• Journal of Gastric Cancer
• /
• v.21 no.1
• /
• pp.30-37
• /
• 2021

Purpose: While the amylase concentration of the drainage fluid (dAmy) has been reported to be a predictor of postoperative pancreas-related complications (PPRC), the optimal timing for its measurement has not been fully investigated. Materials and Methods: The clinicopathological data of 387 patients who underwent elective gastrectomy for gastric cancer were reviewed. Laboratory data, including dAmy on postoperative days 1 (dAmy1) and 3 (dAmy3), and serum C-reactive protein (sCRP) concentrations on postoperative days 1 (sCRP1) and 3 (sCRP3) were compared between patients with PPRC and without PPRC. Results: Nineteen of the 387 patients (4.9%) developed PPRC. The optimal cutoff values of dAmy1, dAmy3, sCRP1, and sCRP3 were 1514 IU/L, 761 IU/L, 8.32 mg/dL, and 15.15 mg/dL, respectively. The area under the curve of dAmy1 was greater than that of dAmy3 (0.915 vs. 0.826), and that of sCRP3 was greater than that of sCRP1 (0.820 vs. 0.659). In the multivariate analysis, dAmy1 (P<0.001) and sCRP3 (P=0.004) were significant predictors of PPRC, while dAmy3 (P=0.069) and sCRP1 (P=0.831) were not. Thirteen (41.9%) of 31 patients with both dAmy1 ≥1,545 IU/L and sCRP3 ≥15.15 mg/dL had PPRC ≥Clavien-Dindo II. In contrast, among 260 patients with both dAmy1 <1,545 IU/L and sCRP3 <15.15 mg/dL, none developed PPRC. Conclusions: dAmy1 was more useful than dAmy3 in predicting PPRC. The combination of dAmy1 and sCRP3 may be a useful criterion for the removal of drains on postoperative day 3.

• Journal of Information Display
• /
• v.12 no.3
• /
• pp.159-165
• /
• 2011

This research entailed the production of stereoscopic 3D (S3D) contents using 2D-to-S3D conversion for exhibition at a museum and subjective evaluation. Hybrid production combining S3D images of existing live-action videos using the 2D-to-S3D conversion technology and computer graphic ones created via stereo rendering was conducted. Design and control of the chronological analysis of the parallactic angle was conducted on the produced contents, using binocular information as well as subjective evaluations, with the intent of conducting an investigation on the characteristics of such contents from the perspectives of the producers and viewers. An investigation was also conducted on the effects of the viewing position on the impressions of the S3D images.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.167-178
• /
• 2011

This study is an empirical study approach to investigating impact of 3D stereoscopic film's customer satisfaction. Using conventional methods, there were identified 3D stereo films's factors that character, story, dialogue, music, and 3D technical factors. And There were trying to analyze the impactive gaps of 3D stereoscopic film's customer satisfaction between high participation and low participation of customers about 3D film's. The results of this study can be summarized broadly as follows. First, the story and 3D technical factors was high-impact of customer's satisfaction at watching the 3D films. Second, 3D technical factors were highly correlated with customer satisfaction at the low participation group. And 3D technical factors and story were highly correlated with customer satisfaction at the high participation group. The conclusion is expected to provide useful suggestions about the selection of variables at the future 3D film study.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.2
• /
• pp.85-90
• /
• 2013

