Journal of the Korean Society of Clothing and Textiles
/
v.31
no.1
s.160
/
pp.57-67
/
2007
The purpose of this study is to find out the better washing condition, especially on detergent contents to satisfy the consumer's concern on fabric hand using Drum Type Washer. The hand and preference of washed fabrics by various detergent contents were analyzed through subjective evaluation using questionnaire method in dry and wet state. Wine rank's semantic differential scale questions were developed with 27 kinds of adjective pairs and seven rank's scale questions were to evaluate preference of washed fabrics oil holistic touch, washing and rinsing effect and purchase intention of detergent. Group of trained panelists and untrained women panelists of $30{\sim}40$ years old were participated. The factors affecting consumer's taste for the washed fabrics were analyzed by SPSS 12.0. Smoothness showed relatively higher correlation with preference of washed fabrics on holistic touch, washing and rinsing effect and purchase intention of detergent. There were significant differences in preference of washed fabrics on holistic touch, washing and rinsing effect and purchase intention of detergent by detergent contents when tested in wet state. Fabrics washed with detergents of non-zeolite were appeared to be the preferred ones.
This paper suggests a new paradigm of science and technology (S&T) policy for the purpose of the new national development that pursues not the scale expansion of a industrial production but the qualitative enhancement of industrial and S&T comparativeness. The new S&T policy paradigm includes new policy directions such as the density increasement of high quality- brain power and the energy supply for crossing the threshold from imitative R&D to creative R&D. Also, this paper argues that it is necessary not only to acquire the support of the local S&T community and policy-makers on the new S&T policy paradigm, but also to develop and implement policy measures in details on the basis of the new paradigm suggested by the paper.
A pre-load of bracing was imposed to prevent the horizontal displacement on the strut of the braced wall adjacent to the building during the ground excavation. For this purpose, large scale model tests were conducted, without and with pre-load on braced wall. Adjacent building load was also imposed in different locations, that were 0 m, 1D, 2D on ground surface. In this study, model tests in 1:10 scale were performed in real construction sequences, and adjacent building was 12 m in width and the size of model test pit was 2 m in width, 6 m in height, and 4 m in length. As a result, it was found that the stability of the existing building adjacent to the braced wall within Rankine's active zone could be greatly enhanced when the horizontal displacement of the braced wall was reduced by applying a pre-load. which was larger than the designated axial force on the strut of the braced wall.
Lemya Hanifi Hachemi Amar;Abdelhakim Kaci;Aicha Bessaim;Mohammed Sid Ahmed Houari;Abdelouahed Tounsi
Structural Engineering and Mechanics
/
v.89
no.3
/
pp.225-238
/
2024
In this paper, a quasi-3D hyperbolic shear deformation theory for the bending responses of a functionally graded (FG) porous micro-beam is based on a modified couple stress theory requiring only one material length scale parameter that can capture the size influence. The model proposed accounts for both shear and normal deformation effects through an illustrative variation of all displacements across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the micro-beam. The effective material properties of the functionally graded micro-beam are assumed to vary in the thickness direction and are estimated using the homogenization method of power law distribution, which is modified to approximate the porous material properties with even and uneven distributions of porosity phases. The equilibrium equations are obtained using the virtual work principle and solved using Navier's technique. The validity of the derived formulation is established by comparing it with the ones available in the literature. Numerical examples are presented to investigate the influences of the power law index, material length scale parameter, beam thickness, and shear and normal deformation effects on the mechanical characteristics of the FG micro-beam. The results demonstrate that the inclusion of the size effects increases the microbeams stiffness, which consequently leads to a reduction in deflections. In contrast, the shear and normal deformation effects are just the opposite.
