storage tanks with different liquid heights. The new seismic isolation LST design provides better isolation for slender LSTs than for broad LSTs.

• Journal of Korean Society of Forest Science
• /
• v.54 no.1
• /
• pp.25-35
• /
• 1981

Some physical and chemical properties of forest soils in Korea were analyzed for providing the reasonable management methods of forest lands, Among 375 soil series surveyed until 1979, 93 soil series of forest soils were classified and analyzed according to their characteristics. Firstly soil data were classified into 5 categories by weathered products and secondly were classified and analyzed by parent rocks. The results are as follows: 1) In forest soils characterized by weathered products volcanic ash soils were proved to be the most fertile and alluvial soils were turned out to be the most infertile soils. Residual soils on mountain and hill were mostly on the average in all kinds of soil properties analyzed except total soil depth. 2) Igneous rocks developed rather infertile soils containing large amount of organic matter and available $P_2O_5$ with relatively deep soil depth and strong acidity. On the other hand sedimentary rocks produced rather shallow soils containing small amount of organic matter and available $P_2O_5$ but they were relatively fertile with weak acidity. 3) Among igneous rocks basalt and trachyte produced very fertile soils and granite and andesite produced slightly infertile soils. 4) Among sedimentary rocks limestone soils had high fertility neutral in acidity but low amount of available $P_2O_5$ 6) Alluvial sand produced generally very infertile soils with great soil depth comparing with the arable alluvial land with high fertility.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.267-277
• /
• 1997

The purpose of this study was to evaluate the shear bond strength of light-cured glass ionomer cements to dentin surface according to curing time induced by argon laser. In this study, 160 extracted human molars with sound crown were used. The dentin surface of these teeth were exposed with high speed diamond bur under water spray and polished with 120, 320, 400, 800, 1200 grits sand paper. 160 extracted human molars were randomly assigned into four groups (control, experimental 1, 2 & 3) with 40 teeth each. Control group used a visible light curing unit, XL 1000(3M Co., U.S.A) and experimental groups used argon laser($SPECTRUM^{TM}$). And then each group subdivided into two groups (A, B) according to filling materials. Subdivided A group used Fuji II LC(GC Co., Japan), B group used Vitremer(3M Co., U.S.A). The curing units and curing time of each group were as follows : Control group : visible light, 40 seconds Experimental group 1 Experimental group 2 Experimental group 3 : argon laser, 10 seconds : argon laser, 20 seconds : argon laser, 30 seconds The glass ionomer cements were bonded to dentin surface of each specimen. The specimens were stored in 100% relative humidity at 37"c for 7days. And then, the shear bond strength were measured by universal testing machine(Shimatzu Co. Japan) at crosshead speed of 5mm/min and 100kg in full scale and analyzed statistically. The following results were obtained : 1. Experimental group 2-A showed the highest shear bond strength with $9.87{\pm}1.24$ kgf and control group B showed the lowest shear bond strength with $4.08{\pm}0.78$ kgf(P<0.01). 2. The Fuji II LC showed higher shear bond strength with $9.49{\pm}1.24$ kgf than that of the Vitremer with $4.23{\pm}1.24$ kgf. There was significant difference between Fuji II LC and Vitremer(p<0.01). 3. There was no significant differences among experimental groups according to curing time induced by argon laser. 4. There was no significant differences between control group and experimental groups according to curing units.