This study was conducted to examine the basis for the information to select the suitable potato varieties grown in new reclaimed land. The potatoes of five varieties were planted in the port with 4 different electrical conductivities of saturated extracts of soil taken the Saemangeum reclamation area, which was made of non-treatment salt and three concentrations of salt treatment, 1.6 dS $m^{-1}$, 3.2 dS $m^{-1}$, 4.8 dS $m^{-1}$, respectively. All of the potato varieties were uniformly emerged without missing plant in all treatment groups, even 4.8 dS $m^{-1}$ treatment group. According to the salt concentration of soil, required date to the emergence of the potato comparing to non-treatment salt was delayed 3-4 days in 1.6 dS $m^{-1}$, 6-10 days in 3.2 dS $m^{-1}$, 7-13 days in 4.8 dS $m^{-1}$, respectively, and the number of its branch decreased by 14-58% comparing to non-treatment salt depending on varieties. Since the increase of the salt concentration of the soil was more serious the decrease of the number of its branch, but plant height tended to increase when branch number per plant was small, which was depending on more number of its branch than salt concentration. Fresh tuber yield of potato comparing to non-treatment salt were decrease 33.7% in 1.6 dS $m^{-1}$, 59.5% in 3.2 dS $m^{-1}$, 79.3% 7-13 days in 4.8 dS $m^{-1}$, respectively. The threshold EC starting the growth inhibition of fresh weight decreased was 1.2 dS $m^{-1}$ for Chudong, 1.8 $m^{-1}$ for Chubeak, 1.9 $m^{-1}$ for Chugang and Chuyeong, and 2.0 $m^{-1}$ for Sumi, and EC which decreased 50% of dry weight index was 2.4 dS $m^{-1}$ for Chubaek, 2.45 dS $m^{-1}$ for Chudong, 2.81 dS $m^{-1}$ for Chugang, 3.03 dS $m^{-1}$ for Chuyeong, and 3.29 dS $m^{-1}$ for Sumi. The present results suggest that Sumi is considered to the suitable potato variety grown on saline soils.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.61-71
• /
• 2015

Purpose : 3D Printers are used to create three-dimensional models based on blueprints. Based on this characteristic, it is feasible to develop a bolus that can minimize the air gap between skin and bolus in radiotherapy. This study aims to compare and analyze air gap and target dose at the branded 1 cm bolus with the developed customized bolus using 3D printers. Materials and Methods : RANDO phantom with a protruded tumor was used to procure images using CT simulator. CT DICOM file was transferred into the STL file, equivalent to 3D printers. Using this, customized bolus molding box (maintaining the 1 cm width) was created by processing 3D printers, and paraffin was melted to develop the customized bolus. The air gap of customized bolus and the branded 1 cm bolus was checked, and the differences in air gap was used to compare $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$ and $V_{95%}$ in treatment plan through Eclipse. Results : Customized bolus production period took about 3 days. The total volume of air gap was average $3.9cm^3$ at the customized bolus. And it was average $29.6cm^3$ at the branded 1 cm bolus. The customized bolus developed by the 3D printer was more useful in minimizing the air gap than the branded 1 cm bolus. In the 6 MV photon, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 102.8%, 88.1%, 99.1%, 95.0%, 94.4% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 101.4%, 92.0%, 98.2%, 95.2%, 95.7%, respectively. In the proton, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 104.1%, 84.0%, 101.2%, 95.1%, 99.8% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 104.8%, 87.9%, 101.5%, 94.9%, 99.9%, respectively. Thus, in treatment plan, there was no significant difference between the customized bolus and 1 cm bolus. However, the normal tissue nearby the GTV showed relatively lower radiation dose. Conclusion : The customized bolus developed by 3D printers was effective in minimizing the air gap, especially when it is used against the treatment area with irregular surface. However, the air gap between branded bolus and skin was not enough to cause a change in target dose. On the other hand, in the chest wall could confirm that dose decrease for small the air gap. Customized bolus production period took about 3 days and the development cost was quite expensive. Therefore, the commercialization of customized bolus developed by 3D printers requires low-cost 3D printer materials, adequate for the use of bolus.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.7-13
• /
• 2020

Purpose: This study was to evaluate marginal and internal discrepancy of 3-unit fixed dental prostheses (FDP) fabricated by subtractive manufacturing and additive manufacturing. Materials and methods: 3-unit bridge abutments without the maxillary left second premolar were prepared (reference model) and the reference model scan data was obtained using an intraoral scanner. 3-unit fixed dental prostheses were fabricated in the following three ways: Milled 3-unit FDP (MIL), digital light processing (DLP) 3D printed 3-unit FDP (D3P), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P). To evaluate the marginal/internal discrepancy and precision of the prosthesis, scan data were superimposed by the triple-scan protocol and the combinations calculator, respectively. Quantitative and qualitative analysis was performed using root mean square (RMS) value and color difference map in 3D analysis program (Geomagic control X). Statistical analysis was performed using the Kruskal-Wallis test (α=.05), MannWhitney U test and Bonferroni correction (α=.05/3=.017). Results: The marginal discrepancy of S3P group was superior to MIL and D3P groups, and MIL and D3P groups were similar. The D3P and S3P groups showed better internal discrepancy than the MIL group, and there was no significant difference between the D3P and S3P groups. The precision was excellent in the order of MIL, S3P, and D3P groups. Conclusion: Within the limitation of this study, the 3-unit fixed dental prostheses fabricated by additive manufacturing showed better marginal and internal discrepancy than the those of fabricated by subtractive manufacturing, but the precision was poor.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.851-858
• /
• 2014

Muscat Bailey A (MBA) wine was fermented using the indigenous Korean Saccahromyces cerevisiae strains S13 and D8, and the fermentation characteristics were compared with those of S. cerevisiae W-3, an industrial wine yeast. The strains S13 and D8 showed delayed alcohol fermentation compared with the W-3 strain, but the final alcohol contents of the S13 and D8 wines after fermentation were similar to those of the W-3 wine. The S13 wine showed significantly lower malic-acid content than the W-3 wine, but the D8 wine showed a similar level. Both the wines fermented using the S13 and D8 strains showed significantly lower acetaldehyde, methanol, and fusel oil contents, including n-propanol, iso-butyl alcohol, and iso-amyl alcohol, compared to the W-3 wine. Especially, the methanol content was 98.6 mg/L in the S13 wine and 112.0 mg/L in the D8 wine, which were much lower than 192.8 mg/L in the W-3 wine. The S13 wine obtained the highest score in terms of color among the three wines in the sensory evaluation, with lower Hunter's L, a, and b values compared to the W-3 wine.

• Electronics and Telecommunications Trends
• /
• v.31 no.1
• /
• pp.134-145
• /
• 2016

최근 3D 프린팅이 제조업의 혁신을 이끌 새로운 키워드로 주목을 받으면서 하드웨어인 3D 프린터를 비롯해 각종 프린팅 재료, 프린팅 대상을 만들 수 있는 3D 저작 및 편집 소프트웨어에 이르기까지 관련 분야에 대한 관심과 지원이 빠르게 확산되는 추세다. 특히, 개인의 아이디어를 3D 프린터로 직접 출력할 수 있다는 점이 강조되면서 개인용 3D 콘텐츠 제작을 위해 필요한 저작/편집도구의 수요가 급격히 증가하고 있다. 더불어 3D 프린팅 출력 대상이 개인화되고 사용자의 기호에 따른 맞춤형으로 변하면서, 3D 콘텐츠 제작에 필수적인 소프트웨어 개발 업체의 영향력이 하드웨어 제조사보다 더욱 커지고 있다. 3D 프린팅 관련 세계적 기술 및 수요 변화에 발맞춰 본고에서는 3D 프린팅용 콘텐츠를 제작할 수 있는 3D 저작/편집도구 및 연구동향을 살펴보고, 다양한 응용을 목적으로 ETRI에서 개발 중인 3D 프린팅용 편집기술을 소개하고자 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.338-345
• /
• 2001

An experiment was conducted to determine the optimal inclusion ratio of spray dried plasma protein (SDPP) and dried porcine solubles (DPS) for maximizing growth and improving immunity in weaned pigs. One hundred-fifty male (barrow) pigs were allotted in a completely randomized block design. Treatments were as follows: 1) control (6% SDPP), 2) S6D6 (6% SDPP+6% DPS), 3) S6D3 (6% SDPP+3% DPS), 4) S3D6 (3% SDPP+6% DPS) and 5) S3D3 (3% SDPP+3% DPS). Each treatment has 6 replicates with 5 pigs per replicate. Average daily gain (ADG) and average daily feed intake (ADFI) were highest, but not significantly different when pigs were fed a diet contained 6% SDPP and DPS from d 0 to 7 after weaning. Pigs fed the S6D3 diet showed better weight gain and feed intake than other treatments, especially compared with pigs fed S3D6 diet (p<0.05) from d 8 to 21 after weaning. For the overall experimental period, pigs fed the S6D3 diet showed the best improvement in ADG and ADFI. The digestibilities of dry matter (DM) and crude protein (CP) were higher in pigs fed the S6D6 diet than other diets from d 0 to 7 after weaning. However, pigs fed S6D3 diet showed higher DM, CP and essential amino acids (except methionine and arginine) digestibilities than pigs fed other diets from d 8 to 21 after weaning, although there was no significant difference. From d 8 to 21 after weaning, threonine, valine, isoleucine and leucine digestibilites were higher in S6D6 group, and phenyalanine, histidine, lysine and arginine digestibility were higher in S6D3 group than other groups. The ratio of CD4 and CD8 positive lymphocytes during the overall experimental period was independent of the ratio of SDPP and DPS. However, CD4+:CD8+ ratio was numerically lowered in pigs fed diet the S6D3 diet. Therefore, the present study suggests that an optimal inclusion ratio for maximizing growth performance and maintaining low immune status is 6% of SDPP and 3% of DPS in weaned pigs.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.311-316
• /
• 2011

This study aimed to determine the effect of EC (electrical conductivity) levels of nutrient solution in hydroponic culture on allyl-isothiocyanate (AITC) content within plant tissues, Vitamin C content and physiological responses in wasabi plant (Wasabia japonica M. 'Darma'). The 'Darma' was grown for 5 weeks with a deep flow technique (DFT) system controlled at 5 different EC levels, including 0.5, 1, 2, 3, and $5dS{\cdot}m^{-1}$. In result, the highest total content of AITC showed at EC level 5 and $3dS{\cdot}m^{-1}$ for 1 or 5- week, respectively. The total content of AITC increased about 1.2-1.4 times when the plants were grown in the EC levels between 0.5 and $2dS{\cdot}m^{-1}$, whereas the content decreased about 6 and 56 % in the EC level 3 and $5dS{\cdot}m^{-1}$, respectively. The content of AITC was relatively higher in petiole tissue, about 53 %, taken from 1 week-grown plants when the EC was controlled between 0.5 and $2dS{\cdot}m^{-1}$. Root tissue also had relatively higher content of AITC, about 45.1 %, when the EC was controlled at 3 and $5dS{\cdot}m^{-1}$. However, a 5-fold decrease in the AITC content was found in blade tissue and a 6.8-fold decrease in root when the EC was controlled at $5dS{\cdot}m^{-1}$ for 5 weeks. There was no significant difference in the vitamin C content in 1-week grown leaf tissues under the different EC level treatments; but, the content increased about 27% in 5-week grown plants at the EC level between 0.5 and $2dS{\cdot}m^{-1}$, compared to the 1 week-grown leaf tissue. Electrolyte leakage of leaf tissue taken from 3-week grown plant was 3-fold higher at the EC level $5dS{\cdot}m^{-1}$, compared to the EC level between 0.5 and $2dS{\cdot}m^{-1}$. Chlorophyll content, photosynthesis rate and transpiration rate were decreased when the EC was controlled at higher than $2dS{\cdot}m^{-1}$. Leaf water content, specific leaf area and growth were decreased when the EC was controlled at $5dS{\cdot}m^{-1}$ for 5 weeks. All the integrated results in this study suggest that the EC level of nutrient solution should be maintained at lower than $3dS{\cdot}m^{-1}$ in order to improve nutritional value and quantity required for hydroponically grown wasabi as functional vegetable.