It has been noted that a genetic alteration of cells influenced by unhealthy lifestyle In addition to a series of other carcinogens increases various neoplasmic diseases. Therefore the importance of lifestyle that minimizes such impact on health should be emphasized. Since stomach cancer, the most common neoplasmic disease in Korea, is re-lated to the Korean lifestyle and as there's a possibility of its recurrence, people with stomach cancer need to lead a healthy lifestyle. The purpose of this study is to provide a basis for nursing intervention strategies to promote health promoting behaviors that are constructive to a healthy lifestyle. A multivariate model was constructed based on the fender's health promotion model and Booker's health belief model by including influential factors such as hope. The sample was composed of 164 patients with stomach cancer who visited outpatient clinics of a university hospital in Seoul. The following instruments were used in the study after some adaptation : Wallston and others' multidimensional health locus of control scale Laffrey's health conception scale, Lawston and others' health self- rating scale, Walker and others' health promotion lifestyle profile and Rogenberg's self esteem scale. In addition Moon's health belief scale was used with some modification. For self efficacy, the present author constructed a self-efficacy scale based on previous research. The above mentioned instruments were tested in a pilot study with 24 patients with stomach cancer. The reliabilities of instruments were tested with Cronbach's alpha(0.574∼0.949). Data were analyzed using a SAS program (or Pearson correlation coefficients, descriptive correlational statistics and stepwise multiple regression. The results are as follows : 1. The scores on the health promoting behavior scale ranged from 55 to 145 with a mean of 107.91 (S. D : 16.50). The mean scores(range 1-4) on the different dimensions were nutrition 3.14, exercise 2.48, stress management 2.69, health responsibility 2.65, interpersonal relationship 2.878E self actualization 2.85. 2. There were significant correlations among all the predictive variables & the health promoting behavior (r=.20-.55, p〈.01) 3. Stepwise multiple regression analysis showed that : 1) Hope was the main predictor and accounted for 29.8% of the total variance. 2) Self efficacy, perceived barriers & self esteem accounted for an additional 14.6% of the total variance. 3) Hope, self efficacy, perceived barriers & self esteem altogether accounted for 44.3% of the total variance. In conclusion, hope, self efficacy, perceived barriers & self esteem were identified as important variables that contributed to promote health promoting behavior.
Journal of the Korea Academia-Industrial cooperation Society
/
v.14
no.8
/
pp.3897-3906
/
2013
The purpose of this study was to identify the rate and influencing factors on antepartum depression in pregnant women. A self-administered questionnaire-based study was performed in 160 pregnant women who visited outpatient clinics or attended special lectures of the general hospital in D metropolitan city. All participants were interviewed using the Korean version of Edinburgh Postnatal Depression Scale(EPDS). The data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficients, and stepwise multiple regression. On the results, the mean score of antepartum depression was $7.80{\pm}4.86$ scores(0-30 scores). The percentage of all participants for EPDS scale were 56.3% with normal level, 20.6% with a boundary line and 23.1% with serious level. Influencing factors on antepartum depression were accounted for 36.7% of the total variance which consisted of perceived health status, pregnancy stress and self esteem. The results indicate that these variables should be considered in preventing depression of pregnant women.
The HTS power cable is composed of 2 layers for transmission and 1 layer for shield. The superconducting tapes of transmission layers and shield layer are wound in a cylindrical shape with a winding pitch. The radius of cylinder and the number of superconducting tapes are decided considering to the transmission current capacity and the critical current of superconducting tapes. The increasement of transmission current capacity will increase in volume of HTS cable system. In this paper, the composition method of supercondcuting power cable using the multi-cable is presented. The coated conductor tape can be wound on the smaller cylinder because it has the smaller critical bending diameter than the BSCCO tape. A small-scale cable was composed using the coated conductor tapes and a multi-cable is composed using a small-scale cable considering to transmission current capacity. Even increase of transmission current capacity, this method has advantage that the HTS superconducting power cable can be composed easily. The 22.9 kV and 154 kV superconducting power cable was composed using the presented method.
Park, S.J.;Lee, J.;Jung, H.J.;Jang, D.D.;Kim, S.D.
Wind and Structures
/
v.12
no.4
/
pp.313-332
/
2009
This paper numerically and experimentally investigates the control performance of the active mass damper (AMD) systems in a 26-story high-rise building in use. This is the first full-scale application of the AMD system for suppressing the wind-induced vibration of a building structure in Korea. In addition, the AMD system was installed on top of the building already in use, which may be the world's first implementation case. In order to simultaneously mitigate the transverse-torsional coupled vibration of the building, two AMD systems were applied. Moreover, the H-infinity control algorithm has been developed to utilize the maximum capacity of the AMD system. From the results of numerical simulation using the wind load obtained from the wind tunnel tests, it was found that the maximum acceleration responses of the building were reduced significantly. Moreover, the control performance of the installed AMD system was examined by carrying out the free and forced vibration tests. The acceleration responses on top of the building in the controlled case measured under strong wind loads were compared with those in the uncontrolled case numerically simulated by using the wind load deduced from the measured data and a structural model of the building. It is demonstrated that the AMD system shows good control performance in reducing the building accelerations.
Kim, Doo-Yeoun;Jung, Jae-Jin;Lim, Shin-Il;Kim, Su-Ki
The Transactions of The Korean Institute of Electrical Engineers
/
v.59
no.2
/
pp.355-358
/
2010
As CMOS technology continues to scale down, signal processing is favorably done in the digital domain, which requires Analog-to-Digital (A/D) Converter to be integrated on-chip. This paper presents a design methodology of 12-bit 1-MS/s Rail-to-Rail fully differential SAR ADC using Deep N-well Switch based on binary search algorithm. Proposed A/D Converter has the following architecture and techniques. Firstly, chip size and power consumption is reduced due to split capacitor array architecture and charge recycling method. Secondly, fully differential architecture is used to reduce noise between the digital part and converters. Finally, to reduce the mismatch effect and noise error, the circuit is designed to be available for Rail-to-Rail input range using simple Deep N-well switch. The A/D Converter fabricated in a TSMC 0.18um 1P6M CMOS technology and has a Signal-to-Noise-and-Distortion-Ratio(SNDR) of 69 dB and Free-Dynamic-Range (SFDR) of 73 dB. The occupied active area is $0.6mm^2$.
Journal of the Korean Regional Science Association
/
v.9
no.1
/
pp.65-78
/
1993
In this study, the significant and enduring concentration of federal R&D spending in metro-scale clusters across the nation is treated as evidence of the operation of a distinct industrial infrastructure defined by the ability of R&D performers to attract external funding and pursue the sophisticated project work demanded. It follows, then, that the agglomerative potential of these R&D concentrations -- performers and their support infrastructures -- requires a search for economic impacts guided by a different stimulative effects attributable to federal R&D spending may be that substantial subnational economic impacts are routinely obscured and diluted by research designs that seek to discover impacts either at the level of nation-scale economic aggregates or on firms or specific industries organized spatially. Therefore, this study proceeds by seeking to link the locational clustering of federal contract R&D spending to more localized economic impacts. It tests a series of models(X-IV) designed to trace federal contract R&D spending flows to economic impacts registered at the level of metro-regional economies. By shifting the focus from funding sources to recipient types and then to sector-specific impacts, the patterns of consistent results become increasingly compelling. In general, these results indicated that federal R&D spending does indeed nurture the development of an important nation-spanning advanced industrial production and R&D infrastructure anchored primarily by two dozed or so metro-regions. However, dominated as it is by a strong defense-industrial orientation, federal contract R&D spending would appear to constitute a relatively inefficient national economic development policy, at least as registered on conventional indicators. Federal contract R&D destined for the support of nondefense/civilian(Model I), nonprofit(Model II), and educational/research(Mode III) R&D agendas is associated with substantially greater regional employment and income impacts than is R&D funding disbursed by the Department of Defense. While federal R&D support from DOD(Model I) and for-profit(Model II) and industrial performer(Model III) contract R&D agendas are associated with positive regional economic impacts, they are substantially smaller than those associated with performers operating outside the defense industrial base. Moreover, evidence that the large-business sector mediates a small business sector(Model VI) justifies closer scrutiny of the relative contribution to economic growth and development made by these two sectors, as well as of the primacy typically accorded employment change as a conventional economic performance indicator. Ultimately, those regions receiving federal R&D spending have experienced measurable employment and income gains as a result. However, whether or not those gains could be improved by changing the composition -- and therefore the primary missions -- of federal R&D spending cannot be decided by merely citing evidence of its economic impacts of the kind reported here. Rather, that decision turns on a prior public choice relating to the trade-offs deemed acceptable between conventional employment and income gains, the strength of a nation's industrial base not reflected in such indicators, and the reigning conception of what constitutes national security -- military might or a competitive civilian economy.